Bosch Rexroth Corp.
Burlington, ON L7M1A8 CAN

New Electromechanical Kit Simplifies Product Selection, Configuration and Commissioning
Designed for pressing and joining processes in the low force range of two to 30 kN. Consists of electromechanical cylinder, power sensor, servomotor, drive controller, industrial PC and browser-based HMI software. Ideal for press-fitting bearings in housings, crimping cables and hoses and inserting, forming processes, bending, embossing and deep drawing in the plastics industry.
Read More »
Programmable Logic Controller integrates I/O.
Integrating IndraControl S20 input/output series, IndraControl XM21/22 PLC is available with Intel-® 600 or 1,300 MHz Atom processor, along with onboard Sercos master featuring cycle time of 250 -µs. Decentralized I/Os, drives, and additional system machinery are connected via Ethernet-based Sercos as universal automation bus for system-wide networking. Suited for factory automation and motion...
Read More »
Mill Type Hydraulic Cylinder provides 2 million load cycles.
Suitable for both 160 and 250 bar pressure ranges, Model CDL2 features 4 different mounting types and stroke lengths up to 3,000 mm. Unit can be used across broad spectrum of applications, including wood and paper production, general machinery construction, recycling, and material handling. Since cylinder is designed for 2 million load cycles, design engineers can accurately calculate...
Read More »
Configuring Complex Multi-Axis Systems with a Few Mouse Clicks New Online Program from Rexroth Facilitates Configuration
The camoSELECT tool provides users with a concrete solution proposal just a few minutes after the application data has been entered. The new camoSELECT tool from Rexroth can provide quick solution proposals with all relevant information concerning price, delivery time, and CAD data for simple to complex multiple-axis systems. This is achieved by focusing on the requirements of the respective...
Read More »
Bosch Rexroth Receives 'MI Earth Day Award'
(Rochester Hills, MI - www.boschrexroth-us.com) Bosch Rexroth, one of the world's leading specialists in drive and control technologies, received an MI Earth Day Award during the MI Earth Day Fest, an annual three-day event held April 22-24 in Rochester, Michigan. The event is Michigan's largest Earth Day gathering, with nearly 100,000 attendees anticipated. The award was created to recognize a...
Read More »
Joystick-Based Remote Control facilitates ship maneuvering.
Marex OS II-3D offers traditional control head as well as remote control that can be extended on request by joystick, which lets captain control entire ship with only one hand. Eliminating need to coordinate drive components individually, 3-axis joystick integrates all propulsion components. Captain can decide at any time whether to use traditional control levers together with lever for bow and...
Read More »
Calculation Software helps configure MGE linear guides.
Linear Motion Designer LF-MGE helps select right guide bearing sizes and optimum motor/gear combination to ensure long service life for Rexroth MGE linear guides. After users enter process data for dynamics, masses, and forces, software automatically calculates service life of individual guide bearings. Program checks selected size and, if necessary, suggests axes with higher load-carrying...
Read More »
Pneumatic Bellow Actuators resist weather/acids/chemicals.
Cylinders in BCS series are equipped with 1.4301 SS passivated plate, and are resistant to corrosion and acids as well as many detergents. Units have working diameters of 150-400 mm and, depending on series, strokes up to 273 mm are possible. Featuring diameters of 150-385 mm and operating temperatures of -20 to +130-
Read More »PC-Based HMI utilizes flash card technology.
Featuring embedded Windows CE OS, IndraControl VEP series is suited for applications such as machine start-up, inputting values, jogging axes, recipe management and supervisory level HMI functions. It has 600 MHz processor with 512 MB of RAM and 1 GB of memory to handle multiple software applications. Available with display sizes ranging from 8.4-15 in., device features USB port on front,...
Read More »Application Story: Custom Pneumatics Help Nidek Medical Oxygen Concentrators Deliver Unmatched Reliability
Custom pneumatic directional control valve provides the perfect solution for the unique demands of a medical oxygen concentrator. Bosch Rexroth (Lexington, KY www.boschrexroth-us.com/BRP) designed, created and produced a custom directional control valve for a new medical oxygen concentrator from medical device specialist Nidek Medical (Birmingham, AL www.nidekmedical.com). This custom-designed,...
