E Instruments Group LLC
Langhorne, PA 19047
Nov 06, 2009 IP54 dust protected, hand-held AQ100 indoor air quality monitor with CO2 temperature probe incorporates sensor that detects CO2 0-5,000 ppm range, at 1 ppm resolution, in ambient temperature range of -4 to 176°F. Device features ABS shock-proof housing, 2 line LCD display, and min/max/hold unit selections.

AVL North America, Inc.
Plymouth, MI 48170
Nov 04, 2009 Consisting of partial-flow dilution system that measures particulate pollution, Smart Sampler 478 offers global tool for certification of diesel engines. Dual-cabinet design can be split in 2 sections, permitting user to keep one section close to engine and another in remote location. CFR1065 compliant for steady state and transient tests, portable Smart Sampler 478 provides continuous monitoring of progress throughout test and notifies user of potential problems.

E Instruments Group LLC
Langhorne, PA 19047
Nov 04, 2009 Portable AMI300 supports various interchangeable probes and modules to accommodate any indoor air quality (IAQ) application. In addition to CO/temp and CO2/temp probes with 1 ppm resolution and respective ranges of 0-1,000 and 0-5,000 ppm, multifunctional unit operates with probes for CO2/temp/humidity, air flow (vane and hot wire), and air velocity. Current/voltage and thermocouple modules are also included, along with tachometer, LCD, and IP54-rated ABS shock-proof housing.

E Instruments Group LLC
Langhorne, PA 19047
Nov 03, 2009 Featuring ABS shock-proof housing with IP54 dust protection, Model AQ200 includes CO2 sensor measuring 0-5,000 ppm and CO sensor measuring 0-1,000 ppm. Multifunctional unit also measures temperature, atmospheric air pressure, and humidity. Equipped with 2-line ICE BLUE LCD display, tester provides Min/Max/Hold/Unit Selection, 8,000 memory points, and wireless communication.

Analytical Technology, Inc.
Oaks, PA 19426
Oct 29, 2009 Used for online measurement of peracetic acid (PAA) residuals in disinfection systems, Q45/85 Peracetic Acid Monitor uses membrane-covered polarographic sensor that does not require addition of chemical reagents. It provides real-time measurement of low levels of PAA in solution. Available in flowcell or submersion configurations, device is offered in AC-powered analyzer, loop-powered transmitter, or battery-operated portable versions.

INFICON
East Syracuse, NY 13057 9714
Oct 16, 2009 Providing continuous, unattended remote monitoring of water or air, CMS5000 uses gas chromatograph technology to analyze and quantify VOCs and toxic industrial chemicals on-site for accurate results. Sample collection and analysis sequence is managed through programmable CMS IQ software utilizing on-board default methods. Data can be uploaded to any location via FTP automatically after every run, and user can remotely access system to view data.

RAE Systems
San Jose, CA 95134
Oct 16, 2009 Packaged in weather-resistant, stainless steel housing, AreaRAE Inert features built-in pump with ability to monitor inert atmosphere using up to 100 ft of sample draw tubing, allowing unit to remain outside of work area and in radio contact with breathing air services and safety managers. Detector may be equipped with up to 5 sensors as application or worksite demands. Wireless range is up to 2 miles and data can be re-transmitted over Internet for remote monitoring and evaluation.

RKI Instruments, Inc.
Union City, CA 94587
Sep 25, 2009 Weighing 4.6 oz, 2.75 x 2.95 .98 in. GX-2009 simultaneously monitors and displays combustibles, oxygen, carbon monoxide, and hydrogen sulfide. Its IP67-rated design, featuring impact-resistant rubber over-mold body resistant to RFI, incorporates dual audible alarm ports as well as alarm LEDs on 3 sides to increase condition awareness from multiple perspectives. Data logging system comes standard, and operation is accommodated via 2 glow-in-the dark, glove-friendly buttons.

Waukesha Engine Dresser Inc.
Waukesha, WI 53188
Sep 21, 2009 CFR® octane rating units are available with XCP(TM) Digital Octane Panel option, helps increase productivity and consistent inter-operator test results while reducing staff training periods and potential for error. Along with automatically generated data recording and fuel rating files that are stored in MS Excel® format, features include touchscreen GUI that includes prompts, automated calculations, on-screen reports, and data logging capabilities.

Algae-X International
Ft. Meyers Beach, FL 33932
Sep 09, 2009 Based on programmable microcontroller technology, Watect 550 works with common water probes and sensors to detect water in diesel and in other fuels. Designed to avoid probe corrosion caused by electrolysis, unit includes environmentally sealed compact flanged housing and power/alarm status LEDs. Featuring 12/24 Vdc power input, RoHS-compliant device is protected against reverse polarity, overvoltage, and overcurrent while providing safe recovery from power interruptions.

