Flexaust Co., Inc., The    Warsaw, IN 46581
Feb 18, 2010 Made from flame retardant materials, Flexaust® Springflex® Artic Duct U features 2 single-ply neoprene coated polyester fabric plies protecting insulation barrier that is reinforced with spring steel wire helix and external PVC coated wear strip. Hose has R4 insulation factor, delivers hot or cold air, and operates over -40 to 250°F. Offered with sewn cuffs on each end or with optional end finishes, hose comes in sizes from 4-20 in. ID and in custom sizes up to 48 in. ID.

Teknor Apex Co.    Pawtucket, RI 02861
Feb 17, 2010 Medalist® MD-500 Series exhibits crystal clarity and mechanical properties comparable to those of PVC - clamp resilience, resistance to kinking and necking, feel, and flexibility - while undergoing minimal color shift upon heat aging after exposure to gamma irradiation. Tested for compliance with ISO 10993-5 cytotoxicity standards, compounds are free of animal-derived materials, phthalates, latex, silicones, and additives not directly required for medical tubing applications.

Parker Hannifin Corp., Precision Fluidics Div.    Hollis, NH 03049
Feb 17, 2010 Supporting flows up to 240 Lpm and inlet pressures to 60 psig, VSO-MAX weighs 70 g and requires less than 2 W of power for operation. Face seal manifold mount design facilitates integration of miniature package, which occupies 0.87 in.³, and exhibits sustained performance rated over 25 million life cycles. Suited for medical, analytical, and pathogen detection devices, valve supports 5, 12, and 24 Vdc standard control voltage ranges.

Parker Hannifin Corp., Precision Fluidics Div.    Hollis, NH 03049
Feb 16, 2010 Targeted at respiratory and anesthesia markets, low power PACE Hf offers wide controllable flow range from 0.5-500 Lpm with 0-10 Vdc analog input controllable to 0.001 Vdc increments. Miniature unit features integrated sensor port that allows for simple, closed loop feedback. Typical hysteresis is less than 4% (full scale), while response time is less than 20 msec (full cycle).

Casella USA    Amherst, NH 03031
Feb 15, 2010 TUFF Pro personal air sampling pump includes suite of programming options to assist users in collecting samples of dusts, fumes, vapors, lead, and asbestos. In Time Weighed Average mode, hygienist can program pump to start and pause throughout workday. Rugged device's delayed monitoring allows setup, upload, and handover of pump to another technician for on-site testing near required test time. It also stores data for up to 100 runs that can be downloaded for analysis.

EXAIR Corporation    Cincinnati, OH 45249-1621
Feb 12, 2010 Available in lengths from 3-54 in., PVDF Super Air Knife(TM) provides laminar curtain of air that can be used to blowoff, clean, and dry in highly corrosive environments not suitable for stainless steel. Unit consists of PVDF, Hatelloy® C-276 alloy screws, and PTFE shim to adjust force and flow of airstream. Components offer resistance to UV light, inorganic chemicals, solvents, ozone, weather, fungi, chlorinated hydrocarbons, highly corrosive acids, weak bases, and salts.

Colder Products Co.    St. Paul, MN 55114
Feb 10, 2010 Utilizing 3-step connection process, AseptiQuik(TM) Connectors minimize complexity and risk of operator error. Audible click confirms initial connection, while pull tabs allow simultaneous membrane removal, and twist of integrated lock ring provides secure final assembly. Enabling sterile media transfer, even in non-sterile environments, AseptiQuik(TM) Connectors are suited for seed trains applications, suite-to-suite transfer, and filling operations.

Colder Products Co.    St. Paul, MN 55114
Feb 10, 2010 Targeting medical device OEMs, FitQuik(TM) Fittings offer variety of options, including color coding accessories for luer connectors, tube fittings with expanded hose barb sizes, and ¼-28 in. UNF threads. Units are available in nylon and medical-grade polypropylene, and are designed for tubing sizes from 1/16-3/8 in.

Vaccon Co., Inc.    Medway, MA 02053
Feb 09, 2010 Modified material transfer pumps move various types of wrapped materials from one place to another without unwrapping or unraveling. Powered by compressed air, they offer instantaneous vacuum flow and high air velocity, allowing material to pass through at high speeds without interference. Pumps are available in anodized aluminum in 16 standard sizes, with internal diameters from 1/8-4 in., and vacuum flow rates from 3-375 scfm.

Vaccon Co., Inc.    Medway, MA 02053
Feb 09, 2010 Ultra-miniature, air-powered venturi vacuum pump is suited for drip control in liquid dispensing or liquid transfer applications. Durable pump measures 1.25 in. long and features .56 in. OD with no moving parts. It is designed to operate at input pressures as low as 10 psi and generates vacuum levels from 5-27 in. Hg with maximum 0.45 scfm. Durable pumps can be manufactured in variety of materials for adverse operating conditions.

