Magtrol Sa
Buffalo, NY 14224
Software addresses motor testing needs.
Used in conjunction with Magtrol's motor testing dynamometers and controllers, M-TEST v5.0 tests and calculates up to 22 different parameters to determine performance characteristics of motor. In addition to ramp, curve, and manual testing, program also provides pass/fail testing for production line and inspection applications. Test data can be output graphically, displayed in tabular format,...
Read More »
Dynamometer Tables feature casters for smooth mobility.
Offered in 8 models customizable to testing application, Dynamometer Tables accommodate one Hysteresis/Engine or Eddy-Current/Powder Brake Dynamometer. Corrosion-resistant tables incorporate aluminum stand and can be modified to accommodate up to 3 dynamometers. Dual working heights permit testing from standing or sitting position, and standard options include 19 in. rack mounts, locking drawer,...
Read More »
Torque Flange Sensor works in harsh environments.
Insusceptible to signal interference, TF Series has mechanically resistant design with antenna that does not need to be looped around sensor and protective cover that can be mounted close to sensor without affecting signal. Features include direct mounting capability, noise immunity, and optional software and torque transducer displays. Series has torque range of 50-50,000 Nm, accuracy of...
Read More »
Digital Load Conditioner suits strain-gauge sensors.
Dedicated to load measuring applications using load cells or transducers, MVD 100 board can supply one full-bridge sensor and offers 3 adjustable set points. It provides 1-3 V, 0-10 V, or 4-20 mA analog output plus RS-232 serial output. Setup and calibration of conditioner is performed via 3 pushbuttons inside unit, and all configuration values can be recalled on internal LCD display. IP65...
Read More »
Motor Fixture accommodates 6 in. dia. motors.
Adjustable Motor Fixture locates and holds motor in place for running any test, while maintaining center height required for coupling to company's HD-106 through HD-715 Hysteresis Short Base Plate Dynamometer. Lead screw adjustment provides centering for motor while T-Slot Base supplies multiple position options for various motor lengths. Adjustable bridge provides clamping anywhere along axis of...
Read More »
Hysteresis Brakes provide tension control.
Large Bore Brakes consist of pole/case assembly mounted in stationary position within machine, and rotor, which is shaft mounted concentrically within pole/case assembly. Large ID accommodates wire feed directly through brake, while rotor mounted to tape supply reel provides required tension. Brakes offer speed capabilities to 3,000 rpm and intermittent loads up to 2,400 W. Torque is independent...
Read More »
Torque Transducer Display shows torque, speed and power.
Utilizing digital signal processing to display torque, speed, and mechanical power, Model 3400 powers TM, TMHS, and TMB In-Line Torque Transducers. Tare function offsets residuals caused by couplings or suspended loads. Features include vacuum fluorescent display; standard English, metric, and SI torque measurement selections; isolated RS-232 interface; closed-box calibration of torque; built-in...
Read More »
Load Pins feature full temperature compensation.
Based on strain gauge technology, Series LU Load Measuring Pins provide amplified 0-10 V signal output directly from sensor, proportional to load. Integrated electronic board meets EMC/EMI requirements. Ten capacities range from 2.5-1,250 kN with special versions available up to 2,500 kN. Made of high resistance stainless steel, pins are suited for outdoor applications. They provide load...
Read More »
Tandem Dynamometers provide varied torque/speed capabilities.
Tandem Dynamometer Setups, suited for Eddy-Current (WB) and Powder Brake (PB) Dynamometers, are available in various PB/WB combinations: WB connected to WB dynamometer, PB connected to PB dynamometer, and WB connected to PB dynamometer with clutch or coupling. With WB/PB combination, electrical clutch allows PB dynamometer to disconnect once it reaches its speed limit so that test can continue up...
Read More »
Dynamometers are suited for testing electrical motors.
High-Speed WB Dynamometers incorporate optical speed sensor and torque measurement, providing typical accuracy of 0.3%. Units are available with torque ratings from 150 mNÃ-·m to 20 NÃ-·m and speed ranges from 70,000-65,000 rpm, respectively. Company's TM Torque sensor may be mounted in line with dynamometer for system accuracy of 0.1% and speeds up to 50,000 rpm. Dynamometers test...
