Gemalto
92447 FRA
Share:
Stop Sign is made of corrugated polypropylene.
Flashing or steady-on, bi-directional BT1O-SS-RT signaling and warning device features 1 in. wide strips of 3M red reflective tape on top and bottom of both sides of sign. Hand-held, battery powered stop sign baton has 10 LED lights that can be seen up to 1/2 mile away from both sides of sign. This 18 in. octagon shaped, weather proof signaling device is 1.72 lbs and provides over 300 hours of...
Read More »
Refractometer provides digital refractive index readings.
Portable, battery-operated digital refractometer with digital display and splash-resistant housing provides accurate readings of sugar concentrations (Brix) or refractive index in plant, field, or lab. HR200 refractometer is available in 4 models with different measurement ranges - 0 to 36%(1.3330 to 1.3903 nD), 0 to 45%(1.3330 to 1.4098 nD), 28 to 65%(1.3800 to 1.4535 nD) and 60 to 92%(1.4400 to...
Read More »
Ball Transfers suit air cargo industry applications.
Heavy Duty Units are constructed with hardened bright zinc-plated mild steel body, stainless steel 30 and 45 mm load balls, stainless steel minor balls, and multi-hole stainless steel drain base. Flange Fixing flying saucer units have ball diameters from 25 to 50 mm and load ratings from 120 to 750 lbs. Euro Units have ball dia from 15 to 45 mm and load ratings from 110 to 1,014 lbs....
Read More »
Rider Sweeper/Scrubber is configurable to individual needs..
Model SC7750 removes dirt, grease, grime, and loose debris without need for separate sweeper. Sweeping system, independent from scrubbing process, has steel hopper that can reach containers as high as 60 in. for dumping as much as 10 ftÃ-³ of debris. Offered with 46 or 53 in. cleaning path, unit offers 70 gallon solution and recovery tanks. Additional offerings include hydraulic drive, power...
Read More »
Cleaner removes stains from concrete or asphalt.
PaveCleanÃ-® removes oil stains from concrete without using water or harsh chemicals, eliminating contaminated storm water runoff associated with pressure washing. It also removes surface sheen and slipperiness from stained concrete or asphalt, helping to reduce slips and falls. Pave CleanÃ-® is packaged in 1, 5 and 20 lb containers providing enough product to clean from 120, 600 or 2,200...
Read More »
Level Transmitter offers 4-20 mA or 0-5 Vdc outputs.
Model CS001 RF Capacitance Level Transmitter provides linear level measurement in extreme process temperatures and fluid conditions. It features fully programmable 4-button calibration for specific medias and is available in NEMA 4 (IP65), or explosion-proof housing. Probe is 316L stainless steel, comes in lengths up to 120 in., and contains Teflon encapsulated electrode. Applications include...
Read More »
Standard Motors are upgraded to Inverter/Vector duty designs.
Inverter/Vector Duty Motors conform to NEMA MG-1-1998 Section 31.4.4.2, and include Class H magnetic wire insulation and IP55 enclosure protection. At speed range of 5:1, they offer constant torque from 60 to 12 Hz. At speed range of 20:1, constant torque ranges from 80 to 4 Hz. Totally Enclosed Fan Cooled motors are UL recognized, CSA approved, and European Union CE Certified. They are designed...
Read More »
Gas Detector monitors 40+ gases, including H2S.
UniTox(TM) has sensors that employ universal transmitters, which are compatible with sensor modules for monitoring various gases. Loop-powered universal transmitter, combined with sensor modules specific to different toxic gases, allows for field conversion to any gas type or range required. UniTox(TM) includes intrinsically safe electronics with on-board microprocessor. Capabilities include...
Read More »
Turning Center offers spindle speed to 6,000 rpm.
Quick Turn (QT) Nexus 100 provides 6 in. chuck, 15-hp motor, and 12-tool drum turret with 0.18 sec. turret indexing time. It is capable of handling heavy-duty cutting at low speeds as well as high-speed turning of nonferrous materials. Programmable NC electric tailstock, driven by servo motor, does not require manual adjustment. Unit's Tool Eye automatic presetting arm automatically performs...
Read More »
Vertical Machining Center has chip-to-chip time of 2.9 sec.
Driven by 25-hp spindle motor, Nexus 410A reaches max spindle speed of 12,000 rpm. Vertical Machining Center provides high-speed, rapid traverse rate of 1,417 ipm @ 0.5 G acceleration. Unit also provides machining area with X, Y, and Z-axis travels of 22, 16, and 20 in., respectively. Table size is 35.4 x 16.1 in., with load capacity of 1,100 lbs. Tool magazine can store up to 30 tools (of 40...
Read More »