Vishay
Malvern, PA 19355
SMT Inductors have saturation currents up to 40 A.
Measuring 0.255 x 0.270 x 0.071 in., devices in IHLP-2525AH-01 series operate over frequencies to 5 MHz and feature saturation current ranges from 8-40 A. Their lead-free, shielded, composite construction resists thermal shock, moisture, mechanical shock, and vibration. At full rated current, inductors feature inductance drop of less than 20%. Typ DCR values range 3.0-76.6 milliohm over standard...
Read More »
Multi-Ganged Potentiometers measure 0.375 x 0.75 in.
Able to be used in multiple-device assemblies with up to 7 modules, Sfernice P9S and P9A are 9 mm ganged potentiometers that utilize CERMET and conductive plastic resistive elements, respectively. Depending on model, max resistance is rated up to 1 or 2.2 Megohm by linear law and 500 Kohm or 1 Megohm by non-linear law. Shaft styles include 3.5 and 6 mm dia round, slotted, flat, and knurled styles...
Read More »
Metal Oxide Resistors offer power ratings from 1-20 W.
Wirewound, auto-insertable Series CA features 2 models with power ratings of 1 and 2 W, resistance range of 0.1 ohm to 1 kohm, and operating temperature of -65Ã-
Read More »PTC Thermistors provide max voltage rating of 240 V.
BCcomponents 2322 673 xxxxx twin vertical SMD PTC devices integrate 2 positive temperature coefficient (PTC) thermistors into one package. They are constructed from ceramic disc, reflow soldered to lead-frame, which results in flat pick-up area of 30 mmÃ-² to facilitate automated assembly. Components are available in variants with max trip times from 1.2-4.0 sec and max current ratings from...
Read More »
Power LED Driver comes in 0.40 x 0.40 in. BGA package.
With 0.11 in. profile, FunctionPAKÃ-® FX4040G7xx features 170 W/in.Ã-³ power density in 9-port package rated for temperatures from -40 to +85Ã-
Read More »
DC/DC Converter delivers 15 W at 2.5 A with 95% efficiency.
FunctionPAKÃ-® FX5545G206 synchronous boost converter is intended for point of load applications in intermediate bus architectures. Multi-chip module provides one layout for all models, power levels, and current levels. Programmable topology enables device to power multiple loads such as power amplifiers, microcontrollers, or baseband logic ICs. Drawing 1 mA of current in shutdown mode, unit...
Read More »
Inductor Series offers DCR values down to 1.5 milliohms.
Featuring 100% lead-free composite construction, IHLM-2525CZ-01 series is supplied in 0.255 x 0.270 x 0.118 in. package. Molded construction allows for protection against electrical shock and is resistant to moisture, salt, and chemicals. Operating over frequency range up to 5 MHz, series is specified for saturation currents from 7-60 A and for typ DCR values up to 102 milliohms. It suits voltage...
Read More »
SCSI Bus Terminators meet SCSI-1 to SPI-4 standards.
Available in 9-, 14-, and 15-line models, multi-mode Series SiP56xx is built on high-voltage, 0.8 micron BiCMOS process. Each output channel provides termination for one SCSI data signal, parity signal, or control signal. Termination provides impedance matching of SCSI bus to minimize signal reflections from end of bus, as well as required SCSI bus biasing for S/E or LVD operation. Units sense...
Read More »
Reflective Optical Sensor operates at distances up to 40 mm.
Surface-mount Model TCND5000 combines IR emitter as source and photodiode as receiver for touch/proximity signal. Optical axes of emitter and detector are parallel-aligned for optimized reflective operation. Emitter features operating wavelength of 950 nm, while 950 nm IR bandbass filter eliminates interference from daylight. Optical barrier between emitter and detector minimizes crosstalk....
Read More »
Clock Oscillators are rated for 1.8 and 2.5 V input voltages.
Measuring 0.275 x 0.197 x 0.63 in., surface-mount Models XOSM-571 and XOSM-572 offer frequency range of 1-100 MHz with frequency stability options of Ã-
Read More »