Mettler-Toledo International Inc.    Greifensee 8606  Switzerland
Apr 09, 2013 Offering complete automation for testing properties and ions in drinking, ground, surface, and waste water, Titration/IC (ion chromatography) system increases process efficiency by determining up to 20 different parameters from one sample. All analyses on single sample are completed in 20 min while requiring seconds worth of interaction by operator. After sample testing, entire system is automatically cleaned, eliminating chance of sample carry over.

Ensinger    Washington, PA 15301
Apr 05, 2013 Any Ensinger/Penn Fibre extruded material up to .156 thick and 2 ft wide is available in pre-cut strips of various thicknesses and widths. Strips are slit from standard 2 x 4 ft sheets using modified slitter, and this method of pre-cutting is often needed in first step to stamping or machining operation. Since setup time is involved to prepare modified slitter to handle slitting sheets, pricing depends on number of cuts and volume being run.

KRAIBURG TPE Corp.    Duluth, GA 30096
Apr 04, 2013 Part of DW Series Compounds, THERMOLAST® K material used for O-ring in metal filter from EMME GI PLAST s.n.c., ensures flawless filtration of water in pipes and guarantees safe contact with drinking water. Growth of mold and bacteria is inhibited without addition of irritating or even poisonous chemicals. Available from 55 Shore A, DW Series compounds comply with all important drinking water standards, even when they are colored. In addition, thermoplastic elastomers repel dirt and lime.

Peter Wolters of America, Inc.    Des Plaines, IL 60016
Apr 04, 2013 Based on Moving-Wheel-Head concept, Micron Macro Machine is designed for Creep Feed-Profile and High Efficiency Deep Grinding. All linear movements are performed by grinding head, providing optimum force distribution with minimal thermal variation. Torque tube design guarantees vibration dampening and thermal stability. Available with different spindle speeds and power ranges to match application, Micron Motion can be automated with robotic loading and unloading.

Cleaning Technologies Group    Cincinnati, OH 45246
Apr 03, 2013 As entry-level ultrasonic cleaning system, PROHT SonicTank (Benchtop Series) features all-stainless steel construction and is available in various sizes. Tanks are available for use with single- or multi-frequency generators, and design is intended for workbench or drop-in use. While suited for cleaning small parts on intermittent to semi-production basis, these parts washers are not recommended for high-volume cleaning.

Simco-Ion    Hatfield, PA 19440
Apr 02, 2013 Available in 9 lengths, Pinner Easy combines static charging bar and charging generator. Use of 24 V input eliminates need for high-voltage wiring, while tungsten emitters are current-limited for increased safety. For installations where PLC or machine control system is in place, bar offers connection to fully foster integration. Fully serviceable and replaceable generator and bar assemblies minimize downtime for maintenance, and control module allows remote monitoring and adjustment.

AMPAC    Cincinnati, OH 45246
Apr 02, 2013 BioFlex Pack™, available as printed roll stock and premade pouches, requires minimal or no curing time, optimizing supply chain time. Material composition is fully biodegradable and compostable according to European regulation EN 13432 and U.S. ASTM D6400. Meeting industrial compostable standards, 90% of material will be composted ~70 days after disposal. Both adhesive and inks used in material are biodegradable; end-users can take advantage of 10 color flexographic capabilities.

Link Technologies Ltd    Bellshill,   United Kingdom
Apr 01, 2013 Cyanine 540 and 650 support continued demand for fluorescent labeling in biological imaging and molecular diagnostics. With 3’-modified 1,000 Å CPG supports, customers can add cyanine dyes directly to oligos of interest without any additional modification step. Dyes are central to numerous detection techniques, such as probes for monitoring real-time PCR, fluorescence in situ hybridization, SERRS-based DNA detection assays, and FRET studies in general.

Frontier Laboratories Ltd    Fukushima   Japan
Mar 29, 2013 Accelerating catalyst evaluation, characterization, and performance, Rx-3050TR is interfaced to GC/MS System with PC-based control software to setup each mode of operation. Software can be set to control separate temperature zones, cryogenic trapping, and analytical modes, and multiple operational modes allow different experiments to be conducted on same equipment. Flow conditions and gas compositions can be set in range of configurations to alter concentration levels and reaction gases.

LEHVOSS North America, LLC    Pawcatuck, CT 06379
Mar 29, 2013 Promoting contamination-free processing of foodstuffs, LUVOCOM® Detectables are magnetic thermoplastic compounds that combine soft magnetic components with impact-resistant polymers. Presence of fragments or particles of injection-molded, extruded, and otherwise fabricated plastic parts can be observed through metal or x-ray detection systems, allowing apprehension and rejection of contaminated food or parts with foreign particles as small as millimeters. Coloring is also possible.

