Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Accelerometer weighs 0.2 grams.
Miniature (0.11 x 0.23 in. footprint) model 352C23 ICPÃ-® mounts onto space-restricted locations. Structured with shear mode, piezoceramic sensing element and built-in signal conditioning microelectronics, adhesive mountable sensor produces clean, 5 mV/g output signal. Frequency response spans from 2 to 10 kHz, and resonant frequency is greater than 70 kHz. Features include anodized aluminum...
Read More »
Embeddable Accelerometers are suited for OEM requirements.
Series 660 piezoelectric accelerometers are available in three sizes that provide various sensitivities in ICPÃ-®, voltage, and charge mode configurations. All units offer broad frequency response, high signal-to-noise ratio, wide operating temperature range, and low power operation. Units are suitable for vibration and shock measurement applications such as impact detection and recording for...
Read More »
Pressure Sensors work in paper slurries.
Models 106C10 and 106C20 ICPÃ-® piezoelectric sensors measure fast pressure transients, surges, spikes, and pulsations in paper slurry systems. They can be used to detect and monitor dynamic pressure pulsations in headbox and piping systems, and troubleshoot and determine cause of slurry flow irregularities. Both generate low-noise, 300 mV/psi output signals capable of detecting minute...
Read More »
Load Cell Option provides 4 to 20 mA output signal.
Company's entire line of general purpose and fatigue rated load cells are available with optional signal-conditioning circuitry to provide 4-20 mA output and current mode, 2 wire, loop powered operation from any unregulated, 8 to 36 Vdc power supply. Additional signal conditioners are not required. Advantages include improved signal-to-noise ratio, ability to transmit signals over long distances,...
Read More »
LDO Controller drives digital ICs.
MIC5159 low dropout regulator controller drives low-voltage DSPs, microcontrollers, and logic ICs. Available in IttyBitty(TM) SOT-23-6 package, it requires very little headroom to provide well-regulated supply of 1.5, 1.8, or 2.5 V. Device's headroom, or dropout voltage, is limited only by RDS(ON) of external MOSFET. It has fast transient response, good regulation over variation of line, load,...
Read More »
Category 6 Cable transmits 10 billion bits/sec.
CatLink 6 Plus exceeds TIA/EIA current draft requirements for Category 6. It has been tested to 500 MHz, or twice the 250 MHz frequency TIA requirement, and is capable of 1,000 MHz speed. Cable has dielectric spacer, ripcord, and sequential footage markings. It is available in variety of standard jacket colors. UL listed for general purpose, riser, or plenum applications, cable is ETL verified...
Read More »
Liquid Filtration Systems clean machine tool coolant.
Filter systems are suitable for metal working and parts cleaning. They have permanent stainless steel filter elements, and spiral coils that open evenly from top to bottom for 100% cleaning with every backwash. Applications include removing aluminum, plastic, and cast iron fines from machine coolant; and protecting high pressure pumps, tools, nozzles, and wash baths. Filter systems are available...
Read More »
Carbide Tool Coating lasts longer, removes more material.
Tests show that BALINITÃ-® X.CEED coating for carbide tools increases service life up to 3x versus company's previously used coatings. Cutting tests involved materials with hardness up to 62 HRC. It works on materials that are difficult to machine, such as titanium alloys and nickel-based metals.
Read More »
Tilt Cart moves containers up to 2,500 lb.
Lift and Tilt Cart rolls on 6 heavy-duty casters with precision sealed bearings for easy manual movement and steering. To form train, carts can be linked together using foot operated hitch receivers. Equipped with hydraulic damper, cart enables controlled tilt of load up to 45Ã-
Read More »
Weighing System includes load cell and conditioner.
TRA/TM0-1 system includes TH Series thru-hole load cell and TM0-1 12 Vdc powered amplifier/conditioner module. Compression-type load cell is constructed from stainless steel and is available in ranges from 50 to 50,000 lb. Balance and span pots are low tempco metal film for long-term stability and good resolution. System is suitable for industrial and OEM force measurement and weighing...
Read More »