Siemens AG
Munich D-80333 DEU
Share:
Welding Helmet protects worker from overhead hazards.
Speedglas ProTop combination hard hat, welding helmet and auto-darkening lens system is for welders working in areas with overhead hazards, such as cranes, protruding beams and moving machinery. Pivot mechanism connects welding helmet to hard hat. Low profile hard hat works well when entering space-restricted areas. Its short brim design means welding helmet and lens are closer to welder's face,...
Read More »
Torque-Controlled Screwdriver uses all-metal gearing.
Model BL-5000 torque-controlled driver's brushless motor eliminates carbon dust. Its brushless design is rated for continuous use with minimal heat build-up. Intended for medium to light torque assembly applications, BL-5000 drivers automatically stop when pre-set torque is obtained. Torques, adjustable via hex wrench, can be set between 1.77 and 10.6 lb-in. BL-5000 can convert from lever-start...
Read More »Press is designed for CCL applications.
Ultra Low Deflection Press, used for copper-clad laminate applications utilizing PTFE, provides high pressure operation at 2100 tons. Vacuum system is 59 in. x 88 in. with 5 openings and 19 in. rams. System permits no more than 0.0004 in. deflection over 4 ft span with parallelism of 0.0007 in. per ft. Press is heated with oil for uniformity of heat and offers temperature control of +/- 5Ã-
Read More »Universal Epoxy bonds well with glass ceramic.
AngstromBond AB9320 two-part, blue epoxy, low-stress adhesive will not cause fiber core cracking or fiber pistoning. This low viscosity system can be cured in 10 minutes at 100Ã-
Read More »
Abrasive Wheels provide aggressive cutting.
Cyclone Flap Wheels, made with aluminum oxide abrasive resin cloth, are available in stem-mounted and unmounted versions. Stem-mounted wheels are used in manual operations on portable tools and provide consistent aggressive action in hard-to-reach areas. Unmounted wheels are used on bench grinders and provide controlled grinding, finishing and deburring action on machined parts and flat surfaces....
Read More »
Hand-held Tachometer small enough to slip into pocket.
Small, thin and lightweight, HT-4100 tachometer weighs less than 4 oz. For operation, user aims red light beam at reflective marker and on-target indicator light will flash to indicate on target. Light beam has range of 12 in., allowing measurements to be taken up to 50,000 rpm with accuracy of 1 rpm. Last measured value is automatically held in memory for one min.
Read More »
Controller provides consistent repetitive dispensing.
Pneumatic Model Z620 controller, with z-axis motion, dispenses liquid to controlled height for filling and potting applications in automated lines and conveyor-fed stations. Unit is attached to Model DSP501A dispenser which controls dispense time and air pressure. Adjustable-height dispenser, secured to vertical stainless-steel rod, may be angled. Stroke adjustment is from 0.20 to 2.00 in....
Read More »Electrical Tools for precision cutting, stripping and crimping.
Hand tools for electrical work include: #46E Wire Cutter/Stripper/Crimper; #70E Coax Stripper/Crimper/Cutter; #72E Dual Romex Cable Stripper/Cutter; #62R Automatic Retaining Ring Pliers; #73E Wire Stripper/Cutter; #52E Wire Stripper/Crimper/Cutter; and #700E, a 3-piece set of Mini Cutters/Strippers/Crimpers. All have corrosion-resistant, black-oxide finish; ergonomic, cushion-grip handles; and...
Read More »Transmitter finds buried cable and utility lines.
RIDGID(R) KD-4000 Line Transmitter applies tracing signal onto buried line or cable, allowing it to be detected by RIDGID(R) KD-4510 or KD-4550 line locator. Signal can be transmitted by connection cord, induction from transmitter case, or induction from optional signal clamp. Kit includes carry case, color-coded connector cord, ground rod, and 8 D-cell batteries.
Read More »Laser Cell Handles big, heavy sheet metal.
Automated laser load/unload cells can automatically load, cut, and unload sheets up to one in. thick. Its 4,000-watt laser cuts sheet sizes up to 4x8, 5x10 or 6x12 ft. Pneumatic loader picks up one sheet of plate at a time and carries it to laser. Just before loader places sheet on laser bed, fork style unloader picks up cut sheet. As laser begins cutting new sheet, unloader carries cut sheet to...
Read More »