Read More »
Software addresses motor testing needs.
Used in conjunction with Magtrol's motor testing dynamometers and controllers, M-TEST v5.0 tests and calculates up to 22 different parameters to determine performance characteristics of motor. In addition to ramp, curve, and manual testing, program also provides pass/fail testing for production line and inspection applications. Test data can be output graphically, displayed in tabular format,...
Read More »
Dynamometer Tables feature casters for smooth mobility.
Offered in 8 models customizable to testing application, Dynamometer Tables accommodate one Hysteresis/Engine or Eddy-Current/Powder Brake Dynamometer. Corrosion-resistant tables incorporate aluminum stand and can be modified to accommodate up to 3 dynamometers. Dual working heights permit testing from standing or sitting position, and standard options include 19 in. rack mounts, locking drawer,...
Read More »
Torque Flange Sensor works in harsh environments.
Insusceptible to signal interference, TF Series has mechanically resistant design with antenna that does not need to be looped around sensor and protective cover that can be mounted close to sensor without affecting signal. Features include direct mounting capability, noise immunity, and optional software and torque transducer displays. Series has torque range of 50-50,000 Nm, accuracy of...
Read More »
Digital Load Conditioner suits strain-gauge sensors.
Dedicated to load measuring applications using load cells or transducers, MVD 100 board can supply one full-bridge sensor and offers 3 adjustable set points. It provides 1-3 V, 0-10 V, or 4-20 mA analog output plus RS-232 serial output. Setup and calibration of conditioner is performed via 3 pushbuttons inside unit, and all configuration values can be recalled on internal LCD display. IP65...
Read More »
Motor Fixture accommodates 6 in. dia. motors.
Adjustable Motor Fixture locates and holds motor in place for running any test, while maintaining center height required for coupling to company's HD-106 through HD-715 Hysteresis Short Base Plate Dynamometer. Lead screw adjustment provides centering for motor while T-Slot Base supplies multiple position options for various motor lengths. Adjustable bridge provides clamping anywhere along axis of...
Read More »
Hysteresis Brakes provide tension control.
Large Bore Brakes consist of pole/case assembly mounted in stationary position within machine, and rotor, which is shaft mounted concentrically within pole/case assembly. Large ID accommodates wire feed directly through brake, while rotor mounted to tape supply reel provides required tension. Brakes offer speed capabilities to 3,000 rpm and intermittent loads up to 2,400 W. Torque is independent...
Read More »
Torque Transducer Display shows torque, speed and power.
Utilizing digital signal processing to display torque, speed, and mechanical power, Model 3400 powers TM, TMHS, and TMB In-Line Torque Transducers. Tare function offsets residuals caused by couplings or suspended loads. Features include vacuum fluorescent display; standard English, metric, and SI torque measurement selections; isolated RS-232 interface; closed-box calibration of torque; built-in...
Read More »
Load Pins feature full temperature compensation.
Based on strain gauge technology, Series LU Load Measuring Pins provide amplified 0-10 V signal output directly from sensor, proportional to load. Integrated electronic board meets EMC/EMI requirements. Ten capacities range from 2.5-1,250 kN with special versions available up to 2,500 kN. Made of high resistance stainless steel, pins are suited for outdoor applications. They provide load...
Read More »
Tandem Dynamometers provide varied torque/speed capabilities.
Tandem Dynamometer Setups, suited for Eddy-Current (WB) and Powder Brake (PB) Dynamometers, are available in various PB/WB combinations: WB connected to WB dynamometer, PB connected to PB dynamometer, and WB connected to PB dynamometer with clutch or coupling. With WB/PB combination, electrical clutch allows PB dynamometer to disconnect once it reaches its speed limit so that test can continue up...
Read More »
Dynamometers are suited for testing electrical motors.
High-Speed WB Dynamometers incorporate optical speed sensor and torque measurement, providing typical accuracy of 0.3%. Units are available with torque ratings from 150 mNÃ-·m to 20 NÃ-·m and speed ranges from 70,000-65,000 rpm, respectively. Company's TM Torque sensor may be mounted in line with dynamometer for system accuracy of 0.1% and speeds up to 50,000 rpm. Dynamometers test...
Read More »