Ridgid
Elyria, OH 44035
Orbit Sander utilizes 3 A permanent magnet motor.
Model R2600 5 in. Random Orbit Sander features electronic speed control ranging from 7,000-12,000 rpm, which provides feedback to maintain constant speed under any load. Soft start/pad brake system prevents surface damage on start-up and shut down. Micro Fiber(TM) hook and loop pad feature eliminates dust build-up. Sander includes 12 ft rubber power cord, which stays flexible in cold weather, and...
Read More »
Cordless Drills include 20-min Rapid Max Charger(TM).
Available in 12, 14.4, and 18 V models, 3/8 in. drills include 2 NiCad battery packs; die-cast, 24-position clutch ring; and self-ejecting battery pack feature. Products deliver torque from 350-460 lb-in. depending on model. Both 14.4 and 18 V models have 360Ã-
Read More »
Spade Handle Drill has 1/2 in. keyed chuck.
Model R7120 Heavy Duty Spade Handle Drill is equipped with 7.5 A motor that operates at speeds from 0-500 rpm and has hardened steel gears, triple gear reduction, and 5/8 in. spindle. Suited for large-bore drilling and mud mixing, tool offers externally accessible brushes, Ã-½ in. keyed chuck, lock-on button, and forward/reverse rocker switch. Unit also comes with 3-position auxiliary handle...
Read More »
Circular Saw includes rubberized cord package.
Model R3200 7Ã-¼ in. Circular Saw is equipped with 15 A motor operating at speeds up to 5,800 rpm. Positive bevel stop at 45Ã-
Read More »
Electric Drill provides two variable speeds.
Model R7100 Heavy Duty Ã-½ in. Drill features hardened steel gears and 9 A motor that handles operation in dusty, abusive jobsites. Auto-stop brushes halt drill's operation when brushes are worn, before they damage motor. Automatic safety clutch protects user from kickback if bit accidentally jams. Two variable speeds, 0-1,000/0-3,000 rpm, permit screw driving and drilling. Model R7100...
Read More »
Reciprocating Saw offers variable speed.
Model R3000 features 9 A of power, variable speed trigger switch, and 3 bi-metal blades for cutting through wood and steel. User can change speed in middle of cut, even when running at 2,800 strokes/min. Pivoting shoe adjusts with Allen wrench and can be moved in and out, depending on application. Saw includes overmolded front and rear rubber grips, die-cast gear housing, double insulation, and...
Read More »
Quarter Sheet Sander features permanent magnet motor.
Model R2500 operates on 2.4 A motor, which provides quiet power source with little vibration. Oversized, quick release tabs secure standard paper onto sander. Dust collection is provided by active through-the-pad collection and screw on dust bag. Dust-sealed slide switch allows user to verify if tool is on or off, preventing accidental start-up. Sander includes 12 ft flexible rubber power cord,...
Read More »
VSR Hammer/Pulse Drill offers two modes of operation.
RIDGID-® heavy-duty, -½ in. Model R5010 has 2 dials that control torque and speed. When it senses need for slow, high-torque drilling, it switches into pulse mode. Drill uses 9 A Extended Motor Life motor; impact-grade, keyless chuck with spring-loaded internal clamp; and RIDGID auto-stop brushes. Drill features automatic safety clutch and has 2 variable speeds: 0-1,000 and 0-3,000 rpm. For...
Read More »
Angle Grinder operates in harsh conditions.
Model R1000 Heavy Duty 4Ã-½ in. Angle Grinder features die-cast gearbox and 8 A motor, which allows grinder to operate in dusty, abusive jobsite conditions. Motor has auto-stop brushes that halt grinder's operation when brushes are worn, before they damage motor. Automatic safety clutch protects user from sudden kickback if wheel accidentally binds. Grinder includes spindle lock, 2-position...
Read More »
Transmitter can be used with NaviTrack(TM) line locator.
Transmitter simplifies line tracing with push-button operation, lightweight design, and rugged construction. With 3 trace frequencies, product is designed for use with NaviTrack line locator, which uses 6-antenna technology, to locate trace wires, metallic water lines, phone lines, cable TV lines, and other metallic lines.
Read More »