Sierra Monitor Corp.
Milpitas, CA 95035 6825
Jul 23, 2009 Network-enabled smart gas sensor, 5100-06-IT, is standalone module with integral alarm relays and 6-month (180 day) calibration interval. Integration to existing plant-wide safety and monitoring systems is facilitated via 4-20 mA output, RS-485 Modbus interface, SentryBus interface, optional integral relay output, and digital display. Non-intrusive calibration, remote sensor option, and 316 SS enclosure options are also available.

Emerson Process Management
Austin, TX 78754
Jul 08, 2009 Rosemount® Analytical OCX8800 oxygen and combustibles transmitter delivers stable and reliable measurements under many coal-fired conditions, allowing operators to fine-tune fuel-to-air ratio and minimize NOx emissions by properly monitoring burner performance. NEMA 4X rated for weather and corrosion resistance, device can be configured for general purpose installations or for hazardous area locations in which CSA/FM Class 1, Zone 1 ATEX II 2 G EExd and IECex ratings are required.

Scott Health & Safety
Monroe, NC 28111
Jun 18, 2009 Featuring 2-button interface, palm-size Protege Monitor detects oxygen, combustibles, hydrogen sulfide, and/or carbon monoxide. Data logging is based on event changes only, rather than automatic intervals, allowing for capture of relevant analytics while minimizing number of stored data points. Up to 7,000 events can be captured and stored for further analysis. To warn of high gas levels, unit uses bright visual, piercing audible, and vibrating tactile alarm indicators.

Draeger Safety, Inc.
Pittsburgh, PA 15230
Jun 10, 2009 Draeger Pac 3500 gas detectors feature replaceable filter and 2 yr operating lifespan. On Draeger Pac 5500 devices, battery, sensor, and filter can be replaced and units have indefinite lifespan with proper maintenance and servicing. Both are based on triple electrode technology, maximizing sensor life, and allow gas to enter sensor from several directions. This minimizes risk of accidentally covered inlet preventing access to sensor for measurement.

Interscan Corp.
Chatsworth, CA 91313
Jun 09, 2009 Offered in range of portable survey monitors to permanently installed multipoint systems, hydrogen peroxide monitoring instruments feature full data acquisition, archiving, and reporting capability. Products come with minimum detectability of 0.05 ppm, and full scale ranges up to 0-1,000 ppm. Suitable applications include sterile processing departments and bio-decontamination in health care industry.

General Monitors
Lake Forest, CA 92630
May 07, 2009 Offering scalable plant safety solution with voting, IR4000 Infrared Combustible Gas Detection System includes IR4000M Multi-Point Monitor that can connect up to 8 IR400 Point IR gas detectors and read their status with one command, one detector at a time. Versatile monitor incorporates display, relay module, and data concentrator in explosion-proof enclosure and magnetic interface. Certified by FM, CSA, ATEX, CE Marking, and IECEx, system is suited for use in SIL 2 environments.

Sensor Electronics Corp.
Minneapolis, MN 55436
Apr 28, 2009 Self-contained detector senses wide range of toxic or flammable gases, including carbon monoxide, gasoline, kerosene, jet fuel, and diesel, and alerts user with built-in warning lights and horn. Unit can be mounted anywhere, plugs into 110 V outlet, and incorporates digital readout panel that shows explosive/toxic gas levels in LED or PPM. Ruggedized detector works in garages, engine test bays, loading docks, tunnels and parking ramps, and air intakes near parking lots.

Cemtrex Inc.
Farmingdale, NY 11735
Apr 23, 2009 Offering true continuous measurements, Model SM-3 covers variety of sample matrices under wet and dry process conditions. Unit incorporates maintenance-free, solid-state catalyst and sensitive atomic absorption spectroscopy analyzer, suited to variety of measuring ranges.

Industrial Scientific Corp.
Oakdale, PA 15071 1500
Apr 21, 2009 Providing option of 4 or 8 relay output modules, CPS Car Park System is 8 channel digital controller designed to regulate and monitor ambient air in underground parking facilities and tunnels. It can be configured to monitor from 1-256 modules up to 3,000 ft away from controller with 6 smart transmitter options. Several sensor options including CO, NO, NO₂, CH₄, LPG, and H₂ can monitor wide range of hazards emitted by gasoline, natural gas, diesel-powered, and electric vehicles.

Analytical Technology, Inc.
Oaks, PA 19426
Apr 13, 2009 Helping to ensure regulatory compliance, field-deployable PQ45 is designed for short- to medium-term recording of specific parameters of water in various environments. It provides measurements of combined and free residual chlorine, dissolved ozone, dissolved oxygen, pH and ORP, conductivity, and residual chlorine dioxide. Also, options are available for providing outputs for telemetry, on-board data logging, or GSM data logging.