Turck, Inc.

Sensors, Monitors & Transducers

Pressure Sensors withstand hazardous locations.

Isolated from media, stainless steel PT4300 is UL/cUL 1604 (CSA 213) Class I, Div 2, Groups A, B, C and D-approved for hazardous area applications. Construction without o-rings or welds allows pressure ranges up to 10,000 psi with burst pressure up to 20,000 psi. Areas of use include oil and gas, refrigeration, gas compression, test stands, and industrial OEM applications.

Read More »
Communication Systems & Equipment

Single-Turn Absolute Encoders survive harsh environments.

Supplied in die-cast housings with 12-bit analog and 14-bit CANopen outputs, Sendix® magnetic encoders feature IP 69k protection rating, are resistant to humidity and condensation, and are suitable for outdoor use. Non-contact devices have 36 mm dia and use Sensor-Protect(TM) technology, where electronics are fully encapsulated and mechanical assembly is separated for shock resistance in...

Read More »
Communication Systems & Equipment

Junction Bricks connect multiple devices on fieldbus trunk.

Vertical mount JRBS junction bricks for FOUNDATION fieldbus(TM) are available with 4, 6, 8, 10, or 12 ports and feature removable terminals located on both sides of brick. Units provide short circuit protection for all ports, as well as visual status with bright LED indicators located on each spur. DIN-mounted vertically or horizontally, they are also available with optional overmolded, pluggable...

Read More »
Sensors, Monitors & Transducers

Metal Sensor is offered in IP 69k rated washdown version.

With temperature rating from -40 to 100°C, uprox®+ Factor 1 sensors are resilient to high-pressure cleaning agents found in food and beverage and pharmaceutical industries. They incorporate 316 stainless steel construction and liquid crystal polymer front cap that resists moisture ingress. Units feature polypropylene cable jacket that stands up to harsh chemicals, and long sensing...

Read More »
Absolute Encoders resist shock and vibration.
Communication Systems & Equipment

Absolute Encoders resist shock and vibration.

With 12-bit analog and 14-bit CANopen outputs, Sendix® encoders use Sensor-Protect(TM) technology to deliver fully encapsulated electronics and separated mechanical assembly, providing high resistance to shock (rated to 500 G) and vibration (rated to 30 G). Featuring die-cast housings, IP 69k rated single-turn magnetic absolute encoders are also resistant to humidity and condensation....

Read More »
Ethernet Gateway is designed for PROFINET systems.
Communication Systems & Equipment

Ethernet Gateway is designed for PROFINET systems.

BL67 Ethernet gateway, available for DeviceNet(TM), PROFIBUS®-DP, CANopen, Ethernet/IP(TM), and Modbus TCP/IP, consists of gateway, base modules, and electronic modules. I/O modules are configured independently of fieldbus protocol, and up to 32 modules may be connected to gateway, delivering up to 512 digital I/O points or 128 analog channels on single system. IP67-rated for field...

Read More »
Position Sensor requires one connector for two cylinders.
Sensors, Monitors & Transducers

Position Sensor requires one connector for two cylinders.

Twin-set sensor is comprised of 2 BIM-UNT sensing heads connected by overmolded cable; power and signal wires are then combined into integral M12 connector on sensor. BIM-UNT sensors measure 28 mm and active sensing faces are located at end of sensor to detect piston rod end position. Accessories range from precision mounting to wire-strain relief products allowing for installation of sensors in...

Read More »
Safety Monitors control power availability for machines.
Communication Systems & Equipment

Safety Monitors control power availability for machines.

Intended for emergency stop systems, AS-Interface Safety Monitors include GUI for commissioning and field diagnosis of safety system, as well as capability to link multiple Safety at Work circuits together, allowing complex safety systems to be handled via AS-i. Configuration information is stored on removable memory card, enabling transfer to new unit. Monitors are available as stand-alone units...

Read More »
Software

Free I/Oassistant V3.0 Configuration Software from Turck

Minneapolis, Minn. - TURCK has launched the latest version of its popular I/Oassistant software, V3.0. "We are proud to announce that our new I/Oassistant V3.0 package is now available for download completely free of charge at www.turck-usa.com," says Nick Clute, product specialist with TURCK's network and interface division. I/Oassistant is used as a configuration tool when designing TURCK's...

Read More »
Pressure Sensor provides switch point detection.
Sensors, Monitors & Transducers

Pressure Sensor provides switch point detection.

PK pressure sensors provide pneumatic pressure ranges of -29.5 to 0 in. Hg and 0 to 145 psi, with 3 percent accuracy, and are available in two body styles, pico and nano, to support various mounting options. Programmed through push buttons, sensor menu may be inverted for programming flexibility. Features include 2 PNP switch points and integrated M8 connector. Compact sensors are IP 65 rated and...

Read More »

All Topics