Vishay
Malvern, PA 19355
Chip Resistor Attenuators replace 3 discrete components.
Rated at 0.040 W, Model CZA04S features impedance of 50 Ω, while Model CZA06S is rated at 0.075 W with impedance values of 50, 75, 100, 300, and 600 Ω. Both surface mount units offer attenuation ranges and tolerance values of 1-5 dB at 0.3 dB (L) and 6-20 dB at 0.5 dB (H). They are suited for RF signal attenuation applications in telecom and mobile wireless products. Model CZA04S measures...
Read More »Chip Capacitors measure 0.087 x 0.049 x 0.039 in.
Housed in P case size, Solid Tantalum Series 572D offers capacitance ratings of 10 F at 10 WVdc and 33 F at 6.3 WVdc with tolerances of 10% and 20%. Units feature temperature range of -55 to +85Ã-
Read More »Surface Mount Resistors offer resistance from 0.2-4.0 mΩ.
With respective power ratings of 3.0 and 5.0 W, Models WSL3921 and WSL5931 Power Metal Strip Resistors offer tolerances of 1.0% and 5.0%. Both offer all-welded construction, provide inductance of 0.5-5 nH, and deliver overload capability using PCB as cooling device. WSL3921 measures 0.394 x 0.205 x 0.071 in., and WSL5931 measures 0.591 x 0.305 x 0.068 in. Both feature solid metal nickel-chrome or...
Read More »Transmitter features 10 Vdc analog output.
Operating from -10 to +40Ã-¡Ãâ C at up to 95% RH, AST3IS isolation amplifier is designed for use with strain-gage transducers in hazardous areas without Zener barriers. DIN-rail mount unit has ADC capable of up to 8,300,000 counts. With built-in support for RS-485 and MODBUS RTU, transmitter can communicate with process control host without external hardware or additional software....
Read More »Load Cell Output Converter supports up to 8 transducers.
Featuring Profibus DP communication, DIN-rail mount WST 3 integrates into instrument control panel to provide local weight or force indications. While set-up and calibration are performed via front panel, unit supports 350 Ω transducers with excitation voltage from 8.8-5.5 Vdc. Transmitter converts load-cell output into stable signal for PC- and PLC-based control systems. Included ADC is...
Read More »Phototriacs provide off-line control of AC voltages.
Consisting of GaAs infrared LED that is optically coupled to monolithic photosensitive zero crossing triac detector chip, 1.5 kV/s dV/dt Models VO3062 and VO3063 isolate low-voltage logic from ac voltages up to 380 V. Model VO3063 requires max trigger current of 5 mA to latch output, while Model VO3062 requires 10 mA. Rated with 600 V blocking voltage, phototriacs can provide isolation between dc...
Read More »Inductor offers DCR down to 0.50 mOhm at 0.19 H.
Housed in 0.402 x 0.402 in. package with 0.157 in. profile, Model IHLP-4040DZ-15 handles high transient spikes without saturation and operates over frequency range up to 1 MHz. Saturation current and typical DCR values range up to 44 A and from 0.50-5.20 mΩ, respectively, over inductance range of 0.19-2 H. RoHS-compliant unit operates from -55 to +125Ã-
Read More »Weight Indicator supports up to eight 350 -§Ã™ load cells.
Able to store up to 30 recipes with 34 lines, batch-capable TAD 3 provides accuracy ranging from 1 part in 10,000 to 1 part in 1,000,000 at 1.0 mV/V, depending on selected update rate. Batching is for maximum of 6 ingredients, with coarse and fine-feeding phases supported. TAD 3 supports MODBUS RTU communications via serial port, as well as serial RS232, 422, or 485 with data communication speeds...
Read More »Thin Film Flat Chip Fuses offer current values to 5.0 A.
Featuring stability verified in accordance with UL 248-14 and IEC 60127-4, MFU 0603/0805/1206 provide secondary overcurrent protection for devices in 0.45 or 0.55 mm high packages. Terminations are pure tin on nickel plating. MFU 0603 and 0805 are rated for 0.5-4 A current range and have rated voltage of 32 V, while MFU 1206 has rated current value up to 5.0 A and voltage rating of 63 V. At rated...
Read More »IR Emitter meets UL-268 standard for smoke detectors.
Certified for use in fire-protective signaling systems, lead (Pb)-free TSAL6100X01 has narrow angle of half-intensity of 10Ã-
Read More »