Hitachi Power Tools (Koki)

Framing Nailer uses offset, round head, wire weld nails.
Construction Equipment and Supplies

Framing Nailer uses offset, round head, wire weld nails.

Using nails from 2-3Â-½ in., Model NR90AF is suited for framing, siding, decking, pallet assembly, trusses, and sheathing. Tool-less depth of drive allows for flush fastening of various materials, while hardened claw tip minimizes wear on nose and slippage when driving at angle. Rear loading magazine holds up to 100 nails, and when tool is empty or if nail count runs low, dryfire lockout...

Read More »
Sliding Compound Miter Saws measure 8½ in.
Machinery & Machining Tools

Sliding Compound Miter Saws measure 8½ in.

Powered by 9.5 A motors and featuring no-load speed of 5,500 rpm, Models C8FSE and C8FSHE slide compound miter saws weigh 31 and 32 lb, respectively. With bevel range of 48° to left and 5° to right for precise compound cuts, they feature thumb-actuated positive stops to adjust miter angles of 15, 22.5, 31.6, and 45° to both left and right. Portable units can handle materials up...

Read More »
Compact Gas Finish Nailers are lightweight and maneuverable.
Construction Equipment and Supplies

Compact Gas Finish Nailers are lightweight and maneuverable.

Including 3 models each with capacity of 100 nails, gas finish nailers combine lithium ion battery technology and gas fuel cell to hold fasteners up to 2Â-½ in. in length. Model NT65GS applies 16 ga fasteners from straight magazine, while angled 15 ga NT65GA and angled 16 ga NT65GB allow for easy maneuverability in tight corners and spaces. Units feature double actioned nail feed and...

Read More »
Micro Impact Driver delivers 930 lb-in. of torque.
Agricultural & Farming Products

Micro Impact Driver delivers 930 lb-in. of torque.

Weighing 2 lb and measuring 5Â-½ in. in length, Model WH10DL utilizes 10.8 V Li-Ion battery to drill and drive into wood, metal, and concrete. Tool features quick change ¼ in. hex chuck and variable speed trigger. By partially depressing trigger, LED light illuminates work surface, allowing user to see clearly to set up application. Delivering steady stream of power throughout every...

Read More »
Pneumatic Staplers suit construction sheathing/roofing tasks.
Packaging Products & Equipment

Pneumatic Staplers suit construction sheathing/roofing tasks.

Model N5010A stapler fires Â-½ in. standard-crown 16 ga staples ¾-2 in. in lenghth. Using 15/16 in. wide-crown 16 ga staples from 5/8-2 in. long, N5021A also features dial for adjusting drive depth. Both devices weigh less than 5 lb and include nose with tool-less release for extraction; top-load, stainless steel plated plastic magazine with open design for monitoring staple...

Read More »
Compact Rotary Hammer allows access to tight areas.
Agricultural & Farming Products

Compact Rotary Hammer allows access to tight areas.

Suited for overhead and extended use applications, DH22PG is powered by 5.4 A, 620 W motor and provides mode selector dial to facilitate conversion from rotary hammer to drill-only operation. This 7/8 in. SDS Plus Rotary Hammer can drill small-diameter anchor holes in concrete, drill through wood and metal, as well as fasten with chuck adaptor. Adjustable 360° side handle can be removed for...

Read More »
Cordless Hammer Drill utilizes 1.5 Ah lithium ion battery.
Agricultural & Farming Products

Cordless Hammer Drill utilizes 1.5 Ah lithium ion battery.

Featuring non-slip elastomer grip handle and weight of 4.2 lb, 9.37 in. long DV18DCL promotes user comfort while delivering up to 345 lb-in. torque for drilling, driving, and fastening. Tool delivers max impact of 21,000 bpm, and 2-speed transmission enables no-load speeds of 0-400 or 1,500 rpm. In addition to specialized clutch settings for drilling-mode and hammering-mode, 22 other driving...

Read More »
Micro Driver Drill features 10.8 V lithium ion battery.
Agricultural & Farming Products

Micro Driver Drill features 10.8 V lithium ion battery.

Micro driver drill, Model DB10DL, measures less than 6 in. long and weighs 1.8 lb. With 88 lb-in. of turning torque and 21+1 stage clutch, drill can drive 130 three in. screws into wood during single battery charge. Features include battery charger that prevents overheating or power loss, Â-¼ in. hex chuck that allows for simple bit replacements, and optimized handle dimensions that create...

Read More »
Cordless Impact Driver delivers 1,150 lb-in. torque.
Portable Tools

Cordless Impact Driver delivers 1,150 lb-in. torque.

Featuring 2-piece magnet motor, 18 V Model WH18DFL operates on 1.5 Ah lithium ion battery, which minimizes tool weight and user fatigue. Tool provides no-load speed up to 2,500 rpm and impact rate of 3,000 bpm. Weighing 3.3 lb, driver includes electric brake, electronic feedback power control switch, Â-¼ in. hex drive chuck, 5-position adjustable belt hook, and integrated LED work light....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers