Acunetix
Portomaso PTM 01 MLT
Share:
Vertical Machining Center operates at 10,000 rpm.
Model VX650 offers X, Y, Z travels of 55, 26, and 25 in. with rapid traverses of 1,575, 1,575, and 1,181 ipm. Four-slideway structure in Y axis provides stability for heavy duty machining. Available with BT or CAT 40 tool shank, machine includes 20-tool ATC, centralized Fanuc 0IMB controller, and 63 x 25.6 in. table with load capacity of 2,866 lb.
Read More »
Drilling/Tapping Center offers face and end milling.
Featuring 23.6 x 15 in. table, Model VX380T offers X, Y, Z travels of 20, 15, and 13.8 in., and produces 1G acceleration with rapid traverse of 56 m/min. Slanted bed construction facilitates chip and coolant disposal at side of machine. Spindle designed for tapping features direct connection to 10 hp motor to maintain stability at high speeds. Capable of producing parts at 12,000 rpm, machine...
Read More »
Multi-Tasking Turning Center can finish part in one setup.
Combining turning and milling functions on 4 axes, Model SKT2500MT features symmetrical head stock with built-in 30 hp spindle motor, which helps prevent heat generation. It includes 22-tool high-speed ATC and Fanuc 18ITB control with 320 m memory. For manufacturing complicated parts, tool head with contouring B-axis offers 0.001Ã-
Read More »
Turning Center features 30 hp spindle motor.
Equipped with base mounted tooling system, Model SKT 250MS offers maximum swing of 24.4 in., 15.9 in. turning diameter, and X, Z, B axis traverses of 11.4, 29.5, and 27.6 in., respectively. Main spindle features max speed of 3,500 rpm, while sub-spindle with 8 in. chuck operates at 4,000 rpm. Three-piece coupling enables heavy cutting as well as milling. Offering 0.001Ã-
Read More »
Horizontal Machining Center provides high speeds.
With rapid traverse rate of 1,969 ipm, HX630 combines max work area of 39.37 high x 36.6 in dia with respective X, Y, and Z traverses of 41.3, 34.4, and 34.4 in. Machine has cutting feed rate of 1,969 ipm and spindle speed of 8,000 rpm. Standard configuration includes Fanuc 18iMB controller. Wedge-type mechanism produces 4,630 lb of pull stud retention force, while CAM-type ATC system minimizes...
Read More »
Horizontal Machining Center is driven by 2-step gearhead.
Model HX400 employs rotary-type auto pallet changer and fixed-address ATC that holds 40 tools. Tool change takes 1.3 sec, and balanced spindle structure, supported by rugged box-way design, enables machine to obtain stable accuracy during heavy-duty machining. Features include dual internal screw conveyors, idle station that rotates freely with pin-lock cylinder at 90Ã-
Read More »
Vertical Machining Center provides high productivity.
Hi-Center V50D features traveling column design and centralized chip collection. Fanuc Series 0iMA controller has 8.4 in. color LCD, 2,100 ft memory, and preview control with 15-block look ahead. Quick pallet change and rapid traverse rates of 1,575 ipm minimize non-cut time, while 20 hp spindle motor generates 211.2 lb-ft torque at 8,000 rpm. APC design is such that only rotary motion of table...
Read More »
Rotary-Screw Compressor facilitates maintenance.
Available in 20, 25, and 30 hp models, Series AS features Sigma Profile(TM) airend and delivers flows of 59-124 cfm and pressures of 80-217 psig. Split cooling airflow design reduces noise levels, while space-saving cabinet provides access to service points. Features include automatic belt tension and quick fluid change devices. Integral dryer and condensate drain are available for 20 and 25 hp...
Read More »
Compressor is designed for efficiency and flexibility.
Providing pressures from 80-217 psig, Sigma Frequency Control (SFC) compressor is available from 25-335 hp with flows from 22-1,568 cfm. Variable-speed drive compressor employs direct-coupled airend/motor combination and allows for operation from 100% down to 20% load. Compressor package includes soundproofed enclosure, EPA-compliant TEFC motor, and proprietary Sigma Control system. Select models...
Read More »Machining Center offers automatic operation.
Designed for work pieces up to 20 mm in dia, NN-20YB employs main spindle powered by 5 hp motor that delivers speeds from 300-10,000 rpm, and 3 hp back spindle that ensures precision cutting. Main tool post features 6 turning tools, 7 spindle tools operating at 2 hp, and 4 frontal drills, while back tool post accommodates 2 turning tools, 2 live spindles operating at 2 hp, and 3 frontal drills....
Read More »