Gemalto
92447 FRA
Share:
Microwave Amplifier provides low harmonic content.
Model 10ST1G18 broadband hybrid solid state and traveling wave tube microwave amplifier delivers 10 W minimum at amplifier output connector. Instantaneous frequency range is from 0.8-18 GHz in 4 sub-bands. Self-contained, air-cooled unit has built-in IEEE-488 interface, 0 dBm input, gain control, RF output sample port, and VSWR protection for TWT. It provides monitoring of TWT helix current,...
Read More »Rewinder operates at 2,000 fpm.
Model AFR-18 high speed aluminum foil and food film rewinder is infinitely adjustable from 16 to 500 ft lengths. It handles both 12 and 18 in. foil widths and allows core OD sizes of 1.25 to 1.75 in.
Read More »Epoxy is formulated for extended pot life.
OPTOCAST 3410 GEN 2 ultraviolet light and/or heat curable epoxy is suitable for opto-electronic assembly. It cures rapidly when exposed to UV light in 320-380 nm range with low shrinkage. Maximum ionic content is 10 ppm total Na+, K+, and Cl-. Epoxy is ideal for fixturing and aligning optical devices with less than 1 -µ movement throughout its service life. Working life at room temperature is...
Read More »
Rotary Tables provide 5-axis capabilities.
Models TR160, TR210, and TR310 are 160, 210, and 310 mm rotary tables, with capacities of 80, 200, and 500 lbs, respectively. Dual-axis trunnions bolt directly to table of 3-axis VMC to provide 5-axis motion or to position parts to nearly any angle for multi-sided machining. All three tables are driven by brushless servo motors on both axes, and provide Ã-
Read More »Microcontrollers offer quick start-up of 2 microseconds.
Models PIC16F630 and PIC16F676 14-pin PICmicro Flash microcontrollers feature analog-to-digital converter and internal oscillator. PMOS Electrically Erasable Cell process technology provides erase/write endurance, retention, and disturb reliability for program and on-chip data EEPROM memory. Typical standby current is 100 nA at 2.0 V, and operating voltage is 2-5.5 V. Units offer 1792 Kbytes of...
Read More »Lubricant reduces need for operational shutdowns.
Non-asphaltic Polyguard 4100 synthetic open gear lubricant reduces downtime and scheduled maintenance when performing ore mining and ball milling at extreme temperatures. Product allows for rapid set-up on gear teeth helping to prevent metal loss and reduces volatile organic carbon (VOC) emissions. Transparent amber color makes clean up, inspection, and maintenance simple.
Read More »
Optical Receivers improve link sensitivity by 3 dB or more.
Models DSCR405 and DSCR405ER are 15 dB InGaAs balanced photoreceivers for wavelengths from 800 to 1,650 nm with over 14 and 20 GHz bandwidths, respectively. They are targeted at digital telecommunications markets using 10 and 20 Gbps with FEC and RZ formats. Units feature small form-factor fiber-pigtailed package that is hermetically sealed and built to GR-468 standards.
Read More »
Packaging System manufactures paper cushioning on site.
FASTTrack Benchmate System crumples and cuts kraft paper at speeds up to 270 fpm. It is available either mounted on sturdy worktable or steel-frame stand, and can be used on high-speed conveyor pack lines or in off-line packing operations. Using 40 lb rolls of 100% recycled Kraft paper, Benchmate machine averages 80 cu ft of packing material per roll.
Read More »
Standoffs are used with PC/104 and PC/104-Plus modules.
Standoffs overcome space limitations that occur when PC/104 or PC/104-Plus Bus drives are installed. They are available in nickel plated brass (Part 8799) and nylon (Part 4799). Each PC/104 and PC/104-Plus module is a self-stacking pin and socket bus that eliminates bulk of backplanes and card cages. Computer power supplies and multi-board stacks are typical end-uses of modules and require...
Read More »
Racks and Consoles are seismically qualified.
Custom 19 in. cabinets can be designed with single bay, 2-bay, 3-bay, or 4-bay configurations. Racks and consoles have front to back adjustable EIA rails or frame integrated mounting hole patterns. Vertical heights and depths are modified to customer specifications. Structures of cabinets are seismically qualified by Finite Element Analysis that permits computer based simulation and analysis of...
Read More »