Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Cold Plates suit high-watt density applications.
High Performance Series(TM) cold plates offer corrugated aluminum fins, which provide heat transfer surface. Vacuum brazing produces parts with uniform thermal conductivity over large surface area. Cold plates may be customized to any application and are available in sizes from 4 to 700 inÃ-² (as thin as 0.10 in.). They are manufactured by inserting aluminum fin into aluminum plate with...
Read More »Locking Cylinder holds load stationary at machine shutdown.
Original Line Rod Lock cylinder incorporates clamp/cam device to hold piston rod in position upon loss of air pressure. Holding forces range from 40 lbs in 3/4 in. bore cylinder to 700 lbs in 3 in. bore. Device is available in 6 bore sizes from 3/4 through 3 in. Suitable for drop prevention in various applications, Original Line Rod Lock is also suitable as failsafe device in counterbalance...
Read More »
Industrial PCs suit various HMI applications.
TELEMECANIQUE MAGELISÃ-® iPCs offer LCD screens, power supplies, floppy disk/CD-ROM drives, and up to 6 expansion slots. Impact- and vibration-resistant displays are available in 12 or 15 in. touch screens. PCX PLC coprocessor cards enable distributed I/O management on fieldbus and integrates control system functions in PC. Choice of CPUs varies from Celeron 566 Mhz to Pentium III 850 Mhz....
Read More »
Metalizing Ceramics are available for beryllium oxide discs.
Thick-film metalizing and sputtered thin-film metalized patterns are available for company's line of BeO discs, discs with flats, washers, and heat sinks. Thick-film metalizing techniques include screen printing, spraying, and roller coating. Sputtered thin-film metalized patterns permit tightly spaced lines to be applied to fired ceramic substrate. Patters use molybdenum-manganese refractory...
Read More »
Hydraulic Collet Closers ensure accurate workholding.
Designed for workholding applications that require fast loading and unloading of parts, Model 5C operates at line pressure of 750 psi hydraulic (max) and accepts all 5C collets, while Model 16C operates at 2,000 psi hydraulic (max) and accepts all 16C collets. Each model offers double-acting design for positive opening and closing of collets and fixed length operation. Orientation holes in base...
Read More »Workforce Planning Software determines shift deployments.
SL5Ã-© enterprise human resources planning system works with existing attendance hardware and ERP systems. It optimizes shift deployment and human resource usage, ensures that adequate coverage is maintained, and allows managers to automate and improve operations management. Software provides extensive and comprehensive realtime information on direct labor costs. It uses open architecture...
Read More »
Torquemeters are insensitive to EMI.
MCRT 79000V Series Dual Range non contact torquemeters have two ranges with independent outputs. Dual range capability eliminates need to change torquemeters when production is switched between different products. Accuracy is 0.1% of full scale, traceable to NIST, even if ratio of peak to average torque is high, such as when starting and stopping high inertia loads. Torquemeters are available in...
Read More »High Performance Saws cut ferrous and nonferrous metals.
AmsawÃ-® 150 high performance saw uses thin carbide or cermet tipped circular saw blades to cut ferrous and non-ferrous material accurately. Options include bar manipulating, computerized weight measuring to establish length of cut, infeed, outfeed, stacking, and chip disposal systems. Blade maintenance service is also available.
Read More »
LCD Monitors can be mounted from front or rear.
1747L and 1767L 17 in. Entuitive touchmonitors for kiosk, industrial, POS, or gaming applications have removable anodized bezel that converts monitor from front mount to rear mount. Both have 250 NIT panel; DVI-D interface; VESA mounting; wiper blade touch screen to bezel seal; and UL, cUL, FCC, CE, and TUV-GS approvals. Serial and USB touch interfaces are available for AccuTouch resistive, and...
Read More »
Vertical Machining Center is suitable for dies and molds.
V56 VMC machines dies for precision press dies, mold base of plastic molds, and forging dies. It virtually eliminates need to polish small and medium size dies and molds. It can handle workpieces as large as 41.3 x 28.3 x 17.7 in. weighing up to 1,760 lb. VMC has 40 taper, 20,000 rpm spindle, spindle core cooling, under race lubrication system, 0.000002 in. feedback system, and traverse and...
Read More »