Filters & Breathers

Architectural and Civil Engineering Products, Fluid & Gas Flow Equipment

PhosphoSorb® Media Achieves a General Use Level Designation from the Washington State Department of Ecology

July 12, 2016

West Chester, OH – West Chester-based Contech Engineered Solutions announced today that the Stormwater Management StormFilter® (StormFilter) with PhosphoSorb® media has achieved a General Use Level Designation (GULD) for Basic (TSS) and Phosphorus treatment from Washington State Department of Ecology. The StormFilter was the first technology to receive a General Use Level Designation for... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

High-Flow FRLs feature 1/8 and 1/4 in. port sizes.

July 5, 2016

Designed to fit in compact applications, 651 Series Filters/Regulators/Lubricators offer extended temperature range of -40 to 80°C, permitting use across broad range of operating conditions, including those with harsh environments. Manifold endplate flanges allow maintenance technician to pull manifold assembly out of service without disconnecting piping. FRLs come with front-facing, low-profile gauges on shut-off isolation valves and slow-start/quick exhaust valves. Read More

Fluid & Gas Flow Equipment, Transportation Industry Products

Diesel Particulate Filters fit light- and medium-duty vehicles.

June 15, 2016

Built to deliver performance equivalent to OEM unit, Diesel Particulate Filters (DPFs) for GM/Duramax, Dodge/Cummins, and Ford Powerstroke equipped diesel trucks filter out 99% of engine-out soot/PM (particulate matter). Design offers optimal backpressure levels and PGM (Platinum Group Metals) loading for durability and cleaner exhaust. Offered as direct-fit solutions for light- and medium-duty vehicles, these DPFs are available for Class 2 and 3 vehicles. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Waste Handling Equipment

Final Filtration Solutions meet Tier 4 engine quality standards.

June 8, 2016

Filters and coalescers remove fine particulates and emulsified water from fuel to protect Tier 4 engines. Combining use of RCI fuel purifiers with these filters and coalescers will optimize fuel filtration to meet fuel quality standards set for Tier 4 engines using ULSD fuel while enhancing effectiveness of RCI fuel purifiers and fuel polishing systems. Read More

Fluid & Gas Flow Equipment

Modular Coolant Filters support abrasive machining.

April 26, 2016

Available in 55- and 110-gallon capacities, SVF Series Grit Guard® Coolant Filters are equipped with twin and quad Sunnen PF filter cartridges, with total filtration capacity of 8,800 in.² and 17,600 in.², respectively. Modular design allows adding deep bed paper filter (110-gal only), magnetic separator, and cooling to suit application. Cartridges are available for 11, 18, and 60-micron chips in both oil and oil/waterbase compatible configurations. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Test & Measuring Instruments

User-Serviceable Photometers optimize filter testers.

April 15, 2016

Designed to retrofit to Model 8127 and 8130 filter testers, Model 8177 User-Serviceable Photometers feature solid-state laser diodes and fast response and purge times. Upstream and downstream photometers can be cleaned by trained technician on site in less than 1 hour, minimizing downtime. Capable of measuring filtration efficiencies up to 99.999%, automated filter testers are 42 CFR 84, EN 143, ISO 23328-1, and GB2626 compliant. Read More

Fluid & Gas Flow Equipment, Laboratory and Research Supplies & Equipment

We Have NSF/ANSI 61 Certification for String Wound Filters

April 14, 2016

Delta Pure Filtration has achieved its first NSF/ANSI 61 certifications. The first product that we are announcing is our DW Series string wound filters which use polypropylene complying with FDA CFR - more announcements to follow!  NSF/ANSI 61 was developed to establish minimum requirements for the control of potential adverse human health effects from products that contact drinking water,... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Green & Clean

One-Pass Filtration System handles high-solids processing.

April 7, 2016

Integrating automatic self-cleaning filter, Filtration System utilizes proprietary sensor technology that measures build-up of solids electronically and automatically activates valve to purge them. Because technology allows one-pass low micron filtration, requiring no backwash or crossflow, high and variable solids are automatically concentrated and purged in process. This facilitates solids recovery and management while minimizing diluted wastewater. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Materials & Material Processing

Heavy-Duty Rotary Screen minimizes downtime with extended service.

April 5, 2016

Designed for blast machines operating in heavy-duty environments, HD Rotary Screen sifts out larger chunks of debris, such as core lumps, ahead of airwash and/or magnetic separation during abrasive cleaning cycle. Construction of this hard-wearing rotary screen, designed for extended service life, contributes to sturdiness via use of hard steels in strategic locations, abrasive-resistant flighting and end bands, as well as DOM tubing.

Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Vacuum Pump Inlet Trap features 80 sq ft of filter media.

April 1, 2016

Available with NW-40 to ISO-160 ports, MV Multi-Trap® 16 in. Stacked High-Capacity Vacuum Inlet Trap features one large pleated polyester filter element that provides 80 ft² of coverage to capture and retain 60 grams/ft² of particulates. Filter can be supplied with 25- and 100-micron ratings for vacuum processes that generate large amounts of contaminants. Stainless steel housing is offered in straight-through and right angle configurations. Read More

Fluid & Gas Flow Equipment

Diesel Fuel Filter efficiently removes particulate and water.

