Vents

Preassembled Roof Vent reduces installation effort.
Vents

Preassembled Roof Vent reduces installation effort.

Helping increase roof life, Hi-Perf Ridge Vent Slope to Slope Shingled Version provides accurate exhaust airflow at ridge to help prevent heat buildup and moisture accumulation underneath roof covering. Ventilation product features all-metal construction, is engineered for maximum performance, and withstands winds up to 120 mph over 20 years. NFA requirements are calculated for each project's...

Read More »
Relief Valves

Pressure/Vacuum Conservation Vents support HEPA filter option.

Shand & Jurs Models 94020 Conservation Vent (Pressure/Vacuum), 94115 Vacuum Vent (Side Mounted), and 94110 Vacuum Vent are available withÂ- option that incorporates HEPA Filter mounted on vacuum inlet opening. By utilizing HEPA Filter on vacuum side of conservation vent, contaminants are prevented from entering tank and contaminating product. HEPA filter, rated for minimum...

Read More »
Portable Electronic Vents provide waterproof protection.
Vents

Portable Electronic Vents provide waterproof protection.

Intended for smartphones and portable electronic devices, PE3 Series provides typical airflow of 3,300 ml/min/cm³, equalizing internal  pressure, minimizing stress on seals, and eliminating transducer bias. At same time, vents protect internal electronics by serving as barrier against liquid, dust, and dirt. Units are engineered with black oleophobic membrane and gray PET nonwoven...

Read More »
Breather Vent protects automotive electronic housings.
Vents

Breather Vent protects automotive electronic housings.

GORE® PolyVent Compact Series features microporous GORE™ membrane that breathes to allow airflow yet blocks entry of water and contaminants. This provides protection for sensitive components, such as sensors, motors, and control units, as well as pressure equalization. Vent diameter is 14.3 mm, and 3.45 mm installed height minimizes external protrusion and vulnerability to mechanical impacts...

Read More »
Vents

HVAC Contractor Design/Builds Cutting Edge Industrial Ventilation System for Manufacturer

Fabric duct with in-duct tensioning system facilitates energy efficient VFD's; heat recovery from laser, welding and paint processes saves thousands of energy dollars.Â-  Peosta, Iowa – A mechanical contractor's innovative industrial ventilation design is saving the Mi-T-M Corp. tens of thousands of dollars annually in energy savings. The state-of-the-art system provides indoor air...

Read More »
Bilco's Single-Leaf Smoke Vents Receive UL Approval
Vents

Bilco's Single-Leaf Smoke Vents Receive UL Approval

Type SV Products Now Tested and Certified to Meet UL 793 Requirements NEW HAVEN, CTÂ- — The Bilco Company’s Type SV Single Leaf Automatic Smoke Vents, available with a metal cover or a domed polycarbonate cover for natural daylighting, have received UL approval per the UL 793 standard for Automatically Operated Roof Vents for Smoke and Heat. UL is a global independent safety science...

Read More »
Solar Roof Vent carries 750 cfm max airflow rating.
DC to AC Power Supplies (Inverters)

Solar Roof Vent carries 750 cfm max airflow rating.

Designed to conserve energy and for facilitated installation, Master Flow® Green Machine™ features impact-resistant construction that withstands hail and foreign object impact. Solar-Powered model has 20 W integral solar panel and adjustable thermostat/humidistat and helps reduce attic cooling expense. Supplied with adjustable thermostat, Dual-Powered model switches automatically between...

Read More »
Vents

Adhesive Vent extends life of outdoor electronic enclosures.

Increasing reliability when exposed to changing weather and environmental conditions, Series VE9 Adhesive Vent enables outdoor electronic enclosures to be designed with normal seals and gaskets without necessitating ruggedized models. Adhesive and all-ePTFE construction facilitates integration by allowing vent to be mounted on housing interior or exterior. Combined with UL-listed ePTFE membrane,...

Read More »
Protective Vent suits large outdoor electronic enclosures.
Vents

Protective Vent suits large outdoor electronic enclosures.

Specifically engineered for outdoor enclosures with volume in excess of 200 L, GORE® PolyVent XL enables internal pressure to remain equalized during changes in environmental temperatures, helping to prevent seal failure. Constructed of breathable membrane, IP69K-rated vent equalizes internal pressure by allowing air to flow freely into and out of housing at rate of 16 Lpm at 12 mbar....

Read More »
Gore Announces Enhanced Venting and Cooling Solutions for Improved Performance at CTIA 2013
Electrical Enclosures

Gore Announces Enhanced Venting and Cooling Solutions for Improved Performance at CTIA 2013

Elkton, Maryland – At the CTIA 2013™ Mobile Marketplace in Las Vegas, Nevada, May 21-23, in Booth 4234, W. L. Gore & Associates will be debuting its latest venting and cabinet cooling products that enable the telecommunications industry to remain connected and protected. Gore will be displaying new venting products and cooling filters that ensure reliability and long-lasting performance...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers