Aprima Medical Software, Inc

Portable Magnifier enables inspection of conformal coatings.
Electronic Components & Devices

Portable Magnifier enables inspection of conformal coatings.

Equipped with 13 W UV-A black bulb that causes coatings to glow, handheld UV Portable Magnifier features 5-diopter, white crown glass lens with 2.25x magnification. Supplied with protective cover, lens measures 4 x 2.5 in. and provides rectangular viewing area. Plug-in ballast minimizes heat emission and produces flicker-free illumination. Magnifier is suited for inspection of welds, solder...

Read More »
Lubricants

Greases lubricate linear systems.

Constructed from compound of super-filtered synthetic lubricants, MSG#1 and MSG#2 optimize smoothness and dynamic life of anti-friction linear bearing and ball screw systems. MSG#1 ensures glassy-smooth, non-sticky feel at low speeds where very fine positioning is required, while MSG#2 features higher penetration number so that it will stay in place during high speed motion, but not so stiff that...

Read More »
Control Valves withstand temperatures from -60-
Fluid & Gas Flow Equipment

Control Valves withstand temperatures from -60-

Available in sizes DN15-DN150 and with pure graphite packing, 470 series of flow control valves is suitable for processes with high flow, where high-pressure drop, varying load, or high turndown is needed. It comes in SG iron or cast steel and can be fitted with range of electric and pneumatic actuators. Internal parts, stem, plug, and seat can be replaced independently or in situ. Series is used...

Read More »
Microcontrollers are optimized for embedded applications.
Agricultural & Farming Products

Microcontrollers are optimized for embedded applications.

Comprised of 9 models, 8-bit PIC18F97J60 series has on-chip Medium Access Controller (MAC) and Physical Layer Device (PHY). Integration of 10BASE-T Ethernet controller onto 10 MIPS PIC18 microcontroller with up to 128 KB Flash program memory provides single-chip remote-communication solution for various applications. Along with dedicated 8 KB Ethernet buffer, series comes with integrated IEEE...

Read More »
Cutting Lasers suit materials processing applications.
Electronic Components & Devices

Cutting Lasers suit materials processing applications.

Matrix(TM) infrared (1.06 micron) Q switched lasers, available with choice of air cooling or closed-loop water cooling, deliver 10 W of average power. While 10 kHz model is suited for engraving materials that are problematic for CO2 lasers, 30 kHz version is designed for trimming active and passive circuit components in microelectronics. Also available, 350 kHz version offers less than 1% rms...

Read More »
Plasma Cutter can be carried by shoulder strap.
Agricultural & Farming Products

Plasma Cutter can be carried by shoulder strap.

Able to connect to any 115-230 V, single-phase power supply, 100 A Spectrum 375 X-TREME(TM) provides cutting capacity of 3/8 in. on mild steel and Â-¼ in. on aluminum. Internal filter and factory-set regulator eliminate need for operator to adjust air pressure. Once connected to 90 psi minimum air compressor, cutter automatically regulates internal air pressure to torch. Auto-Line adjusts for...

Read More »
Laboratory and Research Supplies and Equipment

Torque/Angle Analyzer facilitates ISO 9001 documentation.

Offering EZ-Plug and Play as well as auto-recognition with Mountz transducers, hand-held PTT expedites process of setting up and running tool tests as well as transfer, analysis, and storage of test data for ISO/SPC documentation. LCD lets operator select desired filter, unit, mode, and set-up from and graphical menu. Torque controlling, monitoring, and documentation solution stores readings with...

Read More »
Agricultural & Farming Products

Inkjet Controller features expandable design.

Used with Drop-on-Demand(TM) printheads, I-Mark SX32 can produce graphics, logos, and datecodes from 0.09-5 in. high on porous and non-porous substrates. Icon-based user interface has password-protected user levels, graphics, date and time functions, counters, and integrated keyboard with hot keys for frequently used functions. Capable of controlling up to 4 printheads, SX32 is expandable and...

Read More »
Labels Tags Signage & Equipment

Labeling Solution meets retailer/DoD RFID requirements.

Scalable ItemSight(TM) software, bundled with scanner and optional label production systems, converts existing bar code container labels into labels that meet retailers' and Department of Defense (DoD) bar code and RFID product identification requirements. Label production options include AP5.4 and 64xx series printers and ALX print/apply systems. Using printer, Gen 2 RFID-enabled labels and bar...

Read More »
Wire EDM suits large part machining.

Wire EDM suits large part machining.

Measuring 100.4 x 128.7 x 101.0 in., ROBOFIL 640cc Wire EDM provides X, Y, Z axis travels of 31.5 x 21.7 x 19.7 in. With CC generator, machine achieves industrial cutting speed of 42 sq-in./hr in tool steel. Digital generator is zero voltage to protect parts against electrolytic effects. Providing max amplitude of 1,200 A, machine features Mechanical QuadraxÂ-® design for cutting angles up to...

Read More »

All Topics