EldoS Corporation

2nd Floor
London EC1V 4PY GBR

Smart Lift floats loads in assembly systems.

Computer-controlled iLift(TM) lifting and balancing system for assembly and material handling lets operators apply 2 lb of physical force to move 150-lb load at speeds up to 4.9 ft/sec. Float mode allows direct movement of loads without need to push buttons from central control position, thus shaving seconds from cycle times. In-line slide handle eliminates vertical overtravel. Lift can be...

Construction Equipment and Supplies

Plug End fits appliances and assembles easily.

Pre-molded 10-12 AWG Male Bridge provides three-prong plug end for large and small appliance power cords, power tool cords and extension cords. It allows 3 electrical terminals to be crimped at once on assembly line for fast loading of plug overmolds Bridge is available in black or natural nylon. Optional seven-shape blades have retention ledge to maintain firm position during plug molding.

Food Processing & Preparation

Vacuum Pumps are used for pick and place applications.

Fastbreak pre-assembled high speed blow-off vacuum pumps, levelers and cups are suitable for applications that require accurate part placement of irregularly shaped objects and/or rapid part release in dusty/dirty environments. Blow-off action continuously self-cleans vacuum lines to ensure positive release into nesting fixture for safe placement of parts. Applications include metal stamping,...

Thermal & Heating Equipment

Clean Process Oven is used for production environments.

Stackable LCC1-51 is programmable with microprocessor-based Protocol Plus controller and configured for 220/240 volts and 50/60 Hz. Non-corrosive, 5.1 cu ft stainless steel interior oven chamber handles 200 and 300 mm wafer processing applications. Continuously welded insulation side seams protect work chamber and product from contamination. Recirculated airflow is HEPA filtered, which is...

Cleaning Products & Equipment

UV Device cleans up Anthrax and other bacteria.

Handheld Bio Sweeper decontamination device is lethal to viruses, bacteria, and spores, including Anthrax. Device is easily moved in side-to-side or up-and-down motions over perceived or known contaminated objects whether they are mobile or fixed. Operator positions this device over any surface including electronics, walls, carpet, desktops, paper and other non-living materials to detoxify areas...

Test & Measurement

Ground Bond Tester displays data on graphic LCD.

HYAMP III model 3130 performs 4 common safety tests: ac Hipot, dc Hipot, insulation resistance and ground bond. Graphic LCD shows critical information so operators can see test data and Pass/Fail conditions. Unit provides up to 30 A of current continuous duty, has built-in test and dwell timer function, and built-in verification system. PLC control is provided via 9-pin D type connector.

Paddle Flow Switch resists corrosion and reacts to force.

SF Series has ABS housing for high corrosion resistance. Reactive force is induced in paddle in proportion to rate of flow in pipe, and reaction generates proportional resistance in control spring. Variable force balance is maintained between flow and control spring until flow exceeds set flow rate. When flow reaches set point, reaction plate activates micro-switch to make or break contacts.

Printing & Duplicating Equipment

Thermal Printer communicates via RF for portable printing.

Compact DPU-H245 has RF transceiver for wireless printing over range of 500-1500 ft indoors, 2 miles line of sight with omni-directional antenna, or 12 miles with directional antenna. It measures 135 x 100 x 36 mm. Rechargeable NiMH battery allows printing of 8,000 character lines on single charge. It supports condensed and enhanced fonts, has print resolution of 384 dots/line, and print speed of...

Fluid & Gas Flow Equipment

Butterfly Valves operate up to 200 psig.

Resilient seated butterfly valves offer phenolic backed cartridge seat to provide full rated dead-end service on all lug pattern valves. Torque values are minimized by use of 4 TeflonÃ-® bushings properly aligned down blowout proof shaft. Valves are manufactured with cast iron bodies; ductile iron nickel plated, aluminum bronze, or 316 SS discs; and Buna-N, EPDM, or Viton resilient seats....

Material Handling & Storage

Electric High Lift is available in 2 models.

Maxx-Jack Electric High Lift is capable of lifting skids, plastic pallets, wire baskets and containers with open bottoms. Unit includes 12 Volt electrical system with battery and charger. Push button lift and lower control is located in handle, and magnetic backed remote lift/lower control with 6 ft. cord is optional. Electric High Lift, with 2,200 lb capacity, includes automatic floor lock.