Hirschmann Engineering USA, Inc.

Corrosion Inhibitors prevents rust in wire EDM machines.
Packaging Products & Equipment

Corrosion Inhibitors prevents rust in wire EDM machines.

Added to de-ionized water between dirty water tank and clean water tank, H2O Plus prevents build-up of rust on workpieces and non-stainless work holders. Non-ionic product is efficient when used at concentration ratio of 1:100. Used at concentration ratio of 0.5:100, H2O Plus Blue prevents rust build-up and keeps machinery clean by loosening dirt and waste products from tank walls and hoses. Both...

Read More »
Vertical Vise is used with wire EDM machine.
Portable Tools

Vertical Vise is used with wire EDM machine.

Incorporating 2 clamping jaws that require only turning of central screw for tightening, H4538 vise provides positive clamping of 1 or 2 independent workpieces in same set-up. Workpiece height ranges are 2.36-3.74 in. and 3.15-4.53 in., with latter height achieved by relocating clamping jaws at higher level. Jaws can be inverted to provide clamping range of 0.79-2.36 in., and removable side stops...

Read More »
Synthetic Grinding Fluid offers low foam and mist.
Electrical Equipment & Systems

Synthetic Grinding Fluid offers low foam and mist.

SintoGrind TTS is formulated from synthetically produced poly-alpha-olefin based fluid, which provides unlimited life span if properly filtered. Lubricity lends to extended wheel life and minimal heat build-up in workpiece as well as production quality of surface finishes and elimination of surface cracks. Product has no hazardous elements and exhibits stable viscosity at different temperatures.

Read More »
Disc Holder mounts to quick-change pallet system.
Architectural & Civil Engineering Products

Disc Holder mounts to quick-change pallet system.

Intended for use with Fixturing System 4000, Model HE4232 provides positive clamping of polycrystalline diamond CBN discs, assuring that discs will be held flat and well into cutting zone of wire EDM. Two clearance holes on 50 mm centers allow permanent mounting directly to machine table. Holder accommodates 2.35 in. diameter discs up to .2 in. thick. Distance from bottom of disc to machine table...

Read More »
Wire EDMs offer 5th axis.

Wire EDMs offer 5th axis.

Model H80R.NC integrated A-axis, for horizontal use on wire EDMs, uses Fanuc encoder which measures 1 million pulses per revolution. Encoder is mounted directly to axis spindle to ensure optimal accuracy. Axis housing is made from single block of corrosion-resistant stainless steel and precision ground to axis.

Read More »
Vertical Vise facilitates wire EDM.
Portable Tools

Vertical Vise facilitates wire EDM.

Model H4537, for Fixturing System 4000, provides positive clamping of one or 2 independent workpieces in same set-up. Vise incorporates 2 separate clamping jaws that require only the turning of a central screw for tightening. No supporting spacers or jackscrews are needed. Clamping jaws, with workpiece-height ranges of 0-.826 in. and .826-1.615 in., minimize obstruction above top of workpiece....

Read More »
Modular System provides zero point fixturing.
Architectural & Civil Engineering Products

Modular System provides zero point fixturing.

Modular System 9000 allows for quick and accurate changing of pallets, workpieces, fixtures, and vices. It offers positioning and repeatability to within .00039 in. Clamper Models 9001 and 9003 are normally in closed position and are opened via air or hydraulic pressure. Axial loads of 2,200 lb are standard, with up to 6,750 lb of clamping force. System 9000 is suited for HMCs, VMCs, grinding...

Read More »
Rotary Indexing Tables suit wire and die sinking EDM machines.
Communication Systems & Equipment

Rotary Indexing Tables suit wire and die sinking EDM machines.

Jauch and Schmider rotary indexing tables and A/B axes can be integrated on wire and die sinking EDM machines as well as CNC machining centers. Equipment includes face place or taper type part mounting. Optional clamping devices include proprietary, 3R, and Erowa clampers; accessories include collect chuck. Axes are equipped with direct or indirect measurement systems, and rotary indexing table...

Read More »
Tool Holders are compatible with Erowa and 3R.
Architectural & Civil Engineering Products

Tool Holders are compatible with Erowa and 3R.

Minifix P-Holders allow variety of ways for small to medium sized electrodes to be held accurately. Four X, Y, and Z references allow 90° indexing of electrodes. Rock Solid Referencing allows ±.0001 in. on/off accuracy. P-Holders are offered in 2.3 and 5.3 in. lengths for each tooling system. Pre-formed copper blanks attach directly to Minifix holders and are offered in variety of sizes,...

Read More »
Multifunction Fluid suits grinding/ersosion applications.

Multifunction Fluid suits grinding/ersosion applications.

IONOGRIND combines advantages of dielectric fluid used for metal removal and good surface quality, along with grinding oil that produces minimal foam or vaporization. Used for eroding and grinding polycrystalline diamonds, HSS, and hard metals, its composition minimizes cobalt leaching. It is manufactured by enriching pure synthetic products with satellite electrodes and adding age-stable, high...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers