Fluid & Gas Flow Equipment

Fluid & Gas Flow Equipment

Isolation Valves suit tight-fit applications.

November 17, 2001

Model KV-2 inert, manifold-mount, solenoid-operated, two-way, normally closed isolation valves measure 6 mm in width. They have internal volumes of 10 microL at inlet and outlet and virtually zero dead volume. KV-2 valves feature all inert, internal wetted parts that are diaphragm isolated from coil assembly and other metallic parts. They are suitable for low volume fluidic systems. Read More

Fluid & Gas Flow Equipment

Diverter Valves handle pressures from 0 to 15 psig.

November 17, 2001

Diverter Valves are constructed with cast-iron body and end plates, with one-piece ductile iron rotor to hold critical dimensions and resist abrasion. Features include guarded actuators, ledge design that directs material, and triple protected bearings. Available control options include manual, air cylinder, air operated rotary actuators, and electric actuators. Diverter valves are available in... Read More

Fluid & Gas Flow Equipment

Valve Manifold features single mounting flange.

November 17, 2001

HM53 3-valve instrument manifold performs block, equalizing and vent requirements of differential pressure transmitter applications. It features non-rotating tip stem that provides tight, repeatable shutoff without galling or cross-scoring. Flange allows transmitter to bolt directly to manifold, which eliminates piping of excess tubing and nipples. HM53 is available in Hastelloy, Monel, Alloy 20,... Read More

Fluid & Gas Flow Equipment

Submersible Pumps do not require cleaning.

November 17, 2001

N-Pumps employ open-type self-cleaning impeller, and while operating, each leading edge passes across sharp stationary relief-groove. This action ensures that rags, stringy materials and solids are sheared, cleaned from impeller and pumped away. Pumps maintain high level of efficiency, even in fluids with high solids and fibrous content. Read More

Fluid & Gas Flow Equipment

Control Valve offers operating pressure up to 4,600 psi.

November 16, 2001

Duplomatic DS5 directional control valve is a high-performance, five-chamber, NFPA-Standard valve with flow capacity to 40 gpm. Standard features offer a variety of spool configurations including a tandem center model capable of P to T flows of 27 gpm at 2,000 psi. Soft shift option can reduce operating shock and minimize valve and system failure. Coils are standard with plugs to accept DIN 43650... Read More

Fluid & Gas Flow Equipment

Metering Pumps feature corrosion resistance.

November 16, 2001

MD Metering Pumps are available with rotating parts in 316 stainless steel, Hastelloy® C4, titanium or Kynar® and casings in HDPE, 316 stainless steel, or Halar®-coated stainless steel. Mechanical seals are available with various metallurgies; PTFE lip seal can also be used. Pumps handle thin liquids and materials to 100,000 cps. They do not require pulsation dampeners or pressure... Read More

Fluid & Gas Flow Equipment

Pump Head handles 2 channels at once.

November 15, 2001

Masterflex Easy-Load II pump head can pump 2 channels simultaneously, eliminating need for stacking pump heads. Flow range is 0.06 to 1000 mLpm per channel depending on drive rpm and tubing selection. Each pump head accepts L/S 13, L/SC 14, L/S 16 and L/S 25 tubing sizes in any formulation. Available with cold-rolled steel or stainless steel rotors, pump head is also suitable for applications... Read More

Fluid & Gas Flow Equipment

Diaphragm Pump primes itself to 23 ft wc.

November 15, 2001

Air-operated Tapflo Aluminum Series double diaphragm pumps are suited for wide range of media, including paint and coatings, waste plant chemical dosing and many other pH-neutral liquid pumping applications. Pumps are available in 5 sizes covering flow capacities up to 110 gpm with infinitely variable flow control and dry run capability. Pumps handle wide range of fluid viscosities as well as... Read More

Fluid & Gas Flow Equipment

Air Coupler meets ISO standard 4414.

November 15, 2001

Safe Air safety air coupler is rated to 232 psi and can be used to protect pneumatics, shop air applications, and other general air handling systems. 2-stage disconnection eliminates pop-off injuries. Stage 1 vents air pressure; stage 2 disconnects coupler. Coupler will not disconnect without manual vent-release step, and it cannot accidentally disconnect. Sizes are 1/4 to 1/2 in., with hose... Read More

Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage

Compressed Air Filters remove oil, mists, vapors and smells.

November 15, 2001

D Series includes Type CF high-efficiency coalescing filter that removes oil and aerosols; Type CC general purpose unit, suitable as prefilter for high efficiency filters; Type PF, which takes out fine particulate matter; and Type VF, which removes hydrocarbon vapors and their associated odors and tastes. Each has carousel color-indicating differential pressure gauge, easy element change-out and... Read More

Fluid & Gas Flow Equipment

Pump Tubing handles pressures to 100 psi.

