Gas / Chemical Monitors

Near-Infrared Detectors support back-facet laser-monitoring.
Gas / Chemical Monitors

Near-Infrared Detectors support back-facet laser-monitoring.

Featuring active area of 0.36 mmÂ-² and 0.70 mm², respectively, NXIR-RF36 and NXIR-RF70 Detectors are suited for integration with semiconductor lasers, including Fabry-Perot, distributed feedback, and vertical-cavity surface-emitting lasers. Devices have responsivity of 0.65 A/W at 850 nm, capacitance of 5 pF at 0 V, and shunt resistance greater than 200 MΩ. Suitable for use...

Read More »
PID Wireless 6-Gas Monitor offers real-time reading access.
Gas / Chemical Monitors

PID Wireless 6-Gas Monitor offers real-time reading access.

Certified for Class I, Division 1, Groups A/B/C/D, T4 hazardous atmospheres, portable MultiRAE Benzene delivers benzene-specific snapshot. Included 6-tube cartridge (RAE SepTube™ Cartridge) operates in conjunction withÂ- integrated photoinozation (PID) chamber. Benzene measurement range is 0.1–200 ppm, and RAE SepTube Cartridge filters out other VOCs and gases to...

Read More »
Gas / Chemical Monitors

SST Group and Intuitive Imaging Informatics Partner on Dose Tracking

SANTA CLARA, Calif.Â- – SST Group, Inc., a leading provider of DICOM distribution solutions in the United States, is excited to announce its new partnership with Intuitive Imaging Informatics, LLC, which allows Intuitive to sell SST Group's best-of-class dose monitoring software, Radiation Dose Monitor (RDM™). RDM collects, controls, analyzes and optimizes radiation doses delivered...

Read More »
Gas / Chemical Monitors

RaySafe to Showcase Benefits of Real-time Dosimetry at RSNA 2015 (Booth #1711)

Interactive Low Dose Hero Game Challenges Practitioners to Keep Their Radiation Dose Low EVERETT, Wash. - Unfors RaySafe Inc., a Fluke Biomedical company and the leading manufacturer of real-time dose monitoring solutions, will be showcasing the game, Low Dose Hero, during the Radiological Society of North America (RSNA) annual meeting, November 29 - December 3, 2015 in Chicago. Low Dose Hero...

Read More »
Temperature Monitoring System supports wallboard production.
Gas / Chemical Monitors

Temperature Monitoring System supports wallboard production.

Featuring dustproof, Ethernet-enabled design, TIP900 Non-Contact Infrared System creates highly detailed thermal images of wallboards as they leave dryer. Analyzing these, software detects moisture and density variations and identifies any faults. Thermal images and any flaws are instantly displayed on touchscreen, allowing line operator to adjust dryer for maximum board quality. Tolerances for...

Read More »
Ventilation Control features ETL certification.
Gas / Chemical Monitors

Ventilation Control features ETL certification.

Equipped with electrochemical sensor and microcomputer-based CO detection circuit, COSTAR® 24VC-e monitors unsafe levels of carbon monoxide in parking garages to protect building's occupants. Ventilation control saves energy by activating fan only when required to maintain air quality. Featuring calibration-free design,Â- unit self-tests electronic circuit and signals fault warning...

Read More »
VOC Meter logs up to 32,000 data points.
Gas / Chemical Monitors

VOC Meter logs up to 32,000 data points.

Equipped with metal-oxide semiconductor sensor, Model HHAQ-107 measures mixed gas volatile organic compound levels as part of indoor air quality maintenance program. Handheld unit can detect ammonia, toluene, ethanol, hydrogen sulfide, and cigarette smoke as well as ambient temperature, relative humidity, dew point, and wet bulb temperature. Suitable for HVAC and IAQ technicians, meter includes...

Read More »
Gas / Chemical Monitors

RaySafe Highlights Real-Time Radiation Dose Monitoring System at CIRSE 2015

RaySafe i2 Dosimeter to be demonstrated at the CIRSE Radiation Protection Pavilion EVERETT, WashingtonÂ- – Unfors RaySafe Inc., a Fluke Biomedical company and the leading manufacturer of real-time dose monitoring solutions for high-dose labs, will educate interventional radiologists about measuring and reducing their own radiation dose at the 30(th) annual Cardiovascular and Interventional...

Read More »
Gas / Chemical Monitors

Linde LoTOx(TM) Process Answer to EPA's NOx Removal Requirements

Highest NOx removal capabilities available Murray Hill New Providence, New Jersey, U.S. – To meet the ever-increasing EPA regulations for reduced NOx emissions, U.S. manufacturers can turn to Linde LLC for a proven, cost-effective NOx removal system for industrial waste gas streams.Â-  The Linde LoTOx™ solution delivers the highest NOx removal capabilities commercially available,...

Read More »
Wet Well Analysis for Methane, Oxygen and Hydrogen Sulfide
Gas / Chemical Monitors

Wet Well Analysis for Methane, Oxygen and Hydrogen Sulfide

ENMET’s Wet Well Monitoring System is specifically designed for monitoring Methane (CH4), Oxygen (O2) and Hydrogen Sulfide (H2S) in a hazardous wastewater treatment plant environment.Â-  The system incorporates the CP-60 controller with 3 remote 4-20 mA/24 VDC sensor/transmitters in Explosionproof Class I Div 1, Group B, C and D enclosures.  The CP-60 controller provides 24 VDC...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics