Sokymat SA
Granges CHE
Share:
TEM Systems remove every burr.
TEM (Thermal Energy Method) systems perform internal and external deburring of cast iron, steel, stainless steel, and aluminum parts with intense bursts of heat. They also perform deflashing of die cast zinc parts. Both manual and fully automatic TEM systems are available. Parts are sealed in deburring chamber by 250 ton force, and oxygen/natural gas mixture is introduced. Machine-initiated park...
Read More »
Liquid Flow Switch has PP/Rytron-® or PVDC construction.
Model FT10 Thermo-Flo(TM) offers adjustable switch setpoints from 0.04 to 3 fps. LED indicates flow or no-flow status, and relay or FET output provides secure interface with remote devices. Two probe lengths, one for pipe sizes from 1/2 to 1 1/2 in., and one for 2 in. and up, are available. Thermal dispersion flow switch measures liquid temperature to determine changes in flow velocity, and is...
Read More »
Industrial Switches are available in 5 types.
Detent-Action Switches, for 5-30 amps at 600 volts, provide up to 16 positions and 75 poles. Snap-Action Switches, for 20-200 amps at 600 volts, provide up to 4 positions and 12 poles. Cam-Action Switches, for 25-800 amps at 600 volts, provide up to 12 positions and 24 poles. Tap Switches have dual (continuous/intermittent) ratings ranging from 100-2400 amps, and are available in 1-, 2-, or...
Read More »
Warehouse Software offers virtually unlimited capacity.
Warehouse Rx(R) scalable Warehouse Management Software (WMS) offers solutions for manual warehouse operations through fully automated distribution systems. Limited only by disk space, it operates in systems with as few as 20 SKUs to systems with as many as 90,000. Real-time inventory control provides no delay from when items are entered into WMS and when they are stored, picked, or shipped....
Read More »Silicone Gasketing Material can be used on timing covers.
LoctiteÃ-® 5970 cured-in-place, silicone gasketing material has fluid resistant formulation that is suitable for flange sealing applications with excessive joint movement. This black, single-component, alkoxy RTV silicone paste is resistant to liquid coolants, oil, and other automotive engine fluids. Non-slumping and non-corrosive, Loctite 5970 low odor, low volatility material does not...
Read More »CNC Lathe finishes large wheels.
ASL 2400 2-axis CNC lathe provides finishing on wheels up to maximum of 24.5 in. It has one-micron encoders, precision spindle balanced to less than 3 g, and box-way construction for heavy metal removal while maintaining accuracy during interrupted cuts. Maximum spindle speed is 3,000-rpm with acceleration/deceleration time of less than 3.4 sec using standard finger chuck, top tooling, and wheel...
Read More »Steer Loader offers selectable steering modes.
A220 All-Wheel Steer Loader features all-wheel steer and skid-steer modes adjusted by flipping 1 switch in operator's cab. All-wheel steer mode minimizes disturbance of ground and other surfaces, and decreases wear on tires. Skid-steer mode allows operation in tight, confined areas. A220 includes 2-speed travel option, low-effort joystick controls, low-speed/high-torque inching mode, foot pedal...
Read More »Vertical Lift Module connects multiple work areas.
MegaLift Vertical Lift Module (VLM) consists of vertically arranged trays, extraction platform, and computerized controls in enclosed system. Dual access VLMs can be equipped with extraction platforms above and below or in front and back. MegaLift VLM can store up to 550/2,000 lb per tray with total max payload of 44,000/88,000 lb. It travels at vertical speed of 160 fpm, and has standard...
Read More »
Aisle Lighting reduces luminaire requirements by 25%.
LogistixPro delivers 40% more horizontal illumination than standard high bay lights, thus reducing luminaire requirements by 25%. It has vertical lamp orientation with multi-faceted reflector that provides uniform vertical illumination on shelves. Lights can be combined with pulse start ballasts and high/low controls to further reduce operating costs.
Read More »
Production Taps have excellent abrasion resistance.
MX Series DIN overall length production taps are made from premium PM material for toughness and wear resistance, which results in long tap life and core and edge strength. MX Series is available with TiCN coating. Coolant feeding styles permit rapid chip evacuation. Type MXP Spiral Point taps suit through-hole tapping; type MXL Spiral Flute taps suit blind hole work.
Read More »