Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Inserts press into plastic without melting.
Series 50 through-hole and Series 51 headed, through-hole press-in brass inserts can be cold pressed into plastic without heat or ultrasonic equipment. Inserts have helical knurl that optimizes plastic migration, providing good pull-out and torque resistance. Inserts can be installed with arbor press or fully automated machine into ABS and polycarbonate plastics. Applications include securing...
Read More »
Tubing Cutter cuts stainless steel.
RIDGID(R) Model 15-SI with E1525 cutter wheel provides clean, accurate cutting of stainless steel tubing. Large knob gives user more control over feedscrew torque, and allows for faster feedscrew advancement. Cutter uses 6 individual bearings that help decrease drag around tubing. Bearings create smooth, fluid cut, reducing number of rotations needed to cut tubing. It cuts tubing from 3/16 to 1...
Read More »Industrial Computer offers 2nd Ethernet port.
ICC-m Industrial Control Computer is available with 850 MHz Celeron or optional 1 Ghz Pentium III processor and 2 Ethernet ports. It is offered with standard hard drive, 64 MB RAM memory and any Microsoft(R) operating system. ICC-m can be configured with Windows NT-Embedded(R), control and HMI software pre-loaded onto flash memory. Computer includes on-board video controller with 4 MB VRAM and...
Read More »
Probe offers entirely modular design.
Advanced Atmosphere Carbon Controller XR probe (AACC-XR) features turbulent flow tip for high accuracy, even in high-flow environments. It is available in standard insertion lengths to 30 in., and with K, R, and S integral thermocouples. Full sheath is offered in RA330 low nickel alloy (for operation to 2200 deg F) or ceramic. AACC-XR is compatible with SIRO, flat slipcast, or rounded slipcast...
Read More »
RTD Temperature Assemblies suit heat tracing applications.
Temperature Sensors consist of terminal head, right-angle shaped outer sheath, and curved weld-pad. Replaceable RTD element assembly is contained in outer tube. Sensors, used as inputs into electronic heat tracing controllers and monitors, are available with different terminal heads, including aluminum and cast iron, NEMA 4X, explosion-proof, and polycarbonate. Weld-pad can be flat, or have...
Read More »
Disc Thermostats handle high power applications.
Model T10/T11 Series provides temperature control for appliances such as dryers, dishwashers, water heaters, solar heaters, HVAC equipment, and vending machines. They have manual reset with 25 A capacity, input voltage of 120 or 240 Vac, temperature range of 104 to 350 deg F, and UL approval. Switch mechanism is actuated by temperature sensitive, snap-action bimetal disc, which may be enclosed or...
Read More »
Serial Interface eliminates need for additional connectors.
Serial interface added to Series 970 Intelligent Quartzonix(TM) pressure standard directly connects Series 970 to data monitoring devices, and enables users to switch between RS232 and RS485 protocols. Series 970 combines vibrating quartz beam with miniature digital electronics to achieve fully compensated +/-0.01% FS static accuracy and resolution of +/-0.001% FS. It is available in pressure...
Read More »
Dispenser Kit eliminates adhesive-related waste.
Model 1500XL-CA tabletop dispensing unit uses microprocessor circuitry and controlled air pressure to provide control over amount of cyanoacrylate applied, allowing user to dispense same amount every time. Cyanoacrylate is contained in disposable syringe reservoir connected to dispenser console by air line. Clog-resistant, Teflon(R)-lined dispense tips provide trouble-free application. Coalescing...
Read More »
Laser Processing Systems weld and cut metallic materials.
JK802 and JK1002 Nd:YAG laser systems utilize super modulation technology, which momentarily doubles laser's output intensity up to 2,000 watts. They include fiber system with built-in process detection and intuitive, self-protecting diagnostics. Flashlamps, which are designed for more than 1,000 hours of operation, are modular and can be changed on production floor. Systems are available with...
Read More »
Conveyors offer 1 or 2 adjustable pivot points.
LPZ Series provides load capacity up to 1,000 lbs and maximum conveyor speed of 600 fpm. Conveyors are available in widths from 6 to 48 in. in 2 in. increments, and come in any distance in 1/8 in. increments. They include sealed bearings, T-slots for mounting of accessories, and optional V-guided belts for no tracking adjustments. Applications include packaging, plastic molding, metal forming,...
Read More »