Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Megohm Meter features automatic key parameter calculations.
Fluke 1550B 5 kV MegOhmMeter(TM) combines insulation resistance testing up to 5,000 V with 99 measurement storage locations and PC interface software. Standard output voltages range from 250-5,000 V. Programmable test voltages are available in 50 V steps from 250-1,000 V and 10 volt steps from 1,000-5,000 V. Ramp function from 0-5,000 V dc is provided for breakdown testing. Meter is powered by...
Read More »Dual PMC Host Board suits intensive I/O applications.
Single-slot Model PP 310/01x supports 1.6 GHz IntelÃ-® Pentium M processor with up to 2 Gbytes 200 MHz DDR ECC SDRAM and 1 Mbyte high-speed L2 cache. It includes dual 64-bit PMC sites with front and rear I/O. Each site supports 3.3 or 5V PCI signaling and is available for user modules, standard PMC, or PrPMC modules. Board supports dual Gigabit Ethernet, PICMGÃ-® 2.16, PICMG 2.9, and...
Read More »
Hand Held Computer offers integrated RFID.
JETToce features MicrosoftÃ-® WindowsÃ-® CE .NET 4.2 operating system, IntelÃ-® XScale(TM) Technology processor, and integrated RFID reader. It can read and write to most 13.56 MHz RFID tags and smart labels. Various antenna positions may be selected for ease of use in multiple orientations. Customization options include case color, protective bumpers, keypad, logo tag, serial tag,...
Read More »SCSI Controller provides 1 or 2 independent channels.
PMC-based, single/dual channel Ultra160 SCSI controller, Model SC PMC/160 offers SCSI synchronous data transfer rates to 160 Mbytes/s. It features DMA FIFO and SCSI SCRIPTS(TM) processor with 8 Kbytes on-chip SCRIPTS storage. To maximize PCI bus transfer, PCI interface operates up to 64-bit/66 MHz, offering up to 528 Mbytes/s zero wait state data bursts. Controller includes SureLINK(TM) domain...
Read More »
Ethernet Switch features internal intelligence.
Five-port BusWorksÃ-® 900EN-S005 provides auto-negotiation of 10/100 Mbps data rate, full/half-duplex flow control, and crossover signal compatibility. Integrated 128 KB high-speed SRAM frame buffer is shared by all 5 ports and supports 1.4 Gbps memory bandwidth. Internal intelligence enables connect-and-go operation. Hardened for hostile environments, switch accepts 15-36 Vdc and operates...
Read More »
Brushless DC Servo Motors come in 22 and 36 mm frame sizes.
Based on 2 frame sizes, motors offer typical operating speeds from 2,000-8,000 rpm and continuous stall torques from 2-20 oz-in. Length of motor may be customized to meet unique requirements. For complete motion package, they can be supplied with 2,000 quad count optical encoder as well as optional Acme screw output.
Read More »Software translates CATIA files to and from Rhino.
CATIA v4 to Rhinoceros Translator will translate solid and surface models from CATIA v4 model and CATexp files to and from Rhino 3D. CATIA v4 solid entities translate to solid entities, and surfaces are translated to surfaces or poly surfaces. Plug-in application allows referencing of CATIA files within Rhino so that changes to base data can be reflected in Rhino design data. Translator also...
Read More »
IP Validation Station incorporates Altera Stratix FPGA.
Pathfinder(TM) IP Validation Station provides prototyping platform for embedded SoC designs or embedded IP blocks. It incorporates one Altera Stratix(TM) EP1S30 or EP1S80 FPGA and utilizes Aptix Expeditor(TM) Co-emulation technology. Product has capacity of up to 470,000 ASIC logic gates and 7.4 million bits of embedded RAM. Due to its 9.5 x 11.5 x 2.75 in. size and ability to connect to local...
Read More »
Lift Truck handles long loads.
Model C17000 reach truck has 17,000 lb capacity, runs on LP gas engine, and operates indoors or out. Four-way maneuverability permits load access in aisles as narrow as 8 ft. Operator compartment includes rubber-mounted half-cab with top, front, side, and rear glass. Hydrostatic drive and brakes provide precise speed control in confined spaces and high torque for semi-rough terrain, ramps, and...
Read More »
EDM Machines are available with 40-60 in. X-axis travels.
Beaumont Fast Hole Series 6-axis EDMs drill holes as small as .018 in. dia in high-strength-alloy parts. Available with 40 and 60 in. X-axis travels, FH40 and FH60 are VMC-style machines with Siemens encoder-equipped motors and drives for simultaneous 5-axis positioning of parts. Machines are equipped with 3,000 rpm spindle, 65 A power supply, and tool-change counter. Swiveling heads allow up to...
Read More »