Volunteer Box LLC    Gallatin, TN 37066
Mar 29, 2013 As preformed products, Tuff-Angle Edge Protectors use full double-face corrugated sheet that is scored, glued, then triple-folded into shape. Three layers create thickness, folding interlock provides corner reinforcement, and design optimizes stacking strength. Corner board can be made thick or thin by utilizing flutes from N to A/C; stacking strength can be varied by reversing corrugation to vertical; and different paper grades allow stacking strength and impact resistance to be varied.

Electrolube (A division of HK Wentworth Ltd)    Ashby-de-la-Zouch LE65 1JR  United Kingdom
Mar 28, 2013 Available in 400 ml aerosol form with integral brush or in 5 L bulk containers, HFFR is hexane-free flux remover designed for use during PCB manufacture. This fast-drying cleaning solvent eliminates use of hazardous n-Hexane material while efficiently removing range of flux residues from PCBs. Product leaves clean, dry surface without any residue.

Aspen Aerogels Inc.    Malborough, MA 01752
Mar 28, 2013 Formed of silica aerogel and reinforced with non-woven, glass-fiber batting, Pyrogel® XT-E insulates piping, vessels, tanks, and equipment in applications up to 1,200°F. Roll sizes of 1,500 and 850 ft² for respective material thicknesses of 0.20 and 0.40 in. help minimize labor during installation, while design minimizes dust to facilitate handling and clean-up. Flexible blanket has density of 12.5 lb/ft³ and water repellency/breathability properties that combat corrosion under insulation.

PNC, Inc.    Nutley, NJ 07110
Mar 28, 2013 UL qualification of polyimide base materials VT-901 laminate and VT-901PP prepreg includes 0.002 in. inner layer cores and minimum overall board thickness stack up of 0.025 in. Furthermore, qualification of these high-temperature, high-reliability products includes minimum outer layer copper thickness of ½ oz copper and inner layer max of 2 oz copper.

Mettler-Toledo International Inc.    Greifensee 8606  Switzerland
Mar 25, 2013 Designed for basic requirements and first-time users of automatic titrators in food and chemical industries, EasyPlus™ focuses on accurately automating routine titrations. Interface is based on App format to enhance usability, and iTitrate™ guidance leads operators through setup and method programming step-by-step. Also included, EasyDirect™ titration software stores and collates all records and archives data to minimize confusion, errors, and misinterpretation of results.

AGY    Aiken, SC 29801
Mar 22, 2013 Used as reinforcement and dielectric, BC2250 and BC3000 allow PCB suppliers to create thinner laminates for higher layer counts and greater circuit density. Yarns are woven into fabric and then laminated with epoxy resin and copper foil to produce copper clad laminate. E-Glass composition contributes to electrical insulation and provides thermo-mechanical stability, and reinforcement with glass fiber fabrics promotes dimensional stability. BC3000 consists of 50 filaments of 4 micron dia.

Riveer    South Haven, MI 49090
Mar 22, 2013 Powered by Kubota® diesel engine equipped with speed control, RipTide™ Pressure Washer provides full-bore water delivery for jobsite vehicle and equipment cleaning. Depending on configuration, unit can pump 16–90 gpm from 1, 2, or 3 independent pumps, each with operator controlled water pressure, temperature, and solvent mix. Each pump is connected directly to 100 ft hose reel. Twin fuel tanks, one for motor and one for burners, feature 35 gal capacity each.

Riveer    South Haven, MI 49090
Mar 22, 2013 Automatic Paving Equipment Cleaning System (APECS™) cleans asphalt and bituminous road oil from paving equipment, oil distributors, compactors, and tools. Spray pattern power washes with cleaning solutions or solvents and then recirculates solution for reuse. Closed-loop, plug-and-play system includes heavy-duty, above-grade wash rack with 2 drains, pressure pumps, and settling tank. Bank of adjustable, tri-wall spray bars optimize coverage, and additional spray wands are available.

Johnson Electric    New Territories   Hong Kong (prc)
Mar 22, 2013 Salon-Power™ hair dryer motors feature magnetic and mechanical design optimized for performance. Weighing less than 250 g, U5413-L delivers 1,800 W of power, has rated life of 1,000 hr. Model U5413-P weighs 250 g and provides 20% more air power and 20% longer operating life, while 2,200 W-rated U5615 has 1,500 hr operating life. Also available, QC381 DC motor has operating life of less than 1,000 hr and delivers less than 1,800 W from 100 g package.

Indium Corporation    Clinton, NY 13323
Mar 20, 2013 Designed for use in package-on-package applications 0.3 mm and larger, Indium9.91 can be used with SAC305 and Sn63/Pb37 alloys. Product's rheology optimizes both dipping and package retention. Featuring typical viscosity of 150 kcps, typical tack strength of 40 g, and working life of 8 hours at room temperature, solder paste eliminates defects due to package warping.