VeriFone Holdings, Inc.
Paris 75010 FRA
Share:
Digital I/O Board plugs into PC/104 slot or stack.
Model 104-IIRO-16 32-channel board provides change-of-state detection, 60 V optical isolation on input lines, and standard Form C SPDT relay outputs. Isolated, non-polarized inputs may be driven by dc sources of 3-30 V or ac sources at frequencies of 45 Hz to 10 kHz. The 16 input channels are available via 34-pin header, while relay outputs are available via 50-pin IDC type header. Board is...
Read More »
Drive Belt provides extended wear.
Drive belt cuts required belt changes in half and is used on line-shaft roller conveyors made by Hytrol, Ermanco, Bushman, Rapistan, and Matthews. It is constructed from 45D Shore Hardness, polyester-based polyurethane with internal lubricant package.
Read More »
Rope Mouldings are suitable for use as trim and borders.
Half-round and full-round rope mouldings include MDF and flexible formats. Able to be stained or painted, they are suitable for use as ornamentation or tack on mouldings for borders on cabinets as well as furniture, door, and window trim. Mouldings are offered in Maple, Oak, Poplar, Cherry, and Flexible formats in 8 ft lengths or in MDF from 6 to 12 ft lengths. Both offer thicknesses from 3/8 to...
Read More »
Transducer provides interface to process controllers.
EU2B5303 Current to Voltage Transducer converts primary current (up to 200 A, 50-400 Hz) to programmable 0-10 Vac control of instrument voltage. It isolates current to be measured from monitoring or control systems and provides interface to process controllers, alarms, and data acquisition systems such as PLCs. Toroidally wound transformer has 0.7 in. ID and 2 in. OD. It is coated with Bicroflex...
Read More »
LEDs replace incandescent lamps in elevator applications.
LED lamps are plug-compatible with illuminated switches and indicators. They are offered in single- and multi-chip types to provide continuous light even if one or more emitters fail. Elevator LEDs are available in green (10,000 mcd), white (6,000 mcd), blue (3,000 mcd), yellow (7,000 mcd), red (3,500 mcd), and orange (6,500 mcd). Producing little or no heat, lamps offer built-in,...
Read More »
USB Serial Converters suit scientific laboratory research.
Serial converter models NI USB-232 and NI USB-485 allow engineers and scientists to connect to existing serial instruments using USB technology. NI USB-232 converters use RS-232 Serial protocol, while NI USB-485 models use RS-485 or RS-422 serial protocols. Both converters are available in 2- or 4-port configurations. Data throughput rates are rated to 230.4 kb/s (NI USB-232) and 460.8 kb/s (NI...
Read More »
Workstation promotes teamwork and efficiency.
Quad Station keeps all members of work cell or team in close proximity, while providing personal space. Station configuration minimizes material handling and organizes tools, parts, and components operators need to complete production tasks. Each section is height adjustable from 30 to 36 in., and each worksurface supports up to 750 lb. Station is constructed of 12 and 14 ga steel with...
Read More »
Checkweigher Systems also detect metal.
Metal Detector/In-Motion Checkweighers combine company's E-Z TecÃ-® Metal Detection technology with Thompson Scale Company's checkweighers. Models TSC 350, Sonic 350, 4693, and 4693i cover capacities from 0.002 to 200 lb with speeds from 40 to 350 units per min. Conveyors are available in stainless steel, painted mild steel or, for harsh environments, can be painted with a corrosion resistant...
Read More »
Disc Varistors provide surge protection.
NVD series metal oxide disc type varistors withstand surge currents and suppress transient voltages. Varistors are non-polarized and available in sizes of 5, 7, 10, 14, and 20 mm dia. Maximum allowable voltages are 14 to 1000 Vac and 18 to 1465 Vdc. Maximum peak current ratings are 125 to 7000 A and capacitance ratings are 70 to 10,000 pF. Varistors feature UL94V-0 rated flame-retardant coating...
Read More »
Level Sensor works where other sensors fail.
Phase TrackerÃ-® uses an electromagnetic field that senses mass of material in 6 in. diameter area around sensor. It is not affected by signals reflecting off tank sidewalls, cannot be blinded by dust, and can reliably measure product when cross members and irregular structures are present. It works in dust, foam, non-air vapor, fumes, changing and low dielectric constants, abrasives and...
Read More »