Fluid & Gas Flow Equipment

Cleaning Products & Equipment, Fluid & Gas Flow Equipment

Hose and Couplings suit pressure wash applications.

March 14, 2016

Operating from -40 to +300°, Hose and Couplings are suited for pressure washing, car wash systems, and carpet cleaning systems. Hose is made from water-resistant synthetic rubber, reinforced with 1 or 2 high tensile steel wire braids. Tubing is covered with black or non-marking blue coating that is abrasion, ozone, and weather-resistant. K2 Couplings, offered in sizes 4–10, feature Bite-Wire... Read More

Fluid & Gas Flow Equipment

Diverter Valve offers adjustable alignment stops in housing.

March 14, 2016

Constructed with cast iron or aluminum housing, tunnel, and end plates, 2nd Generation PT45 Parallel Tunnel Diverter Valve offers 2-way switching capability for either dilute phase or dense phase conveying applications. Positive food-grade rubber silicone seal at each port helps prevent contamination. Other features include position indication from tunnel itself, 45° port-to-port rotation, and... Read More

Fluid & Gas Flow Equipment, Health, Medical, & Dental Supplies and Equipment, Laboratory and Research Supplies and Equipment, Materials & Material Processing

Meissner to Exhibit at the IBC's BPI West in Oakland, California

March 14, 2016

Meissner is pleased to announce its participation in the IBC’s BioProcessing International West Conference and Exhibition, in Oakland, California, during the week of March 14, 2016. Meissner will be hosting guests in booth #609 from March 15 – 17, at the Oakland Marriott City Center, California, where the Conference and Exhibition are being held. Meissner will be providing visitors with... Read More

Fluid & Gas Flow Equipment

Atomizing Spray Nozzle provides 360 degree coverage.

March 11, 2016

Constructed of stainless steel, 1/4 NPT internal mix 360° hollow circular pattern atomizing spray nozzle can be used to coat, cool, treat, and paint products with up to 300 cps liquids. Liquid combines with compressed air inside air cap, and resulting fine mist of atomized liquid, which sprays away from nozzle in all directions, can be adjusted as needed. Supporting liquid flows from... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Tap Water Filters reduce contaminants in four areas.

March 11, 2016

Encompassing electro-adsorption technology, Trident Three-Stage Water Filtration Systems employ ULTRA-D submicron filters to reduce contaminants in tap water. These point-of-entry systems address contaminants in all 4 areas: aesthetic, solids and metals, pathogens, and chemicals. First stage is ULTRA-D high-flow, submicron filter; second stage consists of ULTRA-D, PAC/Agion submicron... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, Green & Clean, HVAC, Material Handling & Storage

Compressed Air Filters increase performance, energy efficiency.

March 11, 2016

Available for 20–500 scfm flows, compressed air filters deliver reliable compressed air quality with minimized pressure drop to help conserve energy. Products include liquid separator, particulate, coalescing, and oil vapor adsorbing filters. While particulate and coalescing filters feature deep pleated filter elements wrapped in stainless steel cages, vapor filters use carbon matting to... Read More

Fluid & Gas Flow Equipment

Valve and Manifold Accessories work with pressure instruments.

March 10, 2016

Line of stainless steel valve and manifold accessories is available for use in pressure instrument installations. Pressure limiting valve, gauge valve, and multi-valve manifolds are available in several configurations to bleed, isolate, or equalize pressure. Read More

Electronic Components & Devices, Fluid & Gas Flow Equipment, Mechanical Power Transmission, Transportation Industry Products

Standard Motor Products Releases 197 New Parts for Standard® and Intermotor®

March 9, 2016

NEW YORK - Standard Motor Products, Inc. (SMP) announces the addition of 197 new part numbers to its Standard® and Intermotor® lines. The release expands coverage through the 2015 model year covering more than 60 million additional VIO. The highlight is the addition of 110 SKUs to the company's diesel line, including both new product categories and line expansions to existing... Read More

Fluid & Gas Flow Equipment, Non-Industrial Products

Flexible Watering Wand reaches otherwise inaccessible areas.

March 9, 2016

Offering 9 spray patterns, Snake Wand™ enables delivery of water in infinite configurations. Utilization of SnakeLight™ in full-featured water wand provides endless watering opportunities, and ABS plastic joints adjust to almost any angle to facilitate watering tasks. Head supports upwards positioning for spraying underneath steps and cars or at arc for cleaning out eaves and... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

ViscoTec 30,000th Filling Pump in Operation at Bayer

March 9, 2016

ViscoTec 30,000th filling pump in operation at Bayer ViscoTec products impress worldwide in pharmaceutical and biotechnical sector Thanks to its extensive range of services, professional consulting and high-quality, technologically advanced products, ViscoTec convinces in various application sectors. At the end of 2015 there was an extra reason to celebrate: the dosing machine specialist has sold... Read More