Vaccon Co., Inc.    Medway, MA 02053
Feb 08, 2010 Interchangeable cartridge is removed from body of Mid-Series single-stage venturi pumps by pushing it out of air supply port and reinserting new one. Straight-thru design of nozzle and diffuser allows debris to pass through cartridge assembly without clogging, enabling maintenance-free pump with no moving parts. Cartridges are color-coded and grooved based on performance characteristics. They are manufactured with anodized aluminum and operate at 80 psi.

Keller Products, Inc.    Lexington, MA 02420-0001
Feb 08, 2010 Permitting pre-scheduled, untended operation of any compressed air-driven equipment, timer ball valve opens and closes compressed air line for selected duration on programmable schedule. Quartz controlled timer permits multiple cycles each day. Unit is supplied with 115 V cord and plug, and one 1 in. NPT ball valve for compressed air.

Eaton Filtration    Iselin, NJ 08830
Feb 04, 2010 Constructed of carbon steel, Type 304 SS, or Type 316 SS, Flowline II is available in standard No. 1 and No. 2 bag vessel sizes with 2 in. NPT and 2 in. flanged end connections. No. 2 size unit is also available with 3 in. flanges in side in/side out, loop, and side in/bottom out configurations. Rated for service at 150 psi at 250°F, all units feature one-piece body, adjustable legs, concave displacement cover that prevents spills when accessing vessel to change bags.

W. L. Gore & Associates, Inc.    Elkton,, MD 21921
Feb 03, 2010 Used as drop-in replacements for existing filters, GORE® Filters for High-Purity Chemical Processors optimize flow while maximizing particle retention. Units incorporate hydrophilic PTFE filtration media, which does not require IPA pre-wetting and completely eliminates de-wetting issues in most applications. Filters are suited for filtration of aqueous and high-surface-tension liquids, especially where outgassing or bubbles are a concern.

Hunter Industries    Cary, NC 27511
Feb 03, 2010 Pro-Spray® Fixed Pattern Nozzles feature female-threaded design for compatibility across many brands. Spray patterns feature precise edges resulting from consistent trajectory from all sides, ensuring uniform coverage across entire pattern. Nozzles also minimize wind drift by emitting at optimum droplet size. There are 5 radii available, from 8-17 ft, each featuring adjustment screw for fine tuning.

Bell & Gossett    Morton Grove, IL 60053
Feb 01, 2010 Energy efficient ecocirc®e3 series recirculating pumps feature Electronically Commutated Motor with spherical motor design, replacing conventional components such as shaft, seal, and bearing assembly. Rotor/impeller is only moving part and is magnetically balanced on stationary ceramic bearing inside pump housing, providing silent operation. Pump is also available with timer module to convert it into timer-controlled unit.

FIKE Corporation    Blue Springs, MO 64015 4263
Feb 01, 2010 Explosion Isolation Pinch Valve (EIPV) prevents deflagration propagation through interconnecting pipes or conveying lines, thus protecting additional process equipment and/or operating locations. CE and ATEX tested and certified product can be mounted either vertically or horizontally, can be reset by users, and is virtually maintenance free. Valve has heavy duty cast valve body and rugged elastomeric sleeve.

CAT PUMPS    Minneapolis, MN 55449
Jan 28, 2010 Featuring 316 SS liquid-end for corrosion resistance, Models 7CP6111 and 7CP6171 are suited for pumping liquids such as sea water in small SWRO installations, DI water for misting, or hot water for sterile cleaning systems. Available in either belt-drive or direct-drive models, pumps deliver 10.5 gpm up to 2,000 psi. Units include dipstick for oil level check and STG V-packings to maximize seal life.

Keystone Filter Div., Met-Pro Corp.    Hatfield, PA 19440
Jan 28, 2010 Designed for lakefront properties, small campgrounds, and trailer parks, multi stage filter system combines sub-micronic pre-filtration with advanced nanofiltration to remove dirt and sediment and reduce virus, bacteria, cysts, and other submicron particles. Features included are 222 housings, GIANT® 4½ in. O.D. cartridges, multi-stage brackets, NSF approved components and FDA-grade materials.

Emerson Process Management    Austin, TX 78754
Jan 25, 2010 Available in 1, 2, and 3 in. sizes, EZHSO Series and slam-shut EZHSO-OSX Series incorporate spring cartridge that offers fail-to-open alternative, ensuring gas delivery and maximizing uptime. Whisper Trim® Technology prevents noise at source, and cage can be retrofitted in field. Providing 1,500 psig inlet/outlet rating, regulators feature top-entry maintenance, bubble-tight shutoff, and true no-bleed design that eliminates emissions for high pressure pipelines.