Creative Materials, Inc.

Creative Materials' Conductive Inks/Coatings are stretchable and breathable.
Packaging Products & Equipment

Creative Materials' Conductive Inks/Coatings are stretchable and breathable.

Creative Materials’ Conductive Inks/Coatings are offered in 127-48 (silver), 127-48E (silver/silver chloride) and 127-48LR (carbon) variants. These inks can withstand minimum of 50 machine wash and heated dryer cycles. These series coatings can be printed onto synthetic fabrics such as polyester, spandex and nylon. Coatings/Inks are suitable for electrodes, biosensors, heart rate monitoring,...

Read More »
127-41 Pressure Sensitive Adhesive is suitable for polymer thick film circuits.
Adhesives & Sealants

127-41 Pressure Sensitive Adhesive is suitable for polymer thick film circuits.

127-41 UV Curable Conductive Pressure Sensitive Adhesive is suitable for printed and medical electronics, RFID, touch screens and electronic circuitry applications. This high peel strength and 100 percent solid unit offers stability against heat and humidity. Product can be used with pick and place equipment or chip shooters and is ideal for electrical attachment of surface-mounted devices, smart...

Read More »
Conductive Medical Electrode Ink/Coating is chemical resistant.
Packaging Products & Equipment

Conductive Medical Electrode Ink/Coating is chemical resistant.

Intended for sensors as well asÂ- ECG, EEG, TENS, and defibrillator electrodes, 113-09(S) consists of single-component, medical-grade, silver-silver chloride (Ag-AgCl) ink and coating. It adheres to polyimide and polyester films as well as other high-energy substrates and exhibits optimal aging characteristics when used with high-salt content hydrogels. Also exhibiting flexibility and crease...

Read More »
Electrically Conductive Inks and Coatings come in primary colors.
Packaging Products & Equipment

Electrically Conductive Inks and Coatings come in primary colors.

Resistant to abrasion, scratching, flexing, and creasing, 126-29 series serves applications where electrical conductor is required and appearance of graphics arts is desired. Red, blue, and yellow colors with 5 Ω/sq./mil max sheet resistivity are available and exhibit color stability as well as minimal opportunity for surface transfer of conductive particles. Applied by screen-printing, dipping,...

Read More »
Electrically Conductive Inks suit wearable electronics.
Adhesives & Sealants

Electrically Conductive Inks suit wearable electronics.

Adhering to variety of natural and synthetic fibers, 125-19FSÂ- consists of flexible, screen-printable, silicone-based conductive ink that offers low-temperature performance to -70°C, and high temperature properties up to 325°C. Screen-printable 120-07 Ink is extremely conductive with optimal creasing resistance and washability features. Adhering to fabric substrates,...

Read More »
Die-Attach Adhesives offer optimized rheology.
Adhesives & Sealants

Die-Attach Adhesives offer optimized rheology.

Intended for microelectronics and semiconductor industries, Electraset™ electrically conductive die attach adhesives conform to Test Method 5011 in MIL-STD-883. Electraset™ 620 couples low cure shrinkage with low coefficient of thermal expansion, minimizing chip or device warping and preventing cracking or delamination. Electraset™ 620-2 has virtually no bleed and minimal spreading,...

Read More »
Adhesives & Sealants

Silicone Adhesive is flexible and electrically conductive.

With optimized working life and dispensing characteristics, 102-32D is designed for high throughput and automated dispensing processes.Â- Use results in no tailing or stringing and minimal bleeding. Conductivity is 0.0001 Ω-cm, and application methods include spraying, screen-printing, and syringe dispensing. Capable of room temperature and snap cure,...

Read More »
Silver Inks, Adhesives offer reduced-conductivity alternative.
Adhesives & Sealants

Silver Inks, Adhesives offer reduced-conductivity alternative.

Featuring greater than 85% silver content and volume resistance of 0.0005 ohm-cm upon cure, 125-43A/B119-44 solvent-resistant, 2-component electrically conductive ink is intended for touchscreens and shielding applications. Used for making attachments on electrical and mechanical devices, 125-46A/B,C, electrically conductive epoxy adhesive exhibits volume resistivity of less than 0.01 ohm-cm upon...

Read More »
Anisotropic Conductive Adhesives suit LCD manufacturing.
Adhesives & Sealants

Anisotropic Conductive Adhesives suit LCD manufacturing.

Available as paste, film, or pressure-sensitive tape, Anisotropic Conductive Adhesives are conductive in Z-axis and non-conductive in X- and Y-axis. During curing process, particles in adhesive become stacked in vertical configuration, providing conductivity for component that is mounted to surface, while remaining electrically insulating on X and Y axes. Applications include RFID manufacture,...

Read More »
Adhesives for Quartz Oscillators offer low stress, thermal stability.
Adhesives & Sealants

Adhesives for Quartz Oscillators offer low stress, thermal stability.

Electrically conductive and electrically insulating adhesives for quartz oscillator circuits are suited for bonding leads onto quartz crystals and surface mount lid attachment. Electrically condictive products include flexible, medium- and low-viscosity solutions that can be screen printed or machine dispensed. Lid attachment products are optimized for thermal conductivity, thermal cycling, and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers