Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Linear Actuator suits short-medium stroke applications.
Model LA16-27-000A fully enclosed, linear voice coil actuator assembly comprises 0.157 in. dia by 0.78 in. long output shaft with internal bearings, flexible coil connection circuit, and anti-rotation feature. Non-commutated linear servo-motor features total stroke of 0.24 in., continuous stall force of 3.03 lb, and 10 sec peak force of 13.5 lb. Voice coil technology combined with low friction...
Read More »Clutch-Brake is redesigned with fewer parts.
Through-Shaft Clutch-Brake features single-piston engagement eliminating clutch and brake overlap. Pilot accommodates pulleys, sprocket mounting, or coupling attachments. Small air chamber volumes allow for high cycle rates and low air consumption. Clutch-brake is suitable for packaging, material handling, food processing, automotive, wood products, printing, and converting applications.
Read More »Inspection Software suits heat-sealing applications.
Packging Inspector uses Stinger Thermal Imaging Camera to look at real-time heat images at speeds up to 60 frames per second. Image data can be stored for playback at different speeds, used for online process control, or exported into database for quality control purposes. Software is fully user-configurable, and allows for set up, display, and archiving of thermal images. Min, Max, and Avg...
Read More »Safety Valve offers pull ring for testing.
Figure 15LC Safety Valve is ASME Section VIII UV certified and is suitable for bulk hauling railroad and truck tank cars. It provides tight shutoff, sharp popping and closing action, and repeatability. Proper alignment of seating surfaces is assured by integral inlet and body casting. Its threaded 2 in. aluminum body handles pressures from 5 to 15 psi and temperatures to 250Ã-
Read More »Control Valve converges and diverges liquid flow service.
Class DOT 3-way control valve has one-piece body construction with spring-loaded Teflon chevron stem packing that eliminates need for periodic adjustment. Cage-guided trim reduces stem load and adds to valve stability; there is no need to remove DOT from line to replace trim. Control valve is available with cast iron or bronze body in 1 through 3 in. sizes. It is offered with threaded or flanged...
Read More »Worm Gearmotor provides high torque output.
G33 Right Angle Gear Head is for use with M6000 and M4000 PMDC motors. It features externally replaceable brushes, bronze alloy gears, anti-friction bearings, and lifetime oil bath lubrication. Unit offers speeds to 500 rpm and torque ratings to 175 lbs-in. Typical applications include welding wire feeders, conveyor drives, packaging equipment, floor cleaning equipment, and food processing...
Read More »Tag-Along Trailers offer 20 and 25 ton capacities.
TAG20L and TAG20XXL are 20 ton models featuring 19 and 22 ft flat decks, respectively. TAG25L and TAG25XXL are 3-axle, 25 ton models with 19 and 22 ft flat decks, respectively. All models include 8Ã-
Read More »Gas Mixer allows precision mixing of up to 4 gases.
Pegas 4000MF operates under control of internal microprocessor and utilizes mass flow controllers, which make gas mixture independent of temperature or gas pressure. Gas flow ranges from 100 ml to 20 L/min. Flow controllers' accuracy is 1% with repeatability of 0.2% full scale and require input gas pressures at 30 psi. Front panel gas flow meter (rotameter) confirms level of output gas mixture...
Read More »Pallet Truck handles up to 5,000 lbs.
BPT-50 Hand Pallet Truck features 8.5 in. raised fork height that is achieved with 10 full pump strokes. Heavy-duty, galvanized cast pump housing is protected from collision hazards, is corrosion resistant, and provides protection from dirt and water contamination. Three-position handle has no pinch points and features insulated foam grip. Reinforced forks are rounded to avoid damage to pallets...
Read More »Machining Center offers accuracy better than ISO 10791-4.
u-4800 HMC features 40 hp spindle able to accelerate from 0 to 15,000 rpm in 1.9 sec. Rapid traverse rates and max feed rate are 2,362 ipm with 1 G acceleration. Automatic Tool Changer produces 2.5 sec chip-to-chip tool change time. Two-pallet changer machine has 15.7 in. square pallet and pallet change time of 5 sec. X, Y, Z axis strokes are 22, 24.8, and 23.6 in. respectively.
Read More »