Acunetix
Portomaso PTM 01 MLT
Share:
Dual Type III Mini-PCI Adapter works with PC/104-PLUS bus.
Model 4167 allows use of 2 mini-PCI cards, such as IEEE 802.11 wireless LAN cards, in PC/104-PLUS (PCI-only) system. It uses PCI bus bridge, so only one PC/104-PLUS slot is required. PCI bridge also isolates mini-PCI cards from system, allowing mini-PCI cards to be used in systems with 5 V busses. On-card jumpers are used to select which PC104-PLUS slot the adapter occupies, and status LEDs are...
Read More »
Subminiature Switches suit logic level applications.
Washable A switches incorporate Sliding Twin Crossbar mechanism and have sealed bodies that withstand automated soldering and cleaning techniques. Toggles and rockers are available in single- and double-pole models with momentary and maintained actions, while pushbuttons are offered in single- and double-pole momentary circuits. Offered in single- and double-pole maintained circuits,...
Read More »
Portable Pump System handles corrosive and toxic chemicals.
Flex-i-CartÃ-® consists of Flex-i-linerÃ-® sealless, peristaltic type, rotary pump furnished with UHMW polyethylene, polypropylene, or TeflonÃ-® body blocks, and 1 of 7 different elastomeric linings. Pump and motor assembly is mounted on rubber-wheeled dolly, along with quick disconnect suction and discharge hoses. Able to handle acids, caustics, solvents, and chlorides, system offers...
Read More »
Digital Oscilloscope Adapter samples at 1 MS/sec.
Powered from USB port, dual-channel Stingray(TM) combines functions of oscilloscope, data logger, spectrum analyzer, volt meter, frequency meter, and signal generator in single device. It features simultaneous 12-bit sampling on both channels and 32 kbytes of sample buffer with hardware triggering, including delayed time base and pulse width. Stingray includes EasyScope II oscilloscope software...
Read More »
Five-Axis Machine meets automated production demands.
High-speed Model UCP 600 Vario features modular tool changer that can hold 100-220 tools. With 7-position pallet changing system, workpieces with surface area up to 13 x 13 in., height of 14 in., and max weight of 176 lb can be automatically changed and simultaneously machined. Available with 12,000, 20,000, or 42,000 spindle options, machining center includes rotary/tilt table that swivels...
Read More »
Software bridges gap between CAM systems and HSMs.
Intended for 5-axis machines, CAMplete TruePath(TM) presents tool path data in 3D view, graphical view, tabular posted view, tabular un-posted view, and tree view. Simulation and analysis tools are linked directly to tool path editor so users can immediately see effects of tool path changes. With NC format editor, users can create/edit unlimited G-Code formats and apply them to tool path being...
Read More »
Alarm Control Panel features LCD keypad.
Series 7000 keypad provides 4 onboard fully programmable zones,integrated proximity reader, door access relay, and codeless arming and disarming. LCD display delivers sharp, clear text feedback for proper system operation. A digital interface is provided for applications of all sizes. Unit adapts to company's standard backbox for upgrading.
Read More »
Vertical Machining Center features linear motors.
Model VL30-5X uses linear motors, rather than ballscrews, for increased acceleration and deceleration rates and overall contouring accuracy. It offers cutting feed rate up to 1,574 ipm with 1G acceleration/deceleration rate. X, Y, Z axes range is 200 x 300 x 200 mm. Up to 50,000 rpm spindles are offered. Machine provides 50 rpm in A-axis and 100 rpm in B-axis.
Read More »
Horizontal Machining Center allows feeds up to 48 m/min.
Targeted at high precision job shops, Model HW63A provides X, Y, Z axes envelope of 1000 x 800 x 800 mm and 40/30 hp spindle with 6,000 rpm. Glass scale feedback systems offer 0.001 mm resolution. Three-point leveling cast iron bed provides stiffness and rigidity, and dual ballscrews provide improved motion control and high axis thrust. Steel box slide ways feature G-II lubrication system that...
Read More »
Hydrogenated NBR Compound suits automotive applications.
Hydrogenated Nitrile (HNBR) elastomer compounds are used for leak-free seals, gaskets, and hoses where resistance to aggressive chemicals and extreme temperatures is required. HNBR covering compound can reduce noise originating from chain adjuster, where chain wheels can reach temperatures of 170Ã-ºC.
Read More »