Polyester Compounds

Chemical Processing & Waste Management, Materials & Material Processing, Printing & Duplicating Equipment

Tekra Showing at DScoop 11 in San Antonio, TX

February 22, 2016

New Berlin WI – Tekra, A Division of EIS, Inc. an inaugural member of DScoop and an appointed HP Indigo Preferred Partner, will be exhibiting at DScoop in San Antonio for their 11th year at booth #549. Tekra will be featuring several plastic substrates for both the Indigo presses, as well as, various inkjet press types. “Our time-tested Dura-Go products are coated with a top-quality... Read More

Chemical Processing & Waste Management, HVAC, Materials & Material Processing

DuPont Polymers in New Tankless Water Heaters Help Homeowners Meet New Regulations

June 12, 2015

Seisco Introduces Innovative Solutions for Single-Family Homes and Multi-Family Constructions WILMINGTON, Del.  – Seisco International is introducing the next generation Supercharger tankless water heater unit, which uses DuPont engineering polymers in several components.  The units can help homeowners meet National Appliance Energy Conservation Act (NAECA) requirements, which were... Read More

Chemical Processing & Waste Management, Materials & Material Processing

UV Inkjet Printable Polyester minimizes iridescence.

June 3, 2015

By virtually eliminating iridescence, JetView™ UV Inkjet Marnot Advanced Low Iridescence Polyester allows UV inkjet printed applications to be viewed clearly from all angles without seeing distracting rainbow pattern. Product is hardcoated on one side for scratch and chemical resistance, and has print receptive coating on other side that allows film to pass ASTM D3359 cross hatch tape test. Available in 5, 7, and 10 mil gauges, JetView is suited for variety of reverse printed applications. Read More

Chemical Processing & Waste Management, HVAC, Materials & Material Processing, Packaging Equipment

Bayer Materials Withstand Demanding Conditions and Meet Requirements for Innovative Medical Devices

February 13, 2015

ANAHEIM, Calif. – Increasingly, innovative medical applications place further importance on the success of the materials they use. When patients' health, mobility and comfort are involved, reliability and durability are crucial. Bayer MaterialScience LLC steps up to the challenge offering original equipment manufacturers (OEMs) a wide range of material solutions for their medical... Read More

Chemical Processing & Waste Management

Polycarbonate Blend targets wearable medical devices.

February 13, 2015

Providing resistance against body lotions and other chemicals, Makroblend® M525 Polycarbonate/Polyester meets testing requirements of ISO 10993-5 (Cytotoxicity) and ISO 10993-10 (Irritation and Sensitization) for biocompatibility. Plastic grade exhibits moldability and dimensional stability, and can be color-matched to satisfy design criteria of wearable devices. In addition, product offers optimized overmolding performance in devices with molded-in windows or tubes. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Polyester Compound suits LED TV applications.

December 3, 2014

Developed specifically for LED electronic packaging applications that utilize surface mount technology, Lavanta® 5115 WH 224 consists of 15% glass fiber-reinforced polycyclohexylene terephthalate compound, which can be molded at 257°F and still maintains 100% crystallinity. Product has high reflectivity of greater than 95% with optimal whiteness retention, even after thermal and light aging. With tensile strength of 11,312 psi and elongation of 1.6%, compound ejects easily from tool. Read More

Chemical Processing & Waste Management, Paints & Coatings

Acrylic Modified Polyester Resin is used for coating surfboards.

July 8, 2014

Silmar® SIL66BE-2880 has undergone QUV tests is suitable for surfboard laminating. Formulated to be tough, resin minimizes occurrence of compression dimples and exhibits impact resistance that helps reduce stress and deck cracks. Product cures water clear and also exhibits accelerated wet out of glass. Read More

Chemical Processing & Waste Management, Materials & Material Processing, Packaging Equipment, Green & Clean

CapaT Significantly Enhances Biodegradability & Bioplastic Performance

July 11, 2013

Perstorp, world leader in specialty chemicals, will be launching its proven technology CapaT Thermoplastic products for bioplastics at K Fair, 2013. Considerable investments have been made in caprolactones to ensure we deliver new CapaT products that address key issues related to plastic materials, such as sustainability, biodegradability and product safety. Bioplastics are receiving... Read More

Chemical Processing & Waste Management, Materials & Material Processing, Textile Industry Products

Low Lead Polyester is engineered for industrial use.

June 21, 2013

Developed with low lead formulation, 600 X 300 Denier PVC Backed Polyester features 0.55 mm vinyl embossed backing. It is engineered for industrial applications including use in bags, luggage, indoor covers, and custom cases. Product is available in CPSIA Compliant options. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Ticona to Exhibit High-Temperature Polymers at ITB Automotive Engine Air and Cooling 2013

June 10, 2013

Ticona, the engineering polymers business of Celanese Corporation, will showcase its high-temperature polymers for under-hood and powertrain applications during the ITB Group Automotive Engine Air and Cooling 2013 conference on Thursday, June 6, at the Sheraton Detroit Novi Hotel in Michigan. The Ticona exhibit will highlight the newest Fortron® polyphenylene sulfide (PPS) material... Read More

Chemical Processing & Waste Management

All Grades of GPO Available at Emco Plastics!

March 14, 2013

GPO (Glass Polyester) is available at Emco Plastics, Cedar Grove, NJ. GPO is an industrial sheet produced using polyester resin and fiberglass reinforcement. GPO is highly valuable in applications where stable temperatures, tracking resistance, and low moisture absorption are essential. This material is available in 3 different grades as well as channels and angles. GPO-1 is a general purpose... Read More

Chemical Processing & Waste Management, Materials & Material Processing

Polyester Compound targets LED TV applications.

October 4, 2012

Developed specifically for LED electronic packaging applications that utilize surface mount technology, Lavanta® 5115 WH 011 consists of 15% glass fiber-reinforced injection molding compound. Material provides greater than 95% reflectivity with optimized whiteness retention, even after thermal and light aging. Able to fill very thin-walled sections required for low-profile, side-view LEDs, compound offers dimensional stability due to low moisture absorption. Read More

Chemical Processing & Waste Management

PBT Polyester Resin Shapes withstand high impacts.

September 19, 2012

Approved for direct contact with food by FDA and other US and European agencies, Hydex® 4101 and lubricated Hydex® 4101L stock shapes are suitable for machined parts in food processing equipment. Hydex® 4101 also offers resistance to typical cleaning chemicals such as chlorine and caustic solutions, features absorption rate as much as 15 times less than nylon, and can withstand high impacts. Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment, Materials & Material Processing, Paints & Coatings, Green & Clean

Electrolube Launch New Polyester and Silicone Resins at SMTA International

September 13, 2012

Electrolube, the global manufacturer at the forefront of chemicals technology for the electronics, automotive and industrial manufacturing industries, will launch an innovative clear polyester resin and showcase the company's newest silicone and "green" aerosol products at SMTA International in Florida, booth 637. The conference and exhibition will take place from the 14-18 October at the Walt... Read More

Chemical Processing & Waste Management, Paints & Coatings

Electrolube Launch Isocyanate Free and Flame Retardent Polyester Resins at Assembly & Automation Technology Expo

June 27, 2012

Electrolube, the global manufacturer of materials for electronics, automotive and manufacturing, will launch two new polyester resins to the US market at the Assembly & Automation Technology Expo (AATE) in Chicago on the 19-21 June on booth 947.<4444>PE7600 is a high performance, opaque, flame retardant encapsulation resin developed primarily for potting delicate electronic and electrical... Read More

Chemical Processing & Waste Management, Materials & Material Processing

Ticona Celcon® / Hostaform® POM and Other Brands Now Available for Direct Sale to Customers in Japan

May 30, 2012

Florence, Ky., Sulzbach, Germany, Shanghai - Ticona Japan, a business of Celanese Corporation, today announced it will sell for the first time in Japan both Celcon® and Hostaform® acetal copolymer (POM) along with other Ticona brands of high-performance thermoplastics.<4444> "Since the move to our new offices in Tokyo is complete, our team is well positioned to sell our complete line of... Read More

Chemical Processing & Waste Management, Materials & Material Processing, Packaging Equipment

Arkema Showcases at PLAST Milan 2012

May 16, 2012

PLAST, one of the world's leading events for the plastics and rubber industry, is held in Milan every three years. The 2012 edition from May 8th to 12th will enable Arkema to reaffirm its position as a key player of the polymer and plasticiser industry with its ranges of PMMA acrylic glass, functional polyolefins, heat-sealing copolyamides, PVDF, plastic additives and organic peroxides. These... Read More

Chemical Processing & Waste Management, Paints & Coatings

Electrolube Launches a Hazard-Free, Flame Retardant Polyester Resin at SMT Hybrid Packaging

May 8, 2012

With a number of Electrolube's new products showcasing for the first time at SMT Hybrid Packaging, the global electro-chemicals manufacturer has announced it will launch a further new isocyanate free encapsulation resin alongside the company's newest silicone resin products and CO2 reducing aerosol technologies.<4444>PE7600 is a high performance, opaque, flame retardant encapsulation resin... Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment, Materials & Material Processing, Paints & Coatings, Green & Clean

Electrolube Launches Isocyanate-Free Clear Polyester Resin at SMT Hybrid Packaging

April 19, 2012

Electrolube, the global manufacturer at the forefront of electro-chemicals technology, will launch an innovative clear polyester resin and showcase the company's newest "green" and Silicone Resin products for the electronics, automotive and industrial manufacturing industries, at SMT Hybrid Packaging on the 8-10 May at the Messezentrum in Nuremberg, booth 7-524.<4444>The new PE7500 Clear... Read More

Chemical Processing & Waste Management

Polyester Resin provides hybrid powder coatings alternative.

September 28, 2010

Developed to meet demand for epoxy-free coating systems, epoxy-free Uralac® Veranda(TM) P 542 features optimized processing properties as well as flow characteristics in highly filled coatings. This HAA-curable resin, designed for coating systems that can replace epoxy hybrid systems with equal or better performing system, exhibits resistance to chemicals, staining, and boiling water. It also offers outdoor durability with minimal yellowing. Read More