JR Power Tool Co.
Chicago, IL 60646
Share:
Hammer Drill provides 0-32,000 bpm.
Model 12524-03 24-volt Cordless In-Line Hammer Drill features dual mode selector with drill-only and hammer drill, and 2-speed selector with high torque and high speed from 0-750 rpm and 0-2,000 rpm, respectively. It includes adjustable auxiliary handle with depth gauge. For drilling horizontally into masonry, cinder block or brick, in-line design allows user to apply max force on drill bit. For...
Read More »
Rotary Saw cuts drywall and solid surface materials.
With 5 A motor, 2 speed settings, and adjustable base/depth guide, model 1639 cuts ceramic wall tile, cement board, particle board, plaster, lath, foam board, and composites. Bump-off switch allows for 1-handed operation with speeds of 25,000 and 30,000 rpm. Glass-filled nylon foot plate/depth guide adjusts in seconds and will not break or deform under pressure. Unit comes with 1/8 and 1/4 in....
Read More »
Cordless Drill/Drivers survive multiple one story drop tests.
Brute-Tough(TM) drill/drivers are designed with Ã-½ in. chuck for continuous heavy use in high torque drilling applications. Models offer 1,500 rpm (14.4 V) and 1,300 rpm (18 V) in addition to 475 lb-in. torque. Compact-Tough(TM) drill/drivers, designed for tight spaces, feature 3/8 in. chuck and come in 9.6, 12, and 14.4 V models with speeds up to 1,200 rpm (12 and 14.4 V). All drill/drivers...
Read More »Cordless Planers come in 18 and 14.4 volt models.
Models 53518 (18 V) and 53514 (14.4 V) are 3 1/4 cordless planers. Each features 2 reversible Woodrazor(TM) micrograin carbide blades, which resist fractures from accidental nail or staple strikes. Electronically-balanced single blade cutting head holds Woodrazor blade at optimal angle. Both models have 2-way chip ejection switch to direct shavings either left or right and ambidextrous lock off...
Read More »Cordless Jig Saws offer tool-free blade change.
Models 52324 (24 V), 52318 (18 V), and 52314 (14.4 V) can cut up to 2 3/4 in. in wood or 5/16 in. in steel. Motor provides 2,000 strokes/min, while magnesium gear housing adds durability. Accepting T-Shank blades, 3-way grip eliminates blade slippage or pullout and helps prevent breakage. Die-cast aluminum foot bevels to 45Ã-
Read More »Hammers are offered in combination and demolition models.
Models 11241EVS SDS-max and 11248EVS Spline are 1 9/16 in. units powered by 11 A motors. They provide 1,700 to 3,300 bpm operating at 0-170 to 340 rpm. Models 11240 SDS-max and 11247 Spline are 1 9/16 in. units powered by 10 A motors that provide 5.2 ft-lbs of impact energy, 400 rpm, and 3000 bpm. Combination Dual Mode Selector converts each unit from rotary hammer to hammer only. Models 11388...
Read More »Surfacing Grinder features comprehensive dust removal system.
Model 1773AK 5 in. Concrete Surfacing Grinder features 10 A motor operating at 11,000 rpm, diamond cup wheels, and brush-ring for dust-free work. Epoxy coated field windings, double sealed ball bearings and 2 lip-sealing protective rings protect against dust contamination. Built-in dust chute connects to vacuum hose for efficient debris removal. Wrap-around side handle for easy handling and...
Read More »
Hammer Drills have high torque.
Cordless models 3870-04 18 V and 3670-04 14.4 V have 450 and 425 in.-lb of torque, respectively. Their 17-position clutches allow user to control torque level for specific applications and to select drill or hammer mode. Each tool has two-speed gear train, which provides 450 or 1500 rpm and creates powerful hammer action, delivering 0 to 5,000 and 0 to 17,500 BPM. By changing bit, they provide...
Read More »
Hammer Drill provides 0-32,000 bpm.
Model 12524-03 24-volt Cordless In-Line Hammer Drill features dual mode selector with drill-only and hammer drill, and 2-speed selector with high torque and high speed from 0-750 rpm and 0-2,000 rpm, respectively. It includes adjustable auxiliary handle with depth gauge. For drilling horizontally into masonry, cinder block or brick, in-line design allows user to apply max force on drill bit. For...
Read More »
Rotary Saw cuts drywall and solid surface materials.
With 5 A motor, 2 speed settings, and adjustable base/depth guide, model 1639 cuts ceramic wall tile, cement board, particle board, plaster, lath, foam board, and composites. Bump-off switch allows for 1-handed operation with speeds of 25,000 and 30,000 rpm. Glass-filled nylon foot plate/depth guide adjusts in seconds and will not break or deform under pressure. Unit comes with 1/8 and 1/4 in....
Read More »
Cordless Drill/Drivers survive multiple one story drop tests.
Brute-Tough(TM) drill/drivers are designed with Ã-½ in. chuck for continuous heavy use in high torque drilling applications. Models offer 1,500 rpm (14.4 V) and 1,300 rpm (18 V) in addition to 475 lb-in. torque. Compact-Tough(TM) drill/drivers, designed for tight spaces, feature 3/8 in. chuck and come in 9.6, 12, and 14.4 V models with speeds up to 1,200 rpm (12 and 14.4 V). All drill/drivers...
Read More »Cordless Planers come in 18 and 14.4 volt models.
Models 53518 (18 V) and 53514 (14.4 V) are 3 1/4 cordless planers. Each features 2 reversible Woodrazor(TM) micrograin carbide blades, which resist fractures from accidental nail or staple strikes. Electronically-balanced single blade cutting head holds Woodrazor blade at optimal angle. Both models have 2-way chip ejection switch to direct shavings either left or right and ambidextrous lock off...
Read More »Cordless Jig Saws offer tool-free blade change.
Models 52324 (24 V), 52318 (18 V), and 52314 (14.4 V) can cut up to 2 3/4 in. in wood or 5/16 in. in steel. Motor provides 2,000 strokes/min, while magnesium gear housing adds durability. Accepting T-Shank blades, 3-way grip eliminates blade slippage or pullout and helps prevent breakage. Die-cast aluminum foot bevels to 45Ã-
Read More »Hammers are offered in combination and demolition models.
Models 11241EVS SDS-max and 11248EVS Spline are 1 9/16 in. units powered by 11 A motors. They provide 1,700 to 3,300 bpm operating at 0-170 to 340 rpm. Models 11240 SDS-max and 11247 Spline are 1 9/16 in. units powered by 10 A motors that provide 5.2 ft-lbs of impact energy, 400 rpm, and 3000 bpm. Combination Dual Mode Selector converts each unit from rotary hammer to hammer only. Models 11388...
Read More »Surfacing Grinder features comprehensive dust removal system.
Model 1773AK 5 in. Concrete Surfacing Grinder features 10 A motor operating at 11,000 rpm, diamond cup wheels, and brush-ring for dust-free work. Epoxy coated field windings, double sealed ball bearings and 2 lip-sealing protective rings protect against dust contamination. Built-in dust chute connects to vacuum hose for efficient debris removal. Wrap-around side handle for easy handling and...
Read More »
Hammer Drills have high torque.
Cordless models 3870-04 18 V and 3670-04 14.4 V have 450 and 425 in.-lb of torque, respectively. Their 17-position clutches allow user to control torque level for specific applications and to select drill or hammer mode. Each tool has two-speed gear train, which provides 450 or 1500 rpm and creates powerful hammer action, delivering 0 to 5,000 and 0 to 17,500 BPM. By changing bit, they provide...
Read More »