Hitachi Power Tools (Koki)
Braselton, GA 30517
Impact Wrench features ergonomic design.
Covered in soft elastomer compound that absorbs vibration and provides slip-resistant grip, Ã-½ in. WR16SA is constructed with aluminum housing intertwined with injection molded inner nylon core. Armature bearing is seated in aluminum to withstand heat and stress resulting from extreme use. Weighing 6.17 lb, this 10.15 in. long tool uses 4.2 A, 480 W motor to produce up to 3,190 lb-in. torque...
Read More »Gas Wheelbarrow Air Compressor has portable design.
Designed to withstand jobsite use, 5.5 hp EC2510E incorporates cast iron pump and oversized oil level sight glass. Base plate integrated control panel protects gauge, regulators, and plumbing while centralizing all controls to facilitate in-field use. Product cycles from 116-145 psi and also features pneumatic throttle control, over-sized flywheel and head scoop, braided stainless steel exhaust,...
Read More »Cordless Hammer Drills power through many materials.
Powered by 2-piece rare-earth magnet motor and motor cooling system, tools can drill, drive, and hammer into wood, plastic, steel, aluminum, brick, and concrete block. Two 3.0 Ah NiMH batteries power DV18DMR 18 V drill to deliver 550 lb-in. of torque. DV14DMR 14 V delivers 460 lb-in. of torque with two 2.0 Ah NiCD batteries. Drills offer 2-speed transmission, no-load rpm, Ã-½ in. industrial...
Read More »Impact Drivers/Wrenches have cordless, balanced design.
DMR series includes 9.6 V (WH9DMR, WR9DMR), 12 V (WH12DMR, WR12DMR), 14.4 V (WH14DMR, WR14DMR), and 18 V (WH18DMR, WR18DMR) impact drivers and impact wrenches. Along with 2-piece motor with copper coils, series incorporates integral Cool Flow system that minimizes risk of motor burnout. Series produces 930-1,950 lb-in., depending on model, and has electronic feedback power control switch that...
Read More »Drywall Screwdrivers offer ergonomic design.
Models W6V4, W6VA4, W6VB3, and W6VM feature respective no-load speeds of 0-4,500, 0-3,000, 0-2,600, and 0-6,000 rpm as well as max torques of 81.5, 112.7, 139.6, and 69.4 lb-in. All are equipped with 6.6 A motors and 750 W of input power. Bodies and handles are covered in elastomer compound for slip-resistant grip, and handles are angled outward to conform to hand during repetitive use....
Read More »Compound Miter Saws offer range of 0-52-
Model C12LC includes digital LCD display to view miter and bevel readings, while Model C12FCH features laser marker that indicates where blade will cut material and can be adjusted to right or left. Both 12 in. saws are powered by 15 A motor with 1,950 W of max output power. Standing at height of 5 1/8 in., pivoting aluminum fence allows crown molding to be cut vertically. Miter angles can be...
Read More »Clipped Head Framing Nailer can fasten engineered lumber.
Featuring aggressive design that minimizes user fatigue, 7 lb, 3.5 in. NR90AD operates at pressures from 70-120 psi. Selective actuation allows user to switch sequential to contact fire, while tool-less depth of drive dial adjusts for flush or countersunk drives into varying material. Also included: carbon steel toenail and nose mounted vibration pads; rear-loading, 2-piece aluminum magazine; and...
Read More »Cordless Driver Drills withstand demanding projects.
Rated 18 V, Model DS18DMR delivers 550 lb-in. torque and comes with two 3.0 Ah batteries. Using two 2.0 Ah batteries, 14 V Model DS14DMR produces 450 lb-in. torque. Both feature 2-speed transmissions with no-load rpms of 0-400/1,600. Drills include rare earth magnet motors, replaceable armatures, externally accessible carbon brushes, industrial-grade Rohm chucks, 22-stage ratcheting slip-clutch,...
Read More »Hammer Drills are cordless and keyless.
Cordless 14V Model DV14DV and 18V Model DV18DV 1/2 in. hammer drills have impact rates of 0 to 18,000 beats/min (BPM) and 0 to 22,500 BPM, with torque of 346 and 400 lb-in., respectively. With turn of selection dial on head of drill, tools can switch from serving as driver drill to hammer drill. Both have one-touch speed shift knob, adjustable slip-clutch with 22 stages, fan-cooled motors, and...
Read More »Impact Tools run off battery power.
DM series cordless impact tools include WH9DM and WH12DM impact drivers and WR9DM and WR12DM impact wrenches. Impact drivers can perform all functions of screwdriver and, by attaching different bits, can drill or tighten and loosen nuts and bolts. Impact wrenches also tighten and loosen nuts and bolts. Both are available in 9.6 and 12 V models, with 800 and 1330 in. lb torque, respectively....
Read More »