Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Nov 30, 2011 Delivering power dissipation below 7 mW, Sitara(TM) AM335x ARM Cortex-A8 Microprocessors include programmable real-time unit on-chip interface, enabling real-time industrial communications capability to support protocols such as EtherCAT®, Ethernet/IP, PROFIBUS®, PROFINET®, POWERLINK, and SERCOS III. Devices also include on-chip CAN, ADC, USB + PHY, and 2-port Gigabit Ethernet with IEEE1588 for network connectivity as well as connection to sensors, actuators, and motor control.

AVer Information Inc.    Milpitas, CA 95035
Nov 22, 2011 Connected directly to laptop or desktop computer, AVer U10 enables display of live documents and 3D objects with up to 720p HD resolution at 30 fps. Video and power flow through USB connection only, negating need for separate power source or connection to projector/monitor. Device can be used as standalone document camera via included A+ software, used with Skype(TM) as webcam, or integrated with any interactive whiteboard through included Flash plug-in.

Schunk    Morrisville, NC 27560
Nov 18, 2011 Featuring -170 to +170° angle of rotation and 2 integrated servo axes that can each achieve 35-64 Nm torque, SPB Powerball can be used to implement lightweight arms, service robots, and other handling applications. Integrated control and regulation electronics and 24 Vdc power supply provide basis for decentralized and mobile applications. With integrated intelligence, universal CAN communication interface, and cable technology, module can be integrated into existing control concepts.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Nov 10, 2011 Sitara(TM) AM335x ARM® Cortex(TM)-A8 microprocessors with NEON at up to 720 MHz consume as little as 7 mW of power while providing developers with 3D graphics capabilities, touch screen controller, and peripherals on one chip. Power management options help keep power levels as low as 700 mW in active mode, while integration provides CAN, 2-port Gbe switch, Dual USB + PHYs, LPDDR1/DDR2/DDR3, PRU, ADC, and cryptographic acceleration.

SAS Automation, Ltd.    Xenia, OH 45385
Nov 03, 2011 SAS Automation tool changers facilitate and accelerate mounting of EOAT (end-of-arm tooling) and gripper systems to robot arm by automatically connecting multiple ports, including air, vacuum, and electric. Robot side (QSR) is permanently attached to robot arm, and tool side (QST) is permanently attached to each individual EOAT. EOAT mounts to robot by fitting 2 sides together and then locking them into position.

STMicroelectronics    Lexington, MA 02421
Oct 14, 2011 Implemented in 65 nm CMOS process, ST-MIT voltage-scalable microprocessor SoC suits applications with limited power budget and time-varying processing loads. Power consumption is 10.2 pJ/cycle at 0.54 V, and SRAM memory cells can operate at 0.4 V. Memory-access power consumption is further reduced via latch-based instruction and data caches at first level of hierarchy. Additional features include on-chip ULP clock generation, analog-to-digital conversion, and peripherals.

SAS Automation, Ltd.    Xenia, OH 45385
Oct 06, 2011 Designed to distribute forces evenly over entire contact area, Internal Diameter Grippers include Model IDG 16 with 26-38 mm diameter range and 40 N force per jaw, Model IDG 25 with 36-56 mm range and 100 N force per jaw, and Model IDG 44 with 60-132 mm range and 400 N force per jaw. Units require one compressed air line and utilize 1/8 in. diameter Neoprene rubber cord stock inserts for secure grip. Nose adapter can be customized for locating or part stabilization.

Norbain Security    Wokingham, Berkshire   United Kingdom
Oct 04, 2011 Sarix IX Series IP Cameras and Sarix IM Series Mini Domes are available with SureVision imaging technology, which combines wide dynamic range, low-light, and anti-bloom capabilities. It enables camera to automatically adjust to deliver optimal detail, even in challenging lighting conditions. Despite bright light, low light, intense shining light, SureVision ensures optimal image quality automatically and simultaneously.

Schunk    Morrisville, NC 27560
Sep 20, 2011 Equipped with servo motor, LEG 400 weighs 6.5 kg, offers variable stroke from 0-103 mm, and delivers gripping force of up to 1,050 N. Unit can be equipped with pneumatic and electric drive and is suited for use in metal cutting and automotive industries along with assembly and handling tasks. Both drive spindles are coupled if LEG is operated with single servo motor, and fingers move synchronously. With 2 motors, fingers can move to any position in gripping range independently.

FIPA, Inc.    Atlanta, GA 30318
Aug 31, 2011 Suited for cylindrical workpieces, 3-finger parallel grippers bring workpiece to defined position via self-centering gripper fingers and provide secure grip. Stroke spectrum ranges from 2-10 mm, and gripping forces range from 20-720 N. Parallel grippers for especially long strokes cover range from 20-200 mm and gripping forces from 20 to ~500 N. They are used, for example, in systems for handling of plane injection molded parts. Both grippers accommodate sensors for detecting piston position.