Read More »Bosch Rexroth Launches New E-Commerce Website Offering Real-Time Inventory with Fast Delivery Options
BuyRexroth.com provides the easiest access to selected Rexroth hydraulic and factory automation components and features user-friendly search options, purchase by credit card and same-day shipping. Bosch Rexroth has launched a new e-commerce portal designed to provide the easiest access to select authorized Bosch Rexroth products, with the ability for customers to buy products with a credit card...
Read More »Successful Transformation: from Individual Components to Smart Mechatronic Solutions
Bosch Rexroth looks back on 30 years' linear axes development Over the past three decades, Bosch Rexroth’s portfolio of ready-to-install linear axes has been further developed on an ongoing basis. In response to customer requirements, it now focuses on electrification and connectivity. With today’s linear motion technology components in combination with sensors, electronics and software, the...
Read More »Changes to Bosch Rexroth Management in North America
Greg Gumbs is to be appointed as the new President and CEO of Bosch Rexroth North America Paul Cooke retires after 38 years with Bosch Rexroth Paul Cooke, President and CEO of Bosch Rexroth North America, based in Charlotte, NC, USA, will retire on December 31, 2020 after 38 years of distinguished service in various international positions within Bosch Rexroth. His successor as of December 1,...
Read More »Bosch Rexroth Wins The Spotlight on New Technology™ Award from The Offshore Technology Conference (OTC 2020)
Bosch Rexroth won the Spotlight On New Technology™ Award from the Offshore Technology Conference (OTC 2020) for its High Force and Low Voltage Subsea Valve Actuator (SVA). This groundbreaking innovation enables the implementation of the all-subsea factory in green- as well as in brownfields. The award-winning solution was recognized for its environmentally friendly setup, energy efficiency and...
Read More »
New Electromechanical Kit Simplifies Product Selection, Configuration and Commissioning
Designed for pressing and joining processes in the low force range of two to 30 kN. Consists of electromechanical cylinder, power sensor, servomotor, drive controller, industrial PC and browser-based HMI software. Ideal for press-fitting bearings in housings, crimping cables and hoses and inserting, forming processes, bending, embossing and deep drawing in the plastics industry.
Read More »Dr. Heiner Lang appointed to Bosch Rexroth AG Executive Board
Effective August 1, 2019, Dr. Heiner Lang will join the Executive Board of Bosch Rexroth AG, Lohr a. Main, Germany. Once on the board, he will take over responsibility for engineering, which currently lies with Rolf Najork, chairman of the executive board of Bosch Rexroth AG and member of the board of management of Robert Bosch GmbH, responsible for the industrial technology business sector. In...
Read More »
Programmable Logic Controller integrates I/O.
Integrating IndraControl S20 input/output series, IndraControl XM21/22 PLC is available with Intel-® 600 or 1,300 MHz Atom processor, along with onboard Sercos master featuring cycle time of 250 -µs. Decentralized I/Os, drives, and additional system machinery are connected via Ethernet-based Sercos as universal automation bus for system-wide networking. Suited for factory automation and motion...
Read More »
Mill Type Hydraulic Cylinder provides 2 million load cycles.
Suitable for both 160 and 250 bar pressure ranges, Model CDL2 features 4 different mounting types and stroke lengths up to 3,000 mm. Unit can be used across broad spectrum of applications, including wood and paper production, general machinery construction, recycling, and material handling. Since cylinder is designed for 2 million load cycles, design engineers can accurately calculate...
Read More »Bosch Rexroth Back on Course for Growth
Company to achieve double-digit gains for the 2011 fiscal year * Core team retained despite crisis * Capacities increased in Asia * Competitive advantages thanks to global network Lohr/Frankfurt/Hoffman Estates. Bosch Rexroth returned to a growth course in 2010 and will make considerable gains again this year. The supplier for machinery construction, mobile machines, and renewable energies...
Read More »Rexroth Automation Technologies for Food and Packaging Industries Highlighted in New Brochure Series
Brochures show how combining Rexroth automation technology increases productivity and energy efficiency while lowering cost of ownership in confectionary, dry food, beverage and liquid food applications. (Hoffman Estates, IL - www.boschrexroth-us.com) A new set of full-color brochures from Bosch Rexroth gives an overview of the company's automation technology for the food processing, beverage and...
Read More »