Turck, Inc.

UL Certified Class I, Division 2 Interface Modules from TURCK for Hazardous Areas
Controls & Controllers

UL Certified Class I, Division 2 Interface Modules from TURCK for Hazardous Areas

Minneapolis, Minn.-February 25, 2010- TURCK announces that its IMS interface modules-featuring one of the most low-profile designs in the industry-are now UL certified for Class I, Division 2, Groups A, B, C and D hazardous locations. The 6.2 mm wide IMS modules provide complete galvanic isolation, resisting electrical interference and noise in busy plant environments, with signal conditioning...

Read More »
Quick-Disconnect Receptacle serves as secondary conduit seal.
Construction Equipment and Supplies

Quick-Disconnect Receptacle serves as secondary conduit seal.

Explosion-proof, feed-through receptacle Model 7/8-16UN minifast® is rated for 600 V and 9 A, withstands pressure of 2,000 psi, and installs into Â-½-14 NPT threaded conduit entries. Fully potted 316 stainless steel housing offers IP67 protection when mating connector is attached. When used as secondary conduit seal, CSA certified product prevents gas migration and has 30 V and 600 mA...

Read More »
Absolute Encoders support CANopen® and SAE J1939 protocols.
Communication Systems & Equipment

Absolute Encoders support CANopen® and SAE J1939 protocols.

Designed for extreme outdoor applications, Sendix M3658 shaft and M3678 hollow shaft encoders feature Sensor Protect(TM) technology, which incorporates fully encapsulated electronics and separate mechanical bearing assembly, providing IP69K rating for housing and flange. Interlocking bearing design utilizes Safety-Lockplus(TM) technology that mechanically protects shaft seal. With resolution up...

Read More »
Position Sensor mounts single-handedly in C-groove cylinders.
Sensors, Monitors & Transducers

Position Sensor mounts single-handedly in C-groove cylinders.

Measuring 2.9 x 4.6 x 18 mm, BIM-UNR magnetic position sensor mounts within C-groove cylinders with no accessories required. It incorporates 1.5 mm hexagon mounting screw to securely mount sensor, and screw is located near cable exit to ensure sensor remains fastened even if cable is pulled. Active sensing element is located at bottom of groove to provide reliable detection on short-stroke...

Read More »
Bihl+Wiedemann GEN. 2 AS-I Safety Gateway Monitors Two Safety at Work Networks at Once
Agricultural & Farming Products

Bihl+Wiedemann GEN. 2 AS-I Safety Gateway Monitors Two Safety at Work Networks at Once

Minneapolis, Minn.-- TURCK announces new Gen. 2 AS-interface® (AS-i) safety gateways manufactured by Bihl+Wiedemann and distributed by TURCK in the United States. The new gateways integrate AS-i safety monitors and slaves, allowing two Safety at Work networks and up to 16 release circuits to be monitored through each gateway. Now, two independent AS-i networks can be powered by a single...

Read More »
Redundant Backplane suits FOUNDATION Fieldbus H1 Segments.
Electronic Components & Devices

Redundant Backplane suits FOUNDATION Fieldbus H1 Segments.

Diagnostic Power Conditioner (DPC) system has been expanded with Single Segment Redundant Backplane, which can combine 2 isolated power supply modules into one FOUNDATION(TM) fieldbus segment. Backplane integrates diagnostic unit used to monitor redundancy of external bulk power supply along with H1 power supply. Measuring 210 x 42 x 113 mm, backplane footprint is designed for DIN rail mounting,...

Read More »
TURCK'S BL Compact Family Collects Analog and Digital Signals at the Source
Communication Systems & Equipment

TURCK'S BL Compact Family Collects Analog and Digital Signals at the Source

Minneapolis, Minn. - November 24, 2009 - TURCK's BL Compact system is a revolutionary modular I/O solution for collecting a variety of signals in a single, rugged node on a network. Rather than routing all signals through a control cabinet, this device makes it possible to obtain analog, digital, thermocouple, RTD, serial, RFID or a mixture of signal types in a compact, on-the-machine device over...

Read More »
TURCK Q08 Proximity Sensors Feature Extended Sensing Range for all Metal Types
Sensors, Monitors & Transducers

TURCK Q08 Proximity Sensors Feature Extended Sensing Range for all Metal Types

Minneapolis, Minn. - July 23, 2009 - TURCK announces that the company's rugged Q08 uprox®+ (http://www.turck-usa.com/Products/Sensors/Inductive/Factor_1_Sensors/uprox_plus/index.htm) factor 1 sensor-designed to detect steel, stainless steel, copper, brass and aluminum at the same rated sensing distance-now offers an extended range of 8 mm. With no reduction factor, uprox+ factor 1 sensors...

Read More »
Target Pucks for Turck DSU35 Valve Sensors Simplify Sensor Adjustments
Sensors, Monitors & Transducers

Target Pucks for Turck DSU35 Valve Sensors Simplify Sensor Adjustments

Minneapolis, Minn.-June 8, 2009-TURCK announces new target pucks for its DSU35 valve sensor series, which feature large targets to expedite and simplify sensing adjustments-ensuring highly accurate valve position data. DSU35 sensors monitor valve position via pneumatic rotary actuators, and then provide electronic feedback indicating an open or closed position. A fully adjustable target puck is...

Read More »
Sensor detects small targets on automotive skids.
Sensors, Monitors & Transducers

Sensor detects small targets on automotive skids.

IP68 rated, 80 mm rectangular Ni75U-Q80 uprox®+ sensor features EMC immunity, suited for automotive manufacturing environments. It offers switching distances up to 75 mm and flexible mounting options. Facilitating single-sided mounting on rear metal wall, sensor can also be fully embedded, delivering 40 mm switching distance when surrounded by metal on all 4 sides.

Read More »

All Topics