Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Analog Splitter divides transmitter signal.
MCR splitter takes signal from transmitter and sends two identical or different signals to receiving devices for monitoring, recording, or control. Input and two output ranges can be selected via DIP switches. Selectable analog signal ranges include 4 to 20 mA, 0 to 20 mA, 0 to l0 mA, 0 to l0 V, 0 to 5 V and 1 to 5 V. All analog range options are pre-configured and stored, eliminating need for...
Read More »
Plug-In Connectors have screw-type lock.
Heavycon Advance rectangular plug-in connector housing is suitable for applications where connection is typically not plugged, such as feed-through holes in panels. Housings are compatible with contact inserts and panel cutouts in company's Heavycon B Series range and meet specs for IP 67. They are available in grey standard housing for automotive and machine industries, housings for corrosion...
Read More »LIMS Interface connects chromatography software.
LimsLinkCDS provides secure, bi-directional interface between company's EZChrom Elite Chromatography Data System and any LIMS. Communication can take place without creating additional files outside either application, necessary for maintaining 21 CFR Part 11 compliance. Worklists and sample results can be retrieved and delivered directly to LIMS. It also provides electronic signatures, 100...
Read More »
Synchronization Module offers Free-Run and Holdover modes.
Model CTM5100 Advanced Frequency Synchronization Module synchronizes to external references and outputs clean, stable, downstream clock. It accommodates 2 reference sources via programmable inputs at 8 kHz and its synthesized output frequency is offered at selected frequencies to 38.88 MHz. Features include continuous frequency-offset based reference monitoring and qualification, phase alignment...
Read More »
Isolation Valve reduces possibility of leakage.
Series 462 Resilient-Seal 3-Way Inert Isolation Valve utilizes soft FFKM [Kalrez(R)] disc within PTFE diaphragm to create tight seal against valve. Constructed of PTFE, PEEK, and FFKM, it is suitable for handling aggressive reagents or high purity media as found in analytical instrumentation. Internal volumes and dead volumes are minimized to avoid contamination and wasting of reagents.
Read More »
Pull-Type Solenoid offers maximum force of 77.6 oz.
Model ST2552N tubular solenoid features maximum rating force of 77.6 oz at .04 in. stroke (10% duty cycle). Standard coils are available for 3, 6, 12, or 24 Vdc. Frame dimensions are 1.0 in. dia x 2.05 in. long. Compact design and rugged construction make solenoid suitable for demanding applications including printers, electronic locks, and dispensing equipment.
Read More »
Protection Device guards inventory and equipment.
Able to be used in both new and existing facilities, SEG(TM) forklift protection device is constructed of heavy-gage spring steel, and flexes when impacted. Its cushion action guides trucks into aisles between vertical racking systems, and eliminates possibility of impact between trucks and racks.
Read More »
Connectors provide power distribution to bus bars.
Amphe-Base Connectors are available in 2- or 3-position patterns, have 50 A current capability per position with 8 AWG wire, and 100 A capacity with 4 AWG wire. They are made of injection-molded UL94 V-0 rated polycarbonate, and feature molded-in contact retention. Circuit identification is designed into connectors for foolproof mating. Connectors incorporate RADSOK(R) 6mm socket, based on...
Read More »
Slitter/Sheeter offers shaftless unwind.
Roll-Fed System slits and sheets rolls of material weighing up to 8,000 lb. Material is slit, accumulated through controlled gravity loops to restrict material stretch, and cut using gap shear cutter. Gripper stacker grabs sheets and stacks them for use. Operator needs only to load roll, adjust sheet length and slit width, and unload stacks of finished material for next processing operation.
Read More »
Power Straighteners suit metal stamping applications.
Series 250 provides speed, torque, and straightening capacity needed for light gauge coil metal-stamping. Machines are typically matched with ServoMaster Series 1 and 2 servo roll feeds and 2,500 to 20,000 lb capacity coil reels. They feature oversize Crodon coated pinch rolls, 7 independent straightening rolls, cluster-gear drive drivetrain, and AC-variable speed-drive technology.
Read More »