March 22, 2016

Available for flow rates up to 210 gpm, Bulk Diesel Fuel Filter Skid | BDS3 incorporates one particulate filter and 3 coalescing filters for 99.5% single-pass particulate and water removal from ULSD 15 and similar petroleum fuels as well as biodiesel and all petroleum-based blends. This in-line unit is also available with optional water sump heater and automatic water drain with 5 or 20 gal remote sump. While porting base is anodized aluminum, both element case and cap are plated steel. Read More

Fluid & Gas Flow Equipment

In-Line Coalescing Filter Element fits in space-restricted areas.

March 22, 2016

Offered as coalescing element for In-line Coalescing Filter (ICF), C184Z7VE is optimized for water removal and dirt holding capacity. These characteristics suit in-line, single-pass applications where space is restricted, such as on fuel dispensers, or where particulate and coalescing filter combination would exceed space allowances. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Bulk Diesel Fuel Filter Cart offers up to 70 gpm flow rate.

March 21, 2016

With 3-stage filtration that employs bag filter as well as particulate and coalescing filter, Bulk Diesel Coalescing Cart (BDC) is used for gross removal of microbial bloom contamination, rust, sludge, and water from bulk diesel fuel. Standard BDC is 25 gpm cart with available water sump heater and automatic water drain with 5 gal remote sump on cart; optional 70 gpm flow rate is also available to fit range of bulk diesel tank sizes. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Tap Water Filters reduce contaminants in four areas.

March 11, 2016

Encompassing electro-adsorption technology, Trident Three-Stage Water Filtration Systems employ ULTRA-D submicron filters to reduce contaminants in tap water. These point-of-entry systems address contaminants in all 4 areas: aesthetic, solids and metals, pathogens, and chemicals. First stage is ULTRA-D high-flow, submicron filter; second stage consists of ULTRA-D, PAC/Agion submicron filter; and third stage is 1 micron catalytic carbon block filter. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage, Green & Clean

Compressed Air Filters increase performance, energy efficiency.

March 11, 2016

Available for 20–500 scfm flows, compressed air filters deliver reliable compressed air quality with minimized pressure drop to help conserve energy. Products include liquid separator, particulate, coalescing, and oil vapor adsorbing filters. While particulate and coalescing filters feature deep pleated filter elements wrapped in stainless steel cages, vapor filters use carbon matting to prevent channeling, reduce pressure drop, and prevent particles from escaping. Read More

Fluid & Gas Flow Equipment, HVAC

Dust Collector Filter is flame retardant and conductive.

February 25, 2016

Featuring carbon-impregnated filtration media, HemiPleat® FR Carbon Dust Collector Filter is designed for dust handling applications that require flame resistance as well as dissipation of static charges, including many metal dusts; fumed silica dust; plastic, PVC, or composite dusts; and pharmaceutical dusts. Product is available in 2 media types: standard HemiPleat open-pleat high efficiency media or HemiPleat eXtreme nano fiber media, which offers MERV 15 efficiency rating. Read More

Fluid & Gas Flow Equipment

Breather Strainers equalize pressure in enclosures.

February 10, 2016

Available in metric sizes with stainless steel mesh of 100 or 500 µm, GN 7403 Aluminum Breather Strainers are mounted into wall of enclosures, ensuring pressure equilibrium between inside of enclosure and outside. Outside diameter of enclosure with recessed hexagon matches bolt mounting holes for DIN 3852 threaded pipe connectors. Any dirt and dust particles carried by particular medium are prevented from exiting. Sealing ring is embedded in radial and plane-sided recess that makes seal captive. Read More

Communication Systems & Equipment, Electronic Components & Devices, Fluid & Gas Flow Equipment, Optics & Photonics

Fluorescence Bandpass Filters match common fluorophores.

February 9, 2016

With 18 additional models at center wavelengths ranging from 386–648 nm, TECHSPEC® Fluorescence Bandpass Filters suit fluorescence imaging applications. Units feature greater than 93% transmission and greater than OD 6 blocking outside desired passband, less than 3% from edge of bandwidth, to ensure detection of weakest signals. Offered in 12.5, 25, and 50 mm diameters, filters are manufactured with hard sputtered coating on single fused silica substrate and mounted in black anodized ring. Read More

Fluid & Gas Flow Equipment, HVAC, Plant Furnishings & Accessories

Filtered Chemical Workstations use ductless technology.

February 8, 2016

With 3 stages of filtration media, Isola™ Filtered Chemical Workstations protect end user and environment from hazardous chemical fumes and vapors. Isola™ VUE features 360° clear viewing area for demonstration experiments, while Isola™ PRO polypropylene filtered chemical workstation offers chemical resistance for corrosive applications. Featuring dual wall thermally fused solid polypropylene main chamber, Isola™ EDGE allows installation of laboratory fixtures and electrical outlets. Read More

Fluid & Gas Flow Equipment, Transportation Industry Products

Service Kit supports double clutch gear transmissions.

January 22, 2016

Designed for required 40K mile service call on Audi/Volkswagen double clutch gear transmissions, Pentosin FFL2 Transmission Service Kit includes precise amount of Pentosin FFL2 Transmission Fluid in 5 L bottle, along with Rein Automotive OE filter and drain plug washer. Pentosin FFL2 is formulated on fully synthetic oil-based technology for safe operation at highest thermal loads and features special clutch friction performance. Read More