Vishay
Malvern, PA 19355
Power MOSFETs offer on-resistance down to 1.2 ohms.
Available in SOT-23 and SC-70 packages, 150 and 200 V p-channel power MOSFETs are intended for primary-side active clamp circuits in dc-to-dc converters for telecom, datacom, and industrial products. On-resistance values range from 1.2-2.35 ohms. Suited for same applications, PowerPAK SO-8 devices include 150 V Model Si7439DP with on-resistance of 0.09 milliohms, and 200 V Model Si7431DP rated...
Read More »Inductor offers DCR values down to 0.65 mΩ at 0.19 H.
Housed in .402 x .452 x 0.157 in. package, Model IHLP-4040DZ-05 handles high transient current spikes without saturation and operates over frequency range up to 5 MHz. Saturation current and typical DCR values range from 40-60 A and 1.55-0.65 mΩ, respectively, over inductance range of 0.56-0.19 H. Inductance tolerance is 20%. Rated for operating temperature of -55 to +125Ã-
Read More »LEDs meet industrial application brightness requirements.
Measuring 1.6 x 0.8 x 0.6 mm, TLMx100x AlInGaP-based SMD LEDs are compatible with 0603 chipled footprint and feature 160Ã-
Read More »Thin Film Chip Inductors cover 100-1,700 MHz frequency.
Providing stable inductance in communications devices, IFCB-0402 and IFCB-0603 are offered in respective 0402 and 0603 case sizes that provide Q values up to 49 at frequencies from 100-1,700 MHz. Model IFCB-0402 provides inductance values from 1.0-22 nH, while IFCB-0603 offers values from 1.0-68 nH. With lead (Pb)-free and RoHS-compliant construction, products have max temperature range of -40 to...
Read More »Roll Force Meter uses 4 configurable signal transmitters.
RFS 3 system continuously monitors and displays roll separating and differential balance forces. It also provides local and remote indications of Metal in Mill and Mill Overload. Roll force measurement system utilizes 4 AST 3P signal transmitters and 2 or 4 BLH Type E-4 semiconductor extensometers. Each of 4 AST 3P transmitters can be configured to output via its analog port for 0-10 V, 4-20 mA,...
Read More »Control measures nip force on paper machine winders.
RCS-microPOS digital servo control reeling system is used to adjust primary arms relief cylinders to correct linear nip force on paper machine winders. Utilizing load cells to measure and control force, unit operates cylinders with full control of position, speed, and acceleration. Operation is carried out via digital inputs from PLC or directly from operators console, while force set value is...
Read More »Pressure Transmitter provides shock and vibration immunity.
Incorporating fused ceramic sensors, Series P9420-800 pressure transmitters offer operating range up to 15,000 psi with secondary-containment option of up to 22,500 psi. Combined error due non-linearity, hysteresis, and repeatability is 0.25% FSO, while stability is 0.1% FSO per year. Output is 4-20 mA, 2-wire. Built within male sub-casing, construction is rugged stainless steel with connector...
Read More »Flat Chip Resistor Arrays range from 100-221 ohms.
Integrating 4 thin film resistors into single 0612 surface-mount package, Beyschlag ACAC 0612 precision series features absolute TCR of 25 ppm/K and tracking TCR of 15 ppm/K, while professional series offers absolute TCR of 50 ppm/K with 25 ppm/K available upon request. Absolute tolerance is 0.25% for precision series and 1% for professional series. Arrays are available with 4 equal values, 4...
Read More »Integrated DC/DC Converter offers 570 W/in.-³ density.
Used to adjust and stabilize input power, FunctionPAKÃ-® FX5545G108 DC-to-DC buck converter can also stabilize, filter, reduce ripple, and shift DC voltage levels or stabilize battery voltage outputs. It comes in 20-port, SMT BGA package that measures 0.58 x 0.48 x 0.126 in. and is rated for 4 A max current and 15 W output power with 1 Ã-µA shutdown current. Device converts 2.5-6 V inputs...
Read More »Chip Resistors feature 100 ohm to 221 kohm resistance.
Available in miniature 0402 packages, Beyschlag thin film flat chip resistors feature stable operation in limited-space applications. Operating with film temperatures up to 125Ã-
Read More »