JinkoSolar Holding Co., Ltd.
Shanghai 200122 CHN
Share:
IEF System facilitates sample loading.
Cup loading option for sample loading into rehydrated IPG (Immobilized pH gradient) strips is available for PROTEANÃ-® IEF (isoelectric focusing) System. Suitable for separation of proteins at extreme pH ranges, cup loading improves sample uptake into ReadyStrip(TM) IPG strips. Disposable cups are available in strips of 12 in either 100 or 150 microliter volume sizes. Adjustable electrodes...
Read More »
PC offers Intel(R) Pentium(R)III and dual display output.
Mini-Module Socket 370 CeleronÃ-®/based EBC-5610 embedded 8 x 5.75 in. board offers simultaneous CRT and flat panel (TFT and DSTN) display outputs. Other features include VIA Apollo Pro 133A system chipset, 10/100 Mbps Ethernet, AC97 audio, and TV Out function. Seven DMA channels and fifteen interrupt levels are built in as well. SMI Lynx3DM SM 721 chipset provides 128 bit GUI and 3D engine,...
Read More »
CNC Retrofit Package fits 3 axis milling machines.
PC-based Vega MLM-3A CNC has dynamic interpolator processor which creates true constant rate acceleration/deceleration. This allows parts to be cut at high feed rate while cutting smooth surface, which increases production. It has handwheel and pushbutton jog interfaces, manual tapping, programmable cycles, mirroring, scaling, and tool length and cutter diameter compensation. Retrofit package can...
Read More »Plastics Adhesive cures with heat or visible/UV light.
OPTOCAST AC-3801 one-component electronic grade, acrylate based formulation is room temperature stable and free radically initiated. Adhesive/sealant/encapsulant will adhere to polymeric and ceramic substrates when polymerized to flexible solid upon exposure to heat or UV and/or visible light in 320-520 nm range. Cured adhesive offers Shore D hardness of 40 to 45 and temperature range of -40 to...
Read More »
Converter covers DC to 80 MHz.
Model 12740-50-75 Coaxial to Triaxial Converter incorporates 9 converters into one module. It is designed for use in DC to 80 MHz (-3 dB) range with 75 ohm load. Unit includes adjustable gain and DC offset. It measures 3.25 in. high x .62 in. wide x 18.50 in. long.
Read More »
Impact Wrenches deliver up to 117 ft-lbs of torque.
14.4 Volt cordless impact wrenches produce up to 2500 impacts per minute with motor speed of 2200 rpm. They feature heavy-duty, die-cast aluminum gear housing. Compact,7.5 in. length allows for maneuverability in tight spaces. Model 9081-22 is 1/4 in. hex drive, 9082-22 is 3/8 in. square drive, and 9083-22 is 1/2 in. square drive. Kits include: tool, two 2.4 Amp-hr batteries, universal charger,...
Read More »
Oil Pumps dispense oil from 55 gallon drums.
Air operated oil pumps are available in 1:1 (Model 1735R), 3:1 (Models 1700R and 1702R), and 5:1 (Models 1730R and 1745) ratios. All pumps include air filters with automatic water drain and 2 in. NPT drum adapter. Heavy-duty, double action, manual pumps (Models 1208 and 1209) dispense 4 oz of fluid per stroke, feature adjustable levers for varying viscosities, and include drum cover, 5 ft output...
Read More »
Work Light is offered with 110 V in-line tap.
Impact-proof, UL Listed Handi-Light(TM), 13-Watt fluorescent work light, offers lamp life rated at 10,000 hours. Rough Service design includes break-resistant scratch guard; water- and dust-resistant under-the-handle on/off switch; printed circuit, solid state ballast; and rubber bumper and handle. Reflector design focuses light towards work surface and away from users' eyes. Lamp comes with 16-...
Read More »
DC/DC Converters operate from nominal 3.3 V source.
V7PC-10C series non-isolated, step-down DC/DC converters provide up to 10 A output current from 3.3 V bus input. Output voltages range from 2.5 to 1.0 V; efficiencies range up to 92% full load. Singe-in-line (SIP) converters with thermal management require less than 1 square in. of PCB space. Operate to 70Ã-
Read More »
Inert Tubing meets FDA and USP Class VI criteria.
TygonÃ-® Inert Tubing Formulation SE-200 contains inert FEP liner, which allows its use with aggressive chemicals. Combined with crystal clear, flexible Tygon jacket, it is suitable for applications where tight bends, clarity, and chemical resistance are required. Inert liner limits the potential of fluid contamination during transfer. Applications include pharmaceutical processing, ink and...
Read More »