Mazak Corporation
Florence, KY 41042
Share:
Vertical Machining Center has chip-to-chip time of 2.9 sec.
Driven by 25-hp spindle motor, Nexus 410A reaches max spindle speed of 12,000 rpm. Vertical Machining Center provides high-speed, rapid traverse rate of 1,417 ipm @ 0.5 G acceleration. Unit also provides machining area with X, Y, and Z-axis travels of 22, 16, and 20 in., respectively. Table size is 35.4 x 16.1 in., with load capacity of 1,100 lbs. Tool magazine can store up to 30 tools (of 40...
Read More »Machining Center provides multi-tasking.
Integrex e-410H can turn solid block of material into completed part. It features electronic communication tools for integrated production management functions. Machine provides 1,969 ipm rapid traverse rate, and X and Y axis stroke of 29.13 and Ã-
Read More »Machine Tool performs multiple machining processes.
Multi-Tasking Integrex e-650H performs turning, milling, drilling, deep-hole boring, and gear hobbing. It has B, C, X, Y, and Z axes, Mazatrol Fusion 640M Pro CNC system, and E-mail communication via cell phone between machine and off-site personnel. The e-Tower function and electronic communication tools provide scheduling and production status plus verbal messaging and blind-spot monitoring...
Read More »Machining Center offers accuracy better than ISO 10791-4.
u-4800 HMC features 40 hp spindle able to accelerate from 0 to 15,000 rpm in 1.9 sec. Rapid traverse rates and max feed rate are 2,362 ipm with 1 G acceleration. Automatic Tool Changer produces 2.5 sec chip-to-chip tool change time. Two-pallet changer machine has 15.7 in. square pallet and pallet change time of 5 sec. X, Y, Z axis strokes are 22, 24.8, and 23.6 in. respectively.
Read More »Turning and Milling Machine works on big parts.
Integrex e-1060V combines vertical spindle with turntable for large parts such as jet engine cases and housings, pump housings, and valves. It has 50 hp turning table that accepts 31.5 in. pallet holding parts up to 59 in. dia and 56.9 in. high. Operating at 600 rpm, table has 0.0001Ã-
Read More »Communication System sends messages, shows pictures.
e-Tower multimedia communication device provides production scheduling and real-time machine status plus visual images through installed cameras. From PC, machine operation and job status can be monitored in real time, individual machine production scheduling data can be downloaded via factory network, and schedules can be modified. Every alarm switch on machine issues verbal and written warning...
Read More »Vertical Machining Center has 0.9 second tool change time.
Variaxis 630 offers rotary table with tilting angle of 150Ã-
Read More »Machining Center integrates multiple processes in one setup.
Variaxis 500 offers rotary table with A-axis tilting angle from -120Ã-
Read More »Machining Performer completes workpieces in 2 operations.
Integrex e-1060V combines vertical spindle with 50 hp turning table which accepts 31.5 in. dia or 31.5 in. square pallets. Its 600 rpm table has 0.0001 deg indexing increment. Maximum part machining diameter is 47.2 in., and maximum swing is 59 in. Its 10,000 rpm milling spindle provides 339 lb-ft of torque, and B-axis movement has 150 deg angular displacement. X, Y, and Z Axis strokes are 60,...
Read More »Horizontal Machining Center suits high volume production.
F3-660L offers spindle speeds from 0 to 20,000 rpm in 1.55 sec, 3.2G acceleration/deceleration rates, 90 deg table indexing at 0.8 sec, and chip-to-chip time of 2.4 sec. Rapid traverse rate for X, Y, and Z axis is 4720 ipm. Strokes for X and Y axes are 26 in.; Z axis stroke is 20 in. Tool magazine stores 40 tools with No. 40 taper. Tool life management software, 2-pallet changer, flood and base...
Read More »