SEVAAN GROUP Pty Ltd
Minto AUS
Share:
Touch Fingerprint Sensors mount under glass.
Intended for smartphones and other mobile devices, OneTouchÃ-® FPC1200 Series can be mounted under sheet of glass or ceramics. First sensors in series will be covered by zirconia, a high-gloss ceramic with durable surface that can be mass produced in multiple colors and form factors to support latest design trends.
Read More »
Rackmount DC Power Supply offers multiple volt/amp combinations.
Suitable for benchtop or ATE system applications, programmable model 9117 delivers up to 3,000 W of output power in any combination of voltage up to 80 V and current up to 120 A. Multi-ranging capability automatically recalculates voltage and current limits for each setting. Along with 2U, 19 in.Ã- rackmountable design, features include internal memory storage for saving/recalling up to 100...
Read More »Vertical Form-Fill-Seal Machines deliver high throughput rates.
Featuring PC-based architecture, servo motion control, and automatic setup capabilities, Morpheus (continuous motion) and Apollo (intermittent motion) respectively process bag sizes from 2–12 in. wide to 2–20 in. long and 2–12 in. wide to 3–14 in. long. Morpheus has max rated throughput of 180 bags/min throughput, and Apollo can be upgraded to continuous motionÃ- for 150+ bags/min...
Read More »Form-Fill-Seal Pouch Machines can form top or corner spout.
Using patented process for single applicator spout insertion, 1.4 and 1.7 FLtecnics Horizontal Pouch Machines provide throughput up to 85 pouches/min.Ã- Pouches range from 34–55 fluid oz, 3.3–6.7 in. wide, and 3.9–11.8 in. long. Machines are capable of packaging liquid or dry products in zippered, top or corner spout, flat, stand up, and/or shaped pouches. Available as option, stroke on...
Read More »
Bridge Deck/Rail Platform offers high-traffic area wear surface.
FiberSPAN pedestrian bridge deck and rail platform products are available with Matacryl system, which combines quartz aggregate inÃ- methyl methacrylate polymer for increased durability andàreduced roughness. Suitable for areas experiencing heavy use, Matacryl has ü in. wear surface that is UL tested for fire resistance. Product weighsà2 lb/ftò andàexhibits...
Read More »
LED Head Lamp features intrinsically safe design.
Featuring 5 operating modes, explosion proof Model EXP-LED-HL-MX2 uses 2 high-intensity CREE LEDs mounted within impact-resistant housing and is powered by 3 AAA batteries. Full power spotlight produces 115 lm beam capable of reaching over 250 ft, whileÃ- full power floodlight produces 120 lm with 5.25 hr runtime. Spot and flood light combination produces 160 lm with 3.5 hr runtime. With...
Read More »
Cable Tray/Splice Plate reduces required structural supports.
Constructed of heat-treated aluminum and pre-drilled for expansion and mid-span splice applications, 13 in. wide T&BÃ-® Cable Tray Super-Duty Splice Plate™ eliminates need for additional supports at expansion joint. Reinforced design provides rigidity, resistance, and strength and allows for true contraction and expansion under full loads. Nylon washers facilitate movement by reducing...
Read More »
Snow Pushers enhance loader/tractor/skid-steer capabilities.
Available in 8 and 10 ft widths, 36-Series Snow Pushers are available for skid steers and tractors with loaders that use Universal skid steer quick attach system as well as 400/500 Series John Deere loaders and loaders using Euro/Global tool carrier. Reversible 1.5 x 8 in.Ã- premium rubber cutting edge allows use on asphalt and other surface types. Features includeÃÂ 36 x 36 x 5/16...
Read More »
Hobbing Machine produces mid-sized gears.
Fitted with either dry or wet chip evacuation systems and respective dust or mist filter options, GenesisÃ-® 400H Gear Hobbing Machine is designed for workpieces up to 400 mm in diameter and module 8. Machine features high-speed drives to utilize advanced cutting tools, including high speed steel and carbide hobs. In addition to regular hobbing processes, 400H employs process options for form...
Read More »
Alumina Ceramic molds high-temperature components.
Summary Aremcolox™ 502-1400-99, a high density, full-fired, alumina ceramic produced by Aremco Products, Inc., is now used to mold high temperature components used in highly corrosive environments to 3000 -ºF (1650 ºC) Features Aremcolox™ 502-1400-99 is a high density, full-fired, 99% pure alumina ceramic that provides exceptional abrasion and corrosion resistance as well as high...
Read More »