Fluid & Gas Flow Equipment

Fine Tubes in the United Kingdom and Superior Tube in the United States are Awarded Contracts by Airbus

March 8, 2016

PLYMOUTH, UK - UK-based Fine Tubes and US-based Superior Tube, leading manufacturers and global suppliers of precision tubes for critical applications, have both been awarded contracts by leading airframe manufacturer, Airbus, Toulouse, France. For Fine Tubes, the award represents not just an extension of its long-standing relationship with Airbus, but also a greater share of the aircraft... Read More

Fluid & Gas Flow Equipment, Green & Clean, HVAC

York Affinity Air Conditioners and Heat Pumps Designated ENERGY STAR Most Efficient 2016

March 7, 2016

MILWAUKEE – Johnson Controls announces two of its York Affinity CZH split system air conditioners and one York Affinity YZH heat pump model have again been recognized as ENERGY STAR® Most Efficient 2016, when combined with the Affinity Residential Communicating Control. The ENERGY STAR Most Efficient 2016 designation is awarded to the most efficient products among those that qualify for... Read More

Fluid & Gas Flow Equipment

Submersible Pumps handle temperatures up to 200°F.

March 3, 2016

Used to pump clear or solids-laden liquids up to 200°F, SKGF Series employs RAD-AX® Dual Shredding Technology, featuring radial and axial shredding elements of hardened 440C Stainless Steel (HRC 55), to obliterate difficult solids. Size of solids passage through impeller and volute, coupled to high-torque, 4-pole motor (2, 3, and 5 hp), enable large solids shredding. Motor winding... Read More

Fluid & Gas Flow Equipment, HVAC

Portable Heater Duct helps keep workers comfortable.

March 3, 2016

Combining smooth interior for optimal airflow and safety orange wear strip for drag resistance, Springflex® FX-400 increases worker comfort at construction sites and remote oil industry applications. This urethane-coated polyester blower hose, offered in 12–24 in. IDs with closely sewn flap construction, is moisture resistant and UV stabilized to prevent mold and mildew. Operating... Read More

Controls & Controllers, Fluid & Gas Flow Equipment, HVAC

Danfoss to Demonstrate Easy and Reliable Aftermarket Solutions at ACCA 2016 and IE3 Expo

March 3, 2016

Danfoss, a world-leading supplier of technologies for refrigeration, air conditioning, heating, motor control and mobile machinery, will be demonstrating the reliability and ease of its aftermarket solutions at the ACCA 2016 and IE3: Indoor Environment Energy Expo. Stop by Booth 721 to learn about Danfoss products and technologies for all your application needs. The products to be showcased will... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Rotary Vacuum Pumps offer maintenance-free operation.

March 1, 2016

Engineered for factory automation applications, Rotary Vacuum Pumps feature fully balanced design that minimizes vibration. Minimum clearance between rotor and cylinder wall of pump results in virtually contactless design and reduction in sliding parts. Because pumps use magnet coupling, and no sliding seal is required, maintenance due to seal abrasion is not necessary. Pumps generate low heat... Read More

Fluid & Gas Flow Equipment

Retrofit Multifunction Control Valves reduce energy/service needs.

February 29, 2016

Enabling reductions in expense, energy, and service/maintenance time, ICF multifunction control valves serve as replacements for conventional mechanical, electro-mechanical, and electronically operated valves. Each product consists of one valve housing plus maximum of 4 or 6 function modules. Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Green & Clean, HVAC

Tecogen to Exhibit at GLOBALCON Expo

February 29, 2016

WALTHAM, Mass. – Tecogen® Inc. (NASDAQ: TGEN) is pleased to announce the Company will be exhibiting its premier line of efficient clean energy solutions at the 46(th) annual GLOBALCON Expo to be held March 9(th)-10(th) at the Hynes Convention Center in Boston, MA. A full scale model of Tecogen's InVerde combined heat and power (CHP) technology will be prominently displayed in Booth... Read More

Fluid & Gas Flow Equipment

Modular Molded Manifold Valves offer broad chemical compatibility.

February 26, 2016

Configurable for 12 or 24 Vdc and operating from 41 to 122°F, Series XTA-2E has 1.6 mm dia orifice and interconnected molded ETFE manifold valve blocks. Each of the latter holds one pair of 2-way NC valves interconnected with Perfluor O-rings. Tnternal wetted components include PTFE isolation diaphragm and Perfluor soft valve seal, and additional diaphragm materials are... Read More

Fluid & Gas Flow Equipment

Vehicle Comfort at Minus 40 Degrees

February 26, 2016

New class of materials for shock absorber seals Weinheim, Germany, – With a new high-performance material, Freudenberg Sealing Technologies (FST) is ensuring that shock absorbers can reliably do their job even in extremely low temperatures, down to -40°F . At the same time, the new material mixture, which is coming into use in damper seals for cars and commercial vehicles, is much more... Read More