Marwin Ball Valves, Div. Of Richards Industries, Inc.    Cincinnati, OH 45209
May 12, 2003 Series 600 Brass Ball Valves are offered in standard and full port threaded, full port solder end, and full port threaded end direct mount. Standard port sizes include ½-2 in. with pressure rating of 400 psi wog, and full port sizes range from ¼â€“4 in. with pressure rating of 600 psi wog. Solder ends for copper tubing range from ½â€“3 in. with pressure rating of 600 psi wog. Direct mount DM600 Series ranges from ¼â€“4 in. with pressure rating of 600 psi wog.

Dixon Valve & Coupling Co.    Chestertown, MD 21620 1135
May 12, 2003 Stainless-steel squeeze clamp works on all types of clamp ferrules to achieve leak-proof connections. Spring-loaded design allows for one-handed assembly. Device hangs on suspended tubing for storage during maintenance or cleaning and is available in 1/2–4 in. sizes.

Sauer-Danfoss    Ames, IA 50010
May 12, 2003 Models CDS 60 and CDS 100 have inlet flows of 60 and 100 lpm, respectively. Control handles mount in various orientations for flexibility. Modular construction allows for control of various work functions from one valve stack. Thicker end sections reduce stack distortion, which nearly eliminates spool bind and external leaks between sections. Numerous spool and control options are available, including on/off electrical control. Applications include construction equipment.

Acme Cryogenics, Inc.    Allentown, PA 18103
May 08, 2003 Available in brass versions to support 5, 8, or 11 cylinders, EZ Block Manifold connects multiple cylinders into one common bank. Compact, modular design aids in set-up, reconfiguration, and expansion. One-piece machined construction maximizes durability. Connections between manifolds are made via flexhose or pipe nipple. Accessories include wall-mount bracket and floor stand.

Upchurch Scientific, Inc.    Oak Harbor, WA 98277
May 07, 2003 Halar® Tubing, offered in 1/8 and 1/16 in. OD, is chemically resistant, yet mechanically stronger than Teflon®, withstanding pressures as high as 6,000 psi. It also withstands radiation and is translucent for flow monitoring.

PIAB Vacuum Products    Hingham, MA 02043
May 07, 2003 Silicone- and textile-free filters allow paint to adhere properly to vehicle surface. They prevent dust and fine particles from being drawn into vacuum pump and escaping into surroundings. Products comply with FDA, GMP, and 3-A requirements and are suitable for powders with particle size of .5 micron and greater, depending on powder properties. Sintered polyethylene body is coated with PTFE.

Hayward Industrial Products, Inc.    Elizabeth, NJ 07207
May 07, 2003 Suited for industrial and commercial applications, SE MAXILINEâ„¢ reduces downtime required for filter media changing. Design incorporates spindle/interlock mechanism with integral QIC-LOCK® clamp, which prevents cover from being opened until vessel has been properly vented. Vessel cannot be re-pressurized until clamp has been fully closed and safety interlock engaged. Low-profile design is available in 3-, 4-, 6-, and 8-bag models, all constructed of stainless steel.

SKF USA, Inc.    Lansdale, PA 19446
May 07, 2003 I-Seal Fail-Safe Air Seal prevents spindle bearing contamination. Unit incorporates I-Beam design that evenly distributes air film around bearing. Seal cannot be damaged due to loss of air pressure, because centrifugal force is used in conjunction with air pressure. Product works at any duty cycle and can be used in high-pressure coolant applications. Air pressure of 5-10 psi continuously purges bearings through radial I-Beam distribution ring.

Parker Hannifin Corp.    Cleveland, OH 44124
May 06, 2003 Suited for operation at pressures to 10,000 psig, Hi Pro valve utilizes 2-piece construction to minimize potential leak paths. Bidirectional valve, fabricated from 316 stainless steel, is available in 1/4, 3/8, and 1/2 in. sizes or 6, 8, 10 and 12 mm metric versions. Design conforms to ANSI/ASME ratings and features 4:1 pressure boundary safety factor. Valve mechanism works on floating ball principle, with dynamic response seats and anti blow-out stem.

ARO - Ingersoll-Rand Fluid Products    Bryan, OH 43506
May 06, 2003 EXP Expert Series Pumps feature stall-free air valve technology and only 4 working parts. Motor offers anti-ice valve configuration as well as trip-rod design that insure positive shift every time. Air section is thermoset vinyl ester and wetted parts are PVDF/Polypropylene for chemical/fluid compatibility. Pumps include ribless fluid caps, convoluted diaphragms, and side-mounted inlet/discharge. They are capable of flows up to 184 gpm.

