Gemalto
92447 FRA
Share:
Tractor Loader Backhoe has 25 hp diesel engine.
Compact TLB-425 has Kubota D1105 diesel engine, servo-controlled hydrostatic transmission, and backhoe that delivers 4,611 lb digging force and can reach 9 ft 6 in. digging depth. Servo control allows operator control of machine with reduced pedal effort in forward or reverse travel mode. Loader bucket has max lift capacity of 2,100 lb, 3,400-lb breakout force, and max loading height of 90 in....
Read More »
Ionizing Bar works up to 12 in away.
ION Transport Long Distance Static Neutralizing Bar is suitable for applications where static neutralizing bars are required, but can not be located within 1 in. of ionization. Applications include bag making machines (wicketeer), Center and Surface slitter rewinds, web presses unwind and rewind, silk screening, sheeters, and newspaper presses folding area.
Read More »Pressure Transducers withstand electromagnetic noise.
P321 OEM differential pressure transducers, available with pressure ranges from 0-5 PSI to 0-50 PSI (with 60 PSI operating line pressure), operate on 5 Vdc power supply, and provide 0.5 to 4.5 Vdc output. Housings are compatible with various liquids and gases, and may be specified with or without bracket assembly. Sensing technologies are repeatable, stable, and accurate, and are designed to...
Read More »
High-Resolution Lens works with 3-million pixel cameras.
Model 26HA 2/3 in. 25mm F/1.4 lens has more than 2,640 TV Lines in center and more than 2,110 TV Lines at edges, making it suitable for use with 3-million pixel CCD machine vision cameras. Distortion compensation ensures high resolution from corner to corner even at minimum focusing distance of 0.6m. F/1.4 aperture allows use in situations that require low light, and 25mm focal length is used for...
Read More »
Machine Vision Lenses fit 1.3 megapixel cameras.
Megapixel Lenses, for 2/3 in. CCD image format, are available in 3 focal lengths: 16mm F/1.4, 25mm F/1.4 and 50mm F/2.8. 25 and 50 mm lenses have 0% distortion, providing optical performance from corner to corner, and making them suitable for machine vision applications where close inspection of small objects is needed. Lenses have locking screws for focus and iris adjustments, important when...
Read More »
35mm Lens fits CCD machine vision cameras.
Model 23FM35L 35mm F/2.1 machine vision lens fits mid-range applications between 25mm wide-angle and 50 mm telephoto lenses. It has 30.5mm dia and filter size of 25.5mm. Distortion compensation ensures high resolution from corner to corner even at close minimum focusing distance of 0.3m. Locking mechanisms on focus and iris make it suitable for use in places with significant vibrations.
Read More »Controller Board suits PC/104-based microcomputer systems.
PCMCIA Dual Interface board adds PC card I/O functionality to PC/104 system. Featuring Intel(R) PD6722 chip, module is fully PC/104 form-factor compliant, and available with either 2 front-, right- or left-loading PCMCIA disk drives. It supports all Type I, II, and III PCMCIA memory; I/O; and ATA hard disk cards, which can support transfer of data and sharing of peripheral devices between...
Read More »
Spectroscopy System aids in biology and materials research.
MultiMode(TM) PicoForce(TM) Scanning Probe Microscope (SPM) Control System, combined with software developed for force spectroscopy, enables force measurements and manipulation of biological or material samples at pico-Newton level. System utilizes atomic force microscope, scanner with closed-loop control of Z-axis that controls tip-sample separation, software GUI, and handheld tool with...
Read More »
Motor Starters are rated for hazardous locations.
Nelson combination starters are designed for starting and stopping single-speed, non-reversing squirrel cage motors at full voltage, utilizing either automatic or manual control. They protect against dangerous short circuits, while also serving as disconnect. Starters are built from copper-free cast aluminum with corrosion-resistant gray vinyl finish, and stainless steel cover bolts with captive...
Read More »
Programming Port provides access in hazardous areas.
Graceport M7 Series Div 1 hazardous location interface eliminates need to remove all bolts from NEMA 7-9 enclosure to gain programming access to devices inside. Instead, interface is installed with conduit connection to nearby NEMA 7-9 enclosure containing programmable device. Personnel obtain hot work permit and perform sniff test before programming.
Read More »