Saelig Company Inc
Fairport, NY 14450
Transceiver Modules use software to boost data transmission.
Wireless easy-Radio modules utilize V2 firmware, which provides features such as brown-out settings recovery, and all radio communications and data I/O software is embedded in fully compliant module. Along with user-selectable frequency, data-rate, and power output, modules offer Ã-
Read More »
Temperature/RH Data Logger offers USB connectivity.
Able to record transit conditions, EL-USB-2 measures and stores up to 16,382 RH and 16,382 temperature readings over 0-100% RH and -31 to +176Ã-
Read More »
USB Adapter turns PC into 2 MHz oscilloscope.
Powered via its USB 2.0 interface, PicoScope 2202(TM) PC scope adapter features plug-and-play operation for any laptop or desktop PC running Microsoft Windows 98SE or above. Dual channel, USB oscilloscope has 20 MS/s, 8-bit sampling rate; 2 MHz bandwidth; ranges from -±50 mV to -±20 V; and 32 kB buffer memory. Supplied with PicoScope and PicoLog DAQ software, users get simultaneous...
Read More »
USB-Powered Devices replace missing PC serial ports.
Based on Model FT232BM USB UART IC, Series USB-COM-M allows RS232 serial devices to communicate with USB PCs that have no serial ports. Housed in mountable metal enclosures, units add one RS232 Windows serial COM port without adding card-slot or external power supply, and support data transfer rates up to 1 million bps. Devices include full set of data and control signals on DB9M connectors,...
Read More »
Digital I/O Board gives I/O control from Ethernet.
Featuring three 8-bit TTL ports, EtherI/O24(TM) enables 24 lines to be independently programmed as input or output. Unit connects by RJ-45 connector to any Ethernet network supporting TCP/IP, and output pins source or sink up to 30 mA to allow for direct connection to variety of devices. On-board 50 MIPS flash micro-controller can be reprogrammed to suit application, while integrated switch-mode...
Read More »
Motor Controller drives unipolar stepper motors.
Easy-Step(TM) 3000 motor drive and control system drives unipolar stepper motors in full 2-phase, full 1-phase, and half-step modes up to 35 V and 3 A/phase. Direct command set, slave/remote pulse mode, voltage mode, and teach mode operations are all supported. Measuring 63.6 x 26.4 mm, drive also features store and replay; selectable pull-in rate and maximum step rate; and adjustable ramp time...
Read More »
Motherboard features revision control.
With minimum lifecycle of 5 years, Industrial ATX Motherboard, Model G4H875-N is based on Pentium 4/Celeron processor up to 3 GHz with 533/800 MHz FSB and 2 DDR SDRAM sockets. It includes 4 PCI expansion slots, 1 PCI-X, and AGP 8x/4x plus 4 USB 2.0 and 2 RJ45 LAN ports. Two Intel 82547EI Gigabit LAN supports 10/100/1000 Mbps data transmission and Intel 82551QM 10/100BaseTx Fast Ethernet.
Read More »
USB-Powered Devices provide serial ports for laptops.
USB-COM-S series allows RS232 serial devices to talk to USB-enabled PCs. Based on FTDI's single chip FT232BM USB UART IC, products add 1, 2, 4, or 8 RS232 Windows Serial COM ports without requiring card-slots or external power supplies. Supporting data transfer rates to 1 million bps, they feature full set of data and control signals on DB9M connectors, with internal 128-byte transmit buffer FIFO...
Read More »
Software helps design front panels.
FrontDesigner enables engineers to design professional-looking front panels for small production run devices. It includes drawing functions for rectangles, polygons, ellipses, labels, and drillings. Rounded and interpolated contours are possible as well as chamfers. Specialized functions allow rotation, stretching, mirroring, drilling, and milling. HPGL export function creates PLT files so user...
Read More »
Software aids in design of front panels.
Equipped with symbol library and scale-assistant, FrontDesigner(TM) aids in design of front panels for home made or small production run devices. It provides drawing functions for rectangles, polygons, ellipses, labels, and drillings, and all objects can be grouped into complex symbols. Specialized functions handle rotation, stretching, mirroring, drilling, and milling. HPGL export function...
Read More »