Kerotest Mfg. Corp.    Pittsburgh, PA 15207
May 06, 2003 Polyballâ„¢ valves are offered in sizes from ½â€“12 in., both full port and standard port versions are available in medium and high density polyethylene and operate to 125 psi within -20 to +140°F temperature range. Valves deliver full traceability forwards and backwards - from customers' installation back to raw materials, including serial number of each fusion joint. Offerings include bubble-tight shut-off and corrosion-resistance.

Applied Porous Technologies, Inc.    Tariffville, CT 06081
Apr 29, 2003 Porous Metal Tubes are produced by isostatically pressing powdered metal in molds, resulting in seamless tube structure that is then sintered to form rigid porous filter tubes. Tubes can be incorporated, with various hardware, into cartridge filters, gas spargers, applicators, and air rollers.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division    Milford, CT 06460
Apr 28, 2003 Metallic Liquidtight Conduit Fittings, offered in ½ and ¾ in. straight body design, feature UL Type 3R, 12, 13, and 4 environmental enclosure ratings. They are 3rd party certified to provide protection from windblown dust and rain, splashing water, hose-directed water, and damage from external ice formation.

Pneumadyne, Inc.    Plymouth, MN 55441
Apr 28, 2003 Miniature, 10 and 15 mm, direct-acting solenoid valves provide space-saving solution for use of single or multiple valves. Lightweight, 2- and 3-way valves are available with various voltages, orifices, and connectors to fit design requirements. Mounting versatility is provided through use of aluminum or acrylic multiple-station manifolds or single bases.

Swagelok Company    Solon, OH 44139 2764
Apr 28, 2003 Series 60 process instrumentation ball valves feature spring-loaded valve seat that exerts constant pressure against ball providing reliable seal in low- and high-pressure conditions. Two-piece chevron, live-loaded packing helps prevent inboard and outboard leakage by compensating for changes in pressure and temperature. Sizes range from ¼-2 in. and 6-25 mm with variety of handle and vent port options available.

Mars Tech    New City, NY 10956
Apr 25, 2003 Alfie 200 high-speed, direct-drive, disc-bowl separator mounts directly on coolant tank and keeps coolants free from oil and bacteria. It features capacity of 60–75 gph, and if desired, operates continuously even when machine tool is not in operation. Centrifuge is intended for use in shops with small number of machine tools. It is also suitable for de-oiling neutral pH wash solutions.

Saint-Gobain Performance Plastics, Tygon Silicone Products    Beaverton, MI 48612
Apr 25, 2003 Sani-Tech STHT-R-HD high purity grade hose features complete biocompatibility and lot traceability. It is made of biopharmaceutical grade platinum silicone with wire-reinforced tubing. Custom colors are available for line identification. Hose is fully autoclavable and sterilizable, imparts no taste or odor, and meets all USP Class VI, FDA, ISO 10993, and EP 3.1.9 standards.

Fisnar Inc.    Wayne, NJ 07470
Apr 23, 2003 Model SV1217 provides finely controlled spray of low- to medium-viscosity fluids and coatings. Spray pattern can be configured by combination of stroke-restrictor adjustments at top of valve, changing discharge nozzle, and by distance from subject. Unit incorporates dual air-control system, self-cleaning outlet nozzle, and positive cut-off. Areas are covered and maintained throughout coating operation without bounce or mist creation. Wetted parts are stainless steel.

Blackhawk Environmental Co.    Glen Ellyn, IL 60137
Apr 21, 2003 Electric Parallel Mount Anchor Pump® is an electrically driven, positive displacement piston jack pump with top head drive motor. Heavy-duty parallel mounted driver makes pump compact enough to fit into enclosed vaults. Controlled pumping matches pumping rate to yield of product in sump. Unit can pump against high head pressure and at great depths. UL listed explosion proof or non-explosion proof motor is available.

EPCO Products Inc.    Fort Wayne, IN 46899-9250
Apr 21, 2003 Aluminum Zero-Leak Gold Plugs do not back out or leak, even in vibration, temperature change, and pressure spike situations. They require no chemical sealants and can be resealed repeatedly without loss of effectiveness or damage to elastomeric backup seal. They are suited for applications where weight conservation is as critical as zero-leak performance or where corrosion or metal incompatibility makes use of steel plugs impractical.