VeriFone Holdings, Inc.
Paris 75010 FRA
Share:
Milling Spindle works with 5-axis machining centers.
Water-cooled MFW-2310/24 has 230 mm dia and uses hybrid (steel races with ceramic CERBECÃ-® balls) angular contact bearings. Rated for constant torque of 62 Nm up to 10,800 min-1, it features HSK-A63 tool clamping system with rotary union that allows cooling through tool. Tools with diameters from 20-50 mm and cutting speeds to 4,000 m/min can be used. Spindle is designed for machining...
Read More »
Communication Analyzer offers 105 MS/sec sampling rate.
CompuScope 14105 digitizer for PCI platform provides 2 simultaneous input channels, 14 bits of vertical resolution, and 250+ MHz of bandwidth. Single input range of 0.5 VRMS is coupled to transformer with 50 Ohm impedance, and typical accuracy is Ã-
Read More »Op Amps offer video amplification and switching.
Available in SOT23/5L, TSSOP8, and SO-8 packages, TSH8x series op amps offer negative input rail combined with rail-to-rail output stage. Models TSH80, TSH81, and TSH82 are single, single with stand-by, and dual-voltage feedback op amps, respectively. Each features gain/bandwidth product of 100 MHz, slew rate of 100 V/Ã-µsec, and output stage optimized for driving 150 ohm load. Total harmonic...
Read More »
Power Interface Board has 6U form factor.
Able to interface to power section of backplane via power bugs with 6/32 screws, 6U PIB comes in versions containing one or two 47-pin hot pluggable power supply connectors. Power taps are provided for +5 V, 3.3 V, -12 V, +12 V, and GND. Features include header for voltage sense and current sharing, IPMB interface, ATX power connector, auxiliary/disk drive connector, and power switch header.
Read More »
Connector has a mechanical push-pull design latch.
SC type optical fiber connector provides audible sound when properly mated and keying that prevents rotational misalignment. Product is offered pre-assembled, with 2.50 mm Zirconia ferrule, in singlemode or multimode versions. Max insertion loss ranges from 0.3-0.5 dB with respective min return loss of 22-40 dB. It supports 0.9, 2, and 3 mm cable types. Connectors conform to JISC5973 and...
Read More »
Analyzer detects hydrogen sulfide from 0-100 ppm.
Model 4400 In-Stream Analyzer continuously verifies Hydrogen Sulfide content of natural gas streams to help guard against corrosive effects of H2S on compressors, pipelines, and process equipment. There are no tapes to replace, no conditioning solutions, no mechanical stream blenders to calibrate, and no hazardous material to dispose. Calibration requires only external application of span gas and...
Read More »
Compressed Air Dryer provides continuous operation.
Scalable, modular Model MVP-HD removes moisture at point-of-use. It is based on technology that uses molecular sieve in desiccant cartridge. Each cartridge alternates between cycle of air-drying and regeneration. Desiccant life is indefinite and replacement is only necessary should it become contaminated.
Read More »Condensate Recovery System handles temperatures to 392-
Available in cast iron or cast steel, GP14 PowerTrap(TM) pumps high-temperature condensate for vented receivers, sumps, and other pump applications. Non-electric design ensures no cavitation or seal leakage, and externally removable motive medium intake valve is protected by internal screen. Able to handle temperatures to 392Ã-
Read More »Mid-Range Cartoners are offered with 9 or 12 in. centers.
Meridian cartoners employ metric, multi-purpose design and are available in right and left hand configurations. Overall base frame does not exceed 16 ft in length for either center configuration. Featuring smooth rotary feed, cartoners reach speeds from 160-200 cpm and handle carton sizes from 4-8 or 11 x Ã-½-6 x 4.5-12 in., depending on center size. Machines are available with 2, 3, or 4...
Read More »
Pneumatic Torque Wrench features 2 in. dia gearbox.
Pneutorque Model PT52 offers torque capacity of 205 lb-ft with max speed of 125 rpm or 123 lb-ft with max speed of 200 rpm. Basic stall tool employs inlet air pressure to control torque, while electronic shutoff version includes torque transducer, torque display, and internal solenoid valve. Suited for valve and pipe work and maintenance and assembly applications, wrench provides smooth,...
Read More »