Gemalto
92447 FRA
Share:
Brazing/Soldering Machine is designed for small assemblies.
Rotary Index 100 is 36 in. wide by 48 in. deep and operates at rates between 100 and 200 parts per hour, depending on assembly mass and configuration. Brass, copper, steel, stainless, and aluminum can be joined on machine. Unit is equipped with clear, acrylic guarding on 3 sides. It requires 120 VAC, natural gas or propane, 80 psi air, water and drain.
Read More »
Case Sealer can convert to 2 in. or 3 in. tape requirements.
Little David Random Legend Series Case Sealer uses pressure sensitive tape to seal top and bottom of boxes. It tapes boxes ranging from 3 to 24 in. high, 4 1/2 to 22 in. wide, and from 3 in. in length. Side and lock leg extensions accommodate conveyor heights from 22 1/4 to 32 1/4 in. Sealed drive system and CaseLocker ST cartridge require no lubrication. Sealer features single mast design with...
Read More »
Torque Sensors are designed for low torque applications.
STS2220 rotary shaft torque sensors are available in capacities from 1.0 to 10.0 Nm. They feature one-piece outer housings and pre-lubricated bearings, and accept either AC or DC excitation voltage for compatibility to most readout instruments. Units have 1.5 mV/V nominal output at rated capacity, bridge resistance of 350 ohms, maximum speed of 10,000 rpm, and non-linearity of +/- 0.1% of full...
Read More »
Three-Chip Camera provides digital output.
IK-TU51 3 CCD camera provides 10-bit digital signal, eliminating need for frame grabber. It is suitable for machine vision, microscopy and broadcast applications. Camera has digital signal processors, RGB analog output, interchangeable 1/2 or 1/3 in. remote heads, broadcast-level resolution of 800 TVL, 6-vector color-enhancement circuitry, and pulse triggers. HAD CCDs improve camera sensitivity...
Read More »
Multiple Stage Valve is suitable for vacuum systems.
Compact ILP two-stage valve includes pneumatically-actuated poppet valve and bypass valve in single unit that fits into tight space constraints found in vacuum applications, such as loadlock and transfer chambers in semiconductor or optical processing. Soft start process reduces turbulent flow during initial vacuum system evacuation, for less product contamination and damage. Heater jacket is...
Read More »
Thermal Printers produce bar codes, text and graphics.
200 Series line of thermal/thermal-transfer printers handle pressure-sensitive labels and tags in sizes from 3.54 to 8.8 in. wide and 20.0 to 39.0 in. long. Print speeds range from 4 to 12 in./sec, with print resolutions of 203, 300, or 600 dpi. Labels may be printed one at a time, in strips, or in large batches. Optional feature rewinds labels inside unit in preparation for automatic...
Read More »
Fluid Bed Drying System recycles exhaust air.
Drying system recycles 75% of heated exhaust air through continuous pulse jet dust collector and reheats it in natural gas burner, during drying of rice, salt, limestone, sawdust, polymers, inorganic chemicals and other products that require temperatures of 150+ Ã-ºF. System permits process to operate at high outlet moisture while staying comfortably above dew point of final exhaust air.
Read More »Rotary Torque Sensors eliminate need for slip ring.
Model 01279 line of rotary torque sensors use non-contact infrared digital signal transmission, eliminating maintenance and wear problems of conventional slip ring technology. Sensors have high level analog output to represent torque load. They can be used as drop in replacements for many existing rotary torque sensors.
Read More »CAD Applications create 3D models.
Cadsoft Build v6.0 stand-alone application utilizes Autodesk's AutoCAD software as its core. Its engine is based on AutoCAD 2000I platform to ensure file compatibility with Autodesk 2000-2002 product line. APDesign v11.0 add-on for AutoCAD is compatible with AutoCAD releases 2000, 2000i and 2002. Shared features include real-time motion, auto-coloring, building location access controls,...
Read More »Information Control Software has Windows XP/Ole functions.
ProDocTivity 7.0 manufacturing information control system streamlines documentation processes. It features documentation revision control, management approvals using e-mail functions, concurrent multi-revision documents, and printing capabilities. Its user interface offers configurations for work center use and job scheduling, as well as configurations for document management and organization....
Read More »