November 14, 2001

Masterflex® High-Pressure Pump Tubing is available in PharMed® and Norprene® formulations. PharMed meets FDA and USP Class VI approval criteria, and is NSF-listed. Norprene is heat-sealable, non-aging, non-oxidizing and autoclavable. Maximum temperature for both is 270°F. High-Pressure tubing is suitable for use with Masterflex L/S® High-Pressure pump system with L/S... Read More

Fluid & Gas Flow Equipment

High Pressure Hoses handle up to 6,000 psi.

November 13, 2001

Models 792TC and 792ST spiral hoses exceed SAE 100R15 specifications, making them suitable for hydrostatic transmissions, power units, injection molding machinery, test stands, and mining equipment. Both are constructed of 6 spirals of high-tensile steel wire reinforcement, have oil-resistant high-Nitrile inner tube that is compatible with hydraulic fluid, and have abrasion-resistant covers with... Read More

Fluid & Gas Flow Equipment

Proportional Valve controls pneumatic pressure.

November 9, 2001

Compact Model VP-22 provides variable pressure output in response to a 0 to 10 Vdc or 4 to 20 mA analog control signal. Integral pressure sensor provides closed-loop response. Direct plug-in pneumatic connections accept flexible tubing, eliminating need for pipe fittings. It has scalable pressure output, adjustable damping, low power consumption and LED status indication. Available in full-scale... Read More

Fluid & Gas Flow Equipment

Ball Valves are used for clean-in-place applications.

November 9, 2001

Actuated Ball Valves are constructed of thermoplastics and feature trunnion design to withstand CIP processes. Shafts are strengthened with stainless steel rod. Teflon seats are energized with O-rings, and no metal parts are exposed to process liquid. Actuators are available with electric or pneumatic operation. Both are built from corrosion-resistant thermoplastics and are water and dust-tight... Read More

Fluid & Gas Flow Equipment

Vane Pump handles high-volatility fluids.

November 8, 2001

Magnatex® MPT Regenerative Turbine Vane Pump is a magnetically driven, sealless pump featuring a regenerative turbine vane impeller and rare earth Neodymium magnets for synchronous drive with no slippage. Close-coupled design eliminates alignment problems. Pump is capable of operation under 2 ft of static NPSH at line pressures up to 100 psi and flow rates of 2-3 gpm. Read More

Fluid & Gas Flow Equipment

Proportional Valves feature close tolerance spools.

November 8, 2001

DFW proportional, directional control valves can be used for reproducible control of actuator speed in rapid/slow speed profiling as well as smooth acceleration and deceleration. D1FW features flow rating to 12.5 gpm, while D3FW has flow rating to 45 gpm. Connection options include conduit boxes with wire leads, flying leads or DIN-type connectors. Read More

Fluid & Gas Flow Equipment

Hoses are ideal for half-bend radius applications.

November 8, 2001

Models 351TC and 351ST abrasion-resistant hoses, designed for 1/2 SAE 100R1 minimum bend radius applications, are available with MSHA-accepted Tough Cover or Super Tough polymeric cover. Both offer 4,000 psi constant working pressure in sizes that range from 1/4 in. to 3/4 in. I.D. They are constructed of oil-resistant, Nitrile-based synthetic rubber tube, with 2 braids of high-tensile steel wire... Read More

Fluid & Gas Flow Equipment

2-Way Poppet Valves feature bubble tight shut-off.

November 8, 2001

SV72 Series 2-way inert balanced-poppet solenoid valves are designed to control corrosive fluids by isolating metal components from operating media. They employ two rolling diaphragms that act as isolating barriers and balancing areas. SV72 valves feature bubble tight shut-off and are mountable in any position. They offer pressure ratings of 100 psi with a Cv of 4.0. Valves are available with 115... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Portable Tray Filters recycle, reclaim and reuse fluids.

November 8, 2001

Portable Tray Filters interchangeably filter 1 or several fluids. Sizes are available to fit on top of 55 gal drums or larger tank or pit sizes. When disposable fabric filter media is advanced to clean section, contaminated fluid may be introduced. Read More

Fluid & Gas Flow Equipment

Miniature Pneumatic Valve System has manual overrides.

November 8, 2001

Moduflex(TM) Miniature Pneumatic Valve System can be assembled in dual 3/2, 4/2 and 4/3 configurations in one island to meet application requirements (10 mm to 100 mm actuator bore sizes). Tie-rod connections are used to add or delete valves, as well as change valve function, tubing size or piloting. Moduflex Valve System consists of 2 valve sizes: 0.38 Cv and 1.13 Cv. Both have 2.5 mm stroke, 14... Read More