Sony Electronics Inc    San Diego, CA 92127
Aug 30, 2011 Along with Translucent Mirror Technology, interchangeable lens cameras SLT-A77 (a77) and SLT-A65 (a65) feature Exmor(TM) APS HD CMOS sensor with 24.3 MP resolution and XGA OLED Tru-Finder(TM) viewfinder. Model a77 has 19-point auto focus system featuring 11 cross sensors that captures 24 MP images at 12 fps with full-time phase-detection, while Model a65 features 15-point auto focus with 3 cross sensors that achieves 10 fps. Cameras capture full HD video at 60p frame rates; 24p shooting is also available.

Harvard Apparatus, Inc.    Holliston, MA 01746 1371
Aug 02, 2011 Operated in digital camera fashion, Infrared Contrast Imaging (IRCI) camera detects IR emission influenced in predictable way by surface composition, texture, chemical make-up, thickness, tonicity, and temperature. Emissions are interpreted as distinct color patterns on reported image, identifying physical and physiological features. This allows clear visualization of histological, physiological, morphological, and metabolic phenomena down to cellular level.

STMicroelectronics    Lexington, MA 02421
Jul 27, 2011 Integrating Mentor® Embedded Inflexion(TM) User Interface software, SPEAr Processors enable implementation of dynamic 2D and 3D UIs for product differentiation in embedded control applications. Microprocessors combine one or two ARM926 processor cores and Dual Cortex A9 cores with memory interfaces and set of IP blocks delivering connectivity, communication, and A/V functions. Applications range from wireless access devices, printers, and security systems to medical and diagnostic equipment.

Schunk    Morrisville, NC 27560
Jul 19, 2011 Controlled via Ethernet TCP/IP or Profibus DP, Model WSG 50 features 110 mm stroke, variable gripping force of 1-120 N, and gripping speed of 850 mm/s. Integrated web server facilitates programming, operation, remote maintenance, and updating, while internal MicroSD card saves programs and documents. With sensors in gripper jaws, WSG 50 can measure forces that occur during gripping, making it suited for handling sensitive samples in laboratories, pharmaceuticals, and research facilities.

Igus, Inc.    East Providence, RI 02914 0349
Jul 15, 2011 Suited for automation applications, Robolink multi-axis joint modules feature actuators and control module, decoupled from tools, that minimize dynamic forces. Corrosion-resistant joints, made from tribologically optimized plastics, are driven by cables and can rotate and swivel freely. Along with central drive option, mechanical accessories are available for attaching robot joints and routing cables. Drive units featuring 4 drive motors and one housing are also available.

Denso Sales California, Inc.    Long Beach, CA 90810
Jul 06, 2011 WINCAPS III enables robot to be programmed from offline computer and allows remote monitoring of workcell operations via realtime I/O status indicators and detailed control logs. Using included 3D simulation package, users can lay out entire automation workcell in virtual environment. Solution employs robot's native command language and lets users record simulation session and save it as AVI file for later reference. Other features include Easy Teach function and several editing functions.

FIPA, Inc.    Atlanta, GA 30318
Jul 05, 2011 Offering high-speed alternative to classic vacuum cups, Customized Grippers are made from materials that comply with FDA regulations and therefore meet strict cleaning requirements of food, medical equipment, and pharmaceutical industries. Combination of gentle frictional connection and form fit guarantees secure hold even at high accelerations. Users are provided with everything in one unit, including integrated vacuum generation, gripper-robot interface, and pneumatic/vacuum gripper.

Schunk    Morrisville, NC 27560
Jun 16, 2011 Monitored with magnetic or inductive sensors, PZH-SF is capable of handling parts between 100 and 430 mm in one standard configuration. Part to part change over can be eliminated, increasing uptime and changeover complexity. Design facilitates robotic loading of machine tools and handling of cast parts. With 530 lbf, this 45 lb unit features 350 mm aluminum body that affords power density equal to double the gripper's mass.

Transduction    Mississauga, ON L4W5A1  Canada
May 27, 2011 Powered by Intel P4, Core 2 Duo, or Core 2 Quad 3.00 GHz processors, TR-SABRE accommodates up to 4 GHz of memory and can be supplied with ISA/PCI or PCI/PCIe backplane expansion slots. Touch LCD can be programmed with custom menus and function keys so that computer becomes functional instrument with operating system not accessible by user. For security, 2U rackmount computer has front panel pocket with 32 GB flash DOM, which may be removed at end of each shift.

ATI Industrial Automation    Apex, NC 27639
May 10, 2011 Featuring direct-mount 100 mm bolt circle to food-handling robots, Model QC-77 enables robots to automatically change end-effectors or other peripheral tooling in extremely stringent food-processing environments. Stainless steel design resists attack by organic and inorganic compounds while withstanding aggressive washdown. Equipped with Fail-Safe Locking Mechanism, tool changer uses integrated Lock and Unlock sensing for safe coupling and uncoupling.