Sokymat SA
Granges CHE
Share:
Locking Pins are used where quick release is needed.
Kwik-Lok pins are available in five handle styles: T, L, button, recessed button and ring. When buttons are depressed, balls at end of grip shaft retract, permitting insertion or removal. Standard sizes range from 3/16 to 1 in. OD in 1/2 to 6 in. grip lengths. Metric sizes are available from 5-25mm OD in 10-100mm grip lengths. All are made of 17-4 PH stainless steel or carbon steel.
Read More »
GDC Filter has durable plastic frame.
ABS plastic frame for Granular Dacor Carbon (GDC) filter is suitable for incineration or landfill disposal. Cartridge is available with specialty carbons for treating light, molecular-weight contaminants and removal of hydrogen sulfide, ammonia, and formaldehyde. Filter uses premium granulated coconut shell carbon in laminated honeycomb. Low pressure drop makes it suitable for retrofitting. It...
Read More »
Digital Valve Driver works with valves, motors and pumps.
Programmable DVD-2 pulse width modulated (PWM) solenoid driver can control any brand proportional valve, motors, pumps or other device that responds to PWM signals. Software-based unit operates by processing low power analog input signal to produce corresponding high power, high efficiency PWM output signal. Source of analog signal could be control levers, potentiometers or PLC. Unit comes in...
Read More »
Tone Generator and Tracer check continuity on circuits.
JToner provides audible tone on pair one which is inductively picked up and amplified by Jtracer. System has modular plug and separate alligator clips for pair connection. Tracer offers adjustable volume and momentary activation switch. Tip is non-conductive, eliminating shorts when running terminal blocks. Both operate on 9V batteries. Units are available separately, or as set packaged in...
Read More »Epoxy Board is designed for use at temperatures to 250-
Ren Shape 5008 epoxy board can be machined with carbide cutters to generate molds with good edge definition, dimensional stability, and smooth surface finish. It can be used to produce intermediate-temperature models, heat-resistant thermoform tooling, and lay-up tools for composite parts. Molds may be produced for thermoforming detailed, production-quality parts from polypropylene, polystyrene,...
Read More »
Projection Lenses are for slides and AV presentations.
Multi-element slide/AV projection lenses are available in format sizes of 24 x 36mm and 38 x 38mm. Lenses are of 3, 4, 5, 6, 7, 8, 9 and 14-glass element designs, mounted in compact, durably constructed metal or plastic housings. They have 42.5 or 52.5mm mount diameters, helical groove or focusing rack, fixed focal lengths and speeds from 26mm f/2.8 to 250 f/4.0. Variable focal lengths and speeds...
Read More »
Elevating Platform can pick up workers in wheelchairs.
Easy Riser positions person at comfortable height on assembly line, service counter or any other workstation. Platform is wide enough to accommodate most wheelchairs. System includes padded platform surrounded by safety rails. Elevating mechanism consists of hand or electrically operated hydraulic pump connected to 4 struts. When pump is activated it causes fluid to be forced into struts thus...
Read More »
Corner Cushions protect products from damage.
Corner Keeper protectors are made from extruded polyethylene foam to provide non-abrasive surface areas and protection against multiple impacts. Protectors are fabricated from closed-cell polyethylene foam extrusions. Cylindrical profile is pneumatically cut to produce shape that mimics 3-dimensional, 90Ã-
Read More »
HMC can machine five ton parts measuring 5 x 6 ft.
A100E Horizontal Machining Center weighs 66,000 lbs, has footprint of 212 x 394 in., and can handle parts measuring 74.8 x 59.1 in. and weighing up to 11,000 lbs. X, Y and Z-axis travel is 66.9 x 53.1 x 55.1 in., respectively, and cutting feedrates and traverse rates are 1,970 in./minute. Acceleration is 0.4G. It takes tools up to 11.1 x 23.6 in.
Read More »
Panel-mount PCs feature 15.1 in. TFT LCD display.
SuperTrim(TM) STR 15 industrial-grade PCs are designed with sealed front panel, NEMA 4/12 aluminum bezel and steel internal chassis. The 15.1 in., 250-nit LCD displays feature 1024 x 768 pixels. Network-ready PCs provide 2 USB ports, 4 COM ports, 10/l00 Base-T Ethernet port, and RJ-11 digital I/O port (2 In and 2 Out). They are powered by Pentium III 800-MHz CPUs or CeleronÃ-® 533-MHz...
Read More »