Hitachi Power Tools (Koki)
Braselton, GA 30517
Jig Saw features 4 -stage orbital action.
With 5.8 A motor, Model CJ110MV Variable Speed Jig Saw has ergonomic design that incorporates curved D-shaped handle to provide secure grip and elastomer compound that covers saw to absorb vibration. Saw features 1 in. stroke length, max cutting capacity of 3/8 in. for metal, tool-less blade changing system, front mounted LED light, and dust blower. Weighing 4.9 lb, saw is suited for use by...
Read More »Demolition Hammer delivers 19.2 ft-lb of impact energy.
Equipped with 12.5 A motor, 20 lb SDS Max Demo Hammer Model H60MRV features variable speed control dial, no-load noise level of 91.5 dB, vibration absorbing handle that flexes on sides to isolate shock, and adjustable side D-handle that rotates 360Ã-
Read More »Cap Nailer is suited for installing sheathing.
Weighing 5.5 lb, NV50AP3 employs cap nail functionality that produces equal amount of pressure around outside of cap for flush fit to material being held. It accepts plastic or metal caps and holds 350 caps and 350 nails per coil in translucent magazine. Along with aluminum housing, 2 in. cap nailer features tool-free depth adjustment dial, 360Ã-
Read More »Corded Impact Wrench produces 450 lb-ft torque.
Utilizing 7.5 A, 850 W motor, Ã-¾ in. Model WR22SA generates 1,800 rpm and 2,000 ipm impact rate. Armature bearing is seated in aluminum to withstand high heat and stress from extreme use. Internal double insulation technology enables aluminum housing to be intertwined with injection molded inner nylon core. Soft elastomer compound covering absorbs vibration and provides slip-resistant grip,...
Read More »Orbital Sander is suited for extended period use.
Measuring 5 11/16 in. high, 3 lb SV13YA random orbit finishing sander employs 230 W, 2.0 A motor that operates at speeds from 7,000-12,000 rpm. Ball bearing construction and sealed switch protect sander from dust, while ergonomic palm grip minimizes vibration and prevents slippage. Unit has hook and loop pad system for attaching sanding paper and comes with integrated dust collection bag. Product...
Read More »Power Generators are readily maneuvered around jobsite.
Models E43, E60, and E71 are 8, 11, and 13 hp generators providing 4,300 W/35.8 A, 6,000 W/50 A, and 7,100 W/59.2 A, respectively. Each features four 120 V, 20 A GFCI receptacles for safe operation in outdoor environments, and 120 V, 30 A twist lock for prevention of power supply interruption. Units are surrounded by mobility carts with oversized tires that roll on muddy or rough terrain. Each...
Read More »Miter Saw requires zero rear clearance.
Sliding dual compound miter saw, Model C12LSH, features 12 in. TCT blade, top-mounted digital LCD scale that displays miter and bevel readings, and laser marker with micro-dial for cutting accuracy. Sliding arm moves along fixed rails, enabling saw to sit nearly flush against wall on bench top. Powered by 15 A, belt-driven motor with 1,850 W of max output power, saw offers miter ranges of 0?57?...
Read More »Rotary Hammer provides 3 modes of operation.
Equipped with 7.0 A motor, 15/16 in. SDS Plus Rotary Hammer, Model DH24PF3 produces 2.5 lb-ft impact energy, no-load speed of 0?1,150 rpm, and impact rate of 0?4,600 ipm. Three modes of operation include drilling only, hammering only, and hammer drilling, controlled by mode selector dial located under body. When using cold chisel or spade bit, variable lock mechanism, available in hammer mode...
Read More »Cordless Driver Drills weigh less than 4.5 lb.
Models DS18DVF3, DS14DVF3, and DS12DVF3 are 18, 14.4, and 12 V cordless power drills with 2-piece magnet motors delivering 400, 300, and 230 lb-in. torque, respectively. Two-speed transmission controlled by 1-touch speed shift knob allows user to select between 0-400 or 0-1,200 rpm on DS18DVF3 and DS14DVF3 models and 0-350 or 0-1,050 rpm on Model DS12DVF3. Measuring just over 7.5 in., units...
Read More »Rotary Hammer features vibration absorbing grip.
Featuring 5.9 A motor with 620 W input power, 7/8 in. Model DH22PB cuts concrete, mortar, and tile. It offers drilling only or hammer drilling modes, lock-on speed button for continuous operation, and electronic variable speed control of 0-1,150 (0-640 reverse) rpm and 0-4,400 ipm impact rate. DH22PB weighs 5.1 lb, is 13.81 in. long, and features mode selector dial, lock-on speed button, and...
Read More »