New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Material Processing

Cone Mantle Field Trials Look Promising for Columbia Steel's High-Output Design

Cone Mantle Field Trials Look Promising for Columbia Steel's High-Output Design

A new, patented cone mantle design offers improved crusher output based on initial field trials, reports Columbia Steel Casting Co., Inc. By looking beyond the concept of simple gravity feeding, Columbia's engineers have developed a unique mantle modification intended to direct feed more efficiently into a crushing chamber. We've found that filling a crushing chamber via typical gravity feed may...

Read More »
Pleated Cartridges for Bag Filter Housings

Pleated Cartridges for Bag Filter Housings

Flow Ezy's pleated bags give up to 12 times the filtration that normal filter bags do. They are easy to use, too. Also, when removing the dirty cartridge, the contamination does not wash or slide off. They are just like cartridge elements, providing more surface area, thus giving more dirt-holding capacity. When you have a filter that requires frequent changing, pleated bags are the best option....

Read More »
Vibrating Dewatering Screens Remove Excess Moisture to Save Energy in Fluid Bed Drying

Vibrating Dewatering Screens Remove Excess Moisture to Save Energy in Fluid Bed Drying

Witte Co. Approach Allows Saturated Materials to Dry Faster Washington, NJ: Vibrating dewatering screens from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), remove excess moisture from saturated materials to allow fast, efficient drying downstream in a fluid bed dryer. Draining the moisture mechanically at low cost instead of using heat energy, the vibrating...

Read More »
DesignWare ARC EM Safety Islands Processors can be configurable and extendable.

DesignWare ARC EM Safety Islands Processors can be configurable and extendable.

ARC EM Safety Islands Processors are available in EM4SI, EM6SI, EM5DSI and EM7DS models. Featuring self-checking safety monitor for lockstep operation, units are equipped with error correcting code logic. Embedded with programmable watchdog timer, processors come with hardware stack protection, microDMA controller and memory protection unit. Units can be operated in lockstep mode for ASIL D...

Read More »
Converting Machines come with learning error compensation.

Converting Machines come with learning error compensation.

Embedded with prismatic winding and Learning Error Compensation, Converting Machine’s prismatic winding compensates for path difference on non-circular winding bodies. Compensating for position errors, unit’s LECo function compensates for periodic disturbance variables and restores product quality.

Read More »
Nordson MARCH Wins 2017 New Product Introduction Award for its ModVIA Plasma System

Nordson MARCH Wins 2017 New Product Introduction Award for its ModVIA Plasma System

System doubles capacity for production demands Concord, California, USA - 7 March 2017 - Nordson MARCH, a Nordson company (NASDAQ: NDSN), a global leader in plasma processing technology, has won the 2017 New Product Introduction (NPI) Award in the Surface Treatment Equipment category for its ModVIA™ Plasma Treatment System. The Award, sponsored by Printed Circuit Design and Fab magazine, was...

Read More »
Polifan® Z SG-Power Flap Discs can deal with high contact pressure.

Polifan® Z SG-Power Flap Discs can deal with high contact pressure.

Used on stainless steel and steel, Polifan® SG-POWER Flap Discs are available in conical shape with 4 1/2, 5 and 7-in. diameters in either 5/8-11 threaded or 7/8 in. plain arbor holes. Designed in 40 and 60 grit sizes, discs are suitable for working on weld seams, chamfering and surface grinding steel. Device delivers optimum stock removal on high-powered angle grinders at higher contact...

Read More »

Dental Milling Devices come with automatic disc changers.

DWP-80S Dental 3D Printer and DWX-52DC Dental Mill are designed for dental applications. Embedded with quick denta software, DWP-80S has 80 mm x 80 mm x 80 mm work area and allows for simultaneous printing. Featuring 15-station automatic tool changer which holds, DWX-52DC comes with intelligent tool changer and virtual machine panel software. Using ball screw-driven 5-axis machining, DWX-52DC...

Read More »
Phoseon Technology Increases Power and Performance to FireJet(TM) FJ100

Phoseon Technology Increases Power and Performance to FireJet(TM) FJ100

Higher intensity plus a small, full cure form factor HILLSBORO, OR - (March 01, 2017) - Phoseon Technology increases the peak intensity of the FireJet™ FJ100 LED curing solution by 50%, up to 12W/cm^2. The FireJet FJ100 provides an ideal combination of size and power for space constrained environments requiring high intensity curing performance. With WhisperCool™ technology and TargetCure™...

Read More »
Indeco North America Releases New Product Lines at CONEXPO 2017

Indeco North America Releases New Product Lines at CONEXPO 2017

- North and South American Roll-out Includes Fuel-Saving Breakers, Redesigned Pulverizers, Versatile Multis and Heavy Duty Grabs to Increase Jobsite Productivity and Reduce Costs - MILFORD, CT, March 1, 2017 – Continuing its “smart-growth” strategy of identifying, evaluating and delivering new product innovations that provide quantifiable business value to the construction and demolition...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics