Turck, Inc.
Plymouth, MN 55441
I/O System works in hazardous environments.
Intrinsically safe excomÃ-® modular remote I/O system can be installed into Class I, Zone 1, or Class I, Div 2 hazardous locations, eliminating need for conventional intrinsic safety barriers, and simplifying wiring and termination. Systems are available with 16, 8, or 4 I/O modules, fieldbus outputs, and optional HART outputs. Field devices are connected via four 4-pole connectors per...
Read More »
Junction Boxes maintain, identify, and consolidate wiring.
Top Mount multiboxÃ-® 4 and 8 port junction boxes use industry standard M12 connector for device wiring and M23 connector for quick disconnect homerun cable. Homerun connector options include 12 or 19 pin right angle or straight molded cordsets. Operating current is 4 A/port, 8 A total for the quick disconnect homerun cable style, and 9 A total for molded homerun cable styles. Operating...
Read More »
Miniature Junction Boxes offer installation flexibility.
Miniature eurofastÃ-® M12 molded junction boxes are available in 4 pin single or 5 pin dual outputs per port with optional power and signal LEDs. Four pin model uses M12 thread size homerun connection for power to box and 5 pin model uses M16 thread size connection. Both models offer integral cable as option. Homerun connectors are available in straight or right angle styles with high-flex...
Read More »
Sensor offers rugged front-face material.
WeldGuard Sensor is available in AC/DC ferrite core with WFI, DC U-proxÃ-®, and extended ferrite core with 2- and 3-wire DC. Front face material lasts 13 times longer than standard sensor face materials. Barrel is either stainless steel or TeflonÃ-® coated. Sensor comes in 8, 12, 18, and 30 mm barrel sizes and cube style CA40 (40 mm cube). It is suitable for resistance welding in...
Read More »
Cordsets operate in washdown environments.
microfast(R) cordsets with 1/2-20UNF nylon coupling nuts offer chemical resistance when used in applications with petroleum products such as naphthalene, xylene, cutting fluids, hydraulic fluids, and gear oils. Nylon coupling nuts provide weather resistant connection that is chemically resistant to compounds including ammonium chloride, benzene, ethers, and alcohol. Cordsets have NEMA 1, 3, 4, 6,...
Read More »
Junction Box offers homerun field wiring flexibility.
Terminal Chamber multibox(R) uses one M12 connector to attach to device, and offers either screw terminals or cage clamps. It is available with 4 or 8 ports, dual output per port, and either die-cast zinc with EMC cable gland or industrial hardened plastic (PBT) with jumper option. Minimum current rating is 10 A, with maximum of 12 A for 4-port and 16 A for 8-port versions. Both versions offer 3...
Read More »
Valve Position Sensors suit chemical handling and processing.
DSU35 sensors fit valve stem heights of 20, 30 and 50 mm with outer mounting hole dimensions of 80 and 130 mm. DC, AC/DC and NAMUR sensors have several output options. AS-i version is compatible with Actuator Sensor Interface protocol, and provides direct valve control, eliminating need for separate source. Terminal chamber version is designed for chemical process applications where conduit must...
Read More »
Plug converts sensors into controllers.
SmartPlug adds control functions such as timing, counting, inverting and speed monitoring to sensors. Approximately 2 in. long, it connects between cable and sensor. Programming is done via teach input device available separately. Inverter version converts PNP input signal to NPN or vice versa, or NO to NC. Timer is programmable from 1 ms to 65 sec. Counter is programmable to count pulses or...
Read More »
M12 Field-Wired Connector allows tool-less installation.
Insulation Avoidance Connector (IAC) has pin-shaped contact that is forced into end of conductor. Pin makes contact with stranded wires of conductor, without removing insulation. Connections are rated for 4 Amps of current. Elastic material of insert ensures proper connection and provides gas-tight and vibration-resistant connector. 4- and 5-pin versions are available, for use with 20 to 26 AWG...
Read More »
In-line Flow Sensors are used for liquids and gases.
D04 and D10 self-contained flow sensors monitor changes in flow as low as 5 ml/min (0.001 gpm). They connect directly into pipeline and maintain accuracy during changes in media temperature. Sensors are available with discrete transistor output or 4-20 mA analog signal output, both in DC only. Each can be set up for various applications using adjustment potentiometer on front of housing